1000+ Chemical Engineering Plant Economics MCQ for NEET [Solved]

1. __________ method for profitability evaluation of a project does not account for investment cost due to land.
A. Net present worth
B. Pay out period
C. Discounted cash flow
D. Rate of return on investment
Answer : B

2. 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost.
A. 1 to 5
B. 10 to 20
C. 25 to 35
D. 35 to 45
Answer : B

3. Which of the following does not come under the sales expenses for a product of a chemical plant?
A. Advertising
B. Warehousing
C. Legal fees
D. Customer service
Answer : C

4. Which of the following is a component of working capital investment?
A. Utilities plants
B. Maintenance and repair inventory
C. Process equipments
D. Depreciation
Answer : B

5. Annual depreciation cost are not constant when, the __________ method of depreciation calculation is used.
A. Straight line
B. Sinking fund
C. Present worth
D. Declining balance
Answer : D

6. Which of the following is not a component of working capital?
A. Raw materials is stock
B. Finished products in stock
C. Transportation facilities
D. Semi-finished products in the process
Answer : C

7. Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost.
A. 10 to 20
B. 35 to 45
C. 55 to 65
D. 70 to 80
Answer : B

8. An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from the time of initial payment to the end of annuity term. Ordinary annuity is used in the calculation of the
A. Manufacturing cost
B. Depreciation by sinking fund method
C. Discrete compound interest
D. Cash ratio
Answer : B

9. 'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from
A. 1.2 to 1.4
B. 2.5 to 2.7
C. 4.2 to 4.4
D. 6.2 to 6.4
Answer : C

10. Fixed charges for a chemical plant does not include the
A. Interest on borrowed money
B. Rent of land and buildings
C. Property tax, insurance and depreciation
D. Repair and maintenance charges
Answer : D

11. Effective and nominal interest rates are equal, when the interest is compounded
A. Annually
B. Fortnightly
C. Monthly
D. Half-yearly
Answer : A

12. Out of the following, the depreciation calculated by the __________ method is the maximum.
A. Diminishing balance
B. Straight line
C. Sum of the years digit
D. Sinking fund
Answer : A

13. An investment of Rs. 100 lakhs is to be made for construction of a plant, which will take two years to start production. The annual profit from the operation of the plant is Rs. 20 lakhs. What will be the payback time?
A. 5 years
B. 7 years
C. 12 years
D. 10 years
Answer : B

14. Following the six-tenth factor rule, if a loglog plot of capacity of the equipment vs. cost of the equipment is made, then a straight line is obtained, whose slope is equal to
A. 0.1
B. 0.6
C. 0.2
D. 0.8
Answer : B

15. A reactor having a salvage value of Rs. 10000 is estimated to have a service life of 10 years. The annual interest rate is 10%. The original cost of the reactor was Rs. 80000. The book value of the reactor after 5 years using sinking fund depreciation method will be Rs.
A. 40,096
B. 43,196
C. 53,196
D. 60,196
Answer : D

16. If 'S' is the amount available after 'n' interest periods for an initial principal 'P' with the discrete compound interest rate 'i', the present worth is given by
A. (1 + i)ⁿ/S
B. S/(1 + i)ⁿ
C. S/(1 + in)
D. S/(1 + n)ⁱ
Answer : B

17. Pick out the wrong statement.
A. Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes
B. A cost index is merely a number for a given year showing the cost at that time relative to a certain base year
C. Turnover ratio of a chemical plant is the ratio of gross annual sales to the fixed capital investment
D. Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary
Answer : D

18. Pick out the wrong statement.
A. Net worth means paid up share capital and reserve & surplus (i.e. shareholders equity)
B. Return on equity = profit after tax/net worth
C. Working capital turnover ratio = sales/net working capital
D. Total cost of production is more than net sales realisation (NSR) at breakeven point
Answer : D

19. Cost of piping in a fluid processing unit (e.g., distillation) of a chemical process plant is about __________ percent of the fixed capital investment.
A. 4
B. 13
C. 22
D. 34
Answer : B

20. Gantt chart (or Bar chart) is helpful in
A. Efficient utilisation of manpower and machines
B. Preparing production schedule
C. Efficient despatching of products
D. Inventory control
Answer : B

21. Which of the following methods of depreciation calculations results in book values greater than those obtained with straight line method?
A. Multiple straight line method
B. Sinking fund method
C. Declining balance method
D. Sum of the years digit method
Answer : B

22. The economic life of a large chemical process plant as compared to a small chemical plant is
A. Only slightly more
B. Much more
C. Slightly less
D. Almost equal
Answer : B

23. The ratio of gross annual sales to the fixed capital investment is termed as the __________ ratio.
A. Cash reserve
B. Capital
C. Turnover
D. Investment
Answer : C

24. Construction expenses are roughly __________ percent of the total direct cost of the plant.
A. 2
B. 10
C. 30
D. 50
Answer : B

25. The payback method for the measurement of return on investment
A. Gives a correct picture of profitability
B. Underemphasises liquidity
C. Does not measure the discounted rate of return
D. Takes into account the cash inflows after the recovery of investments
Answer : C

26. Cost incurred towards __________ in a chemical plant is a component of the utilities cost.
A. Water supply
B. Running a control laboratory
C. Property protection
D. Medical services
Answer : A

27. A balance sheet for an industrial concern shows
A. The financial condition at any given time
B. Only current assets
C. Only fixed assets
D. Only current and fixed assets
Answer : A

28. Generally, income taxes are based on the
A. Total income
B. Gross earning
C. Total product cost
D. Fixed cost
Answer : B

29. Maximum production start up cost for making a chemical plant operational is about __________ percent of the fixed capital cost.
A. 1
B. 5
C. 10
D. 30
Answer : C

30. The inventory of raw materials included in the working capital is usually about __________ months supply of raw materials valued at delivery prices.
A. One
B. Three
C. Six
D. Twelve
Answer : A

31. 'P' is the investment made on an equipment, 'S' is its salvage value and 'n is the life of the equipment in years. The depreciation for Rath year by the sum-of years digit method will be
A. (P - S)/n
B. 1 - (P/S)^1/m
C. (m/n) (P - S)
D. [2 (n - m + 1)/n(n + 1)]. (P - S)
Answer : D

32. Operating profit of a chemical plant is equal to
A. Profit before interest and tax i.e., net profit + interest + tax
B. Profit after tax plus depreciation
C. Net profit + tax
D. Profit after tax
Answer : A

33. Pick out the wrong statement.
A. The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment
B. Annual depreciation rate of buildings in a chemical plant is about 3% of its initial cost
C. Insurance rates on annual basis in a chemical plant may be about 1% of the fixed capital investment
D. In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)
Answer : D

34. Optimum economic pipe diameter for fluid is determined by the
A. Viscosity of the fluid
B. Density of the fluid
C. Total cost considerations (pumping cost plus fixed cost of the pipe)
D. None of these
Answer : C

35. Depreciation is __________ in profit with time.
A. Decrease
B. Increase
C. No change
D. None of these
Answer : A

36. Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment.
A. 10 to 20
B. 20 to 40
C. 45 to 60
D. 65 to 75
Answer : B

37. With increase in the discounted cash flow rate of return, the ratio of the total present value to the initial investment of a given project
A. Decreases
B. Increases
C. Increases linearly
D. Remain constant
Answer : A

38. Pick out the wrong statement.
A. Debt-equity ratio of a chemical company describes the lenders contribution for each rupee of owner's contribution i.e., debt-equity ratio = total debt/net worth
B. Return on investment (ROI) is the ratio of profit before interest & tax and capital employed (i.e. net worth + total debt)
C. Working capital = current assets + current liability
D. Turn over = opening stock + production closing stock
Answer : C

39. In an ordinary chemical plant, electrical installation cost may be about
A. 10-15% of purchased equipment cost
B. 3-10% of fixed caital investment
C. Either (A) or (B)
D. Neither (A) nor (B)
Answer : C

40. For a typical project, the cumulative cash flow is zero at the
A. End of the project life
B. Breakeven point
C. Start up
D. End of the design stage
Answer : B

41. Which of the following is not a current asset of a chemical company?
A. Inventories
B. Marketable securities
C. Chemical equipments
D. None of these
Answer : C

42. __________ taxes are based on gross earnings.
A. Property
B. Excise
C. Income
D. Capital gain
Answer : C

43. Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%?
A. Stainless steel
B. Plain carbon steel
C. Nickel
D. Copper
Answer : B

44. A balance sheet for a chemical plant shows its financial condition at any given date. It does not contain the __________ of the plant.
A. Current asset
B. Current liability
C. Long term debt
D. Profit
Answer : D

45. The depreciation during the year 'n', in diminishing balance method of depreciation calculation, is calculated by multiplying a fixed percentage 'N' to the
A. Initial cost
B. Book value at the end of (n - 1)th year
C. Depreciation during the (n - 1)th year
D. Difference between initial cost and salvage value
Answer : B

46. A series of equal payments (e.g., deposit or cost) made at equal intervals of time is known as
A. Perpetuity
B. Capital charge factor
C. Annuity
D. Future worth
Answer : C

47. The value of a property decreases __________ with time in straight line method of determining depreciation.
A. Linearly
B. Non-linearly
C. Exponentially
D. Logarithmically
Answer : A

48. Total product cost of a chemical plant does not include the __________ cost.
A. Market survey
B. Operating labour, supervision and supplies
C. Overhead and utilities
D. Depreciation, property tax and insurance
Answer : A

49. A present sum of Rs. 100 at the end of one year, with half yearly rate of interest at 10%, will be Rs.
A. 121
B. 110
C. 97
D. 91
Answer : A

50. The 'total capital investment' for a chemical process plant comprises of the fixed capital investment and the
A. Overhead cost
B. Working capital
C. Indirect production cost
D. Direct production cost
Answer : B