1000+ Chemical Engineering Plant Economics MCQ for RRB ALP [Solved]

1. Construction expenses are roughly __________ percent of the total direct cost of the plant.
A. 2
B. 10
C. 30
D. 50
Answer : B

2. Factory manufacturing cost is the sum of the direct production cost
A. Fixed charges and plant overhead cost
B. And plant overhead cost
C. Plant overhead cost and administrative expenses
D. None of these
Answer : A

3. If the interest rate of 10% per period is compounded half yearly, the actual annual return on the principal will be __________ percent.
A. 10
B. 20
C. > 20
D. < 20
Answer : C

4. Gantt chart (or Bar chart) is helpful in
A. Efficient utilisation of manpower and machines
B. Preparing production schedule
C. Efficient despatching of products
D. Inventory control
Answer : B

5. Pick out the wrong statement.
A. Gross revenue is that total amount of capital received as a result of the sale of goods or service
B. Net revenue is the total profit remaining after deducting all costs excluding taxes
C. The ratio of immediately available cash to the total current liabilities is known as the cash ratio
D. Consolidated income statement based on a given time period indicates surplus capital and shows the relationship among total income, costs & profit over the time interval
Answer : B

6. Which of the following elements is not included in the scope of market analysis?
A. Competition from other manufactures
B. Product distribution
C. Opportunities
D. Economics
Answer : D

7. Relative cost of chemical process plants in India is about __________ percent more than the similar plants in U.S.A.
A. 15
B. 35
C. 55
D. 75
Answer : B

8. Which of the following is the costliest material of construction used in pressure vessel construction?
A. Low alloy steel
B. Lead
C. Titanium
D. High alloy steel
Answer : C

9. Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost.
A. 5 to 10
B. 20 to 30
C. 40 to 50
D. 60 to 70
Answer : B

10. A present sum of Rs. 100 at the end of one year, with half yearly rate of interest at 10%, will be Rs.
A. 121
B. 110
C. 97
D. 91
Answer : A

11. An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from the time of initial payment to the end of annuity term. Ordinary annuity is used in the calculation of the
A. Manufacturing cost
B. Depreciation by sinking fund method
C. Discrete compound interest
D. Cash ratio
Answer : B

12. If an amount R is paid at the end of every year for 'n' years, then the net present value of the annuity at an interest rate of i is
A. R [{(1 + i)ⁿ - 1}/ i ]
B. R [{(1 + i)ⁿ - 1}/ i (1 + i)ⁿ]
C. R(1 + i)ⁿ
D. R/(1 + i)ⁿ
Answer : B

13. Which of the following methods of depreciation calculations results in book values greater than those obtained with straight line method?
A. Multiple straight line method
B. Sinking fund method
C. Declining balance method
D. Sum of the years digit method
Answer : B

14. The depreciation during the year 'n', in diminishing balance method of depreciation calculation, is calculated by multiplying a fixed percentage 'N' to the
A. Initial cost
B. Book value at the end of (n - 1)th year
C. Depreciation during the (n - 1)th year
D. Difference between initial cost and salvage value
Answer : B

15. Pick out the wrong statement.
A. Gross margin = net income - net expenditure
B. Net sales realisation (NSR) = Gross sales - selling expenses
C. At breakeven point, NSR is more than the total production cost
D. Net profit = Gross margin - depreciation - interest
Answer : C

16. Functional depreciation of an equipment is the measure of decrease in its value due to its
A. Ageing
B. Wear and tear
C. Obsolescence
D. Breakdown or accident
Answer : C

17. 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost.
A. 1 to 5
B. 10 to 20
C. 25 to 35
D. 35 to 45
Answer : B

18. The ratio of working capital to total capital investment for most chemical plants (except for nonseasonal based products) is in the range of __________ percent.
A. 0.1 to 1
B. 1 to 2
C. 10 to 20
D. 50 to 60
Answer : C

19. Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost.
A. 10 to 20
B. 35 to 45
C. 55 to 65
D. 70 to 80
Answer : B

20. Depreciation
A. Costs (on annual basis) are constant when the straight line method is used for its determination
B. Is the unavoidable loss in the value of the plant, equipment and materials with lapse in time
C. Does figure in the calculation of income tax liability on cash flows from an investment
D. All (A), (B) and (C)
Answer : D

21. 'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from
A. 1.2 to 1.4
B. 2.5 to 2.7
C. 4.2 to 4.4
D. 6.2 to 6.4
Answer : C

22. A balance sheet for a chemical plant shows its financial condition at any given date. It does not contain the __________ of the plant.
A. Current asset
B. Current liability
C. Long term debt
D. Profit
Answer : D

23. Cost of piping in a fluid processing unit (e.g., distillation) of a chemical process plant is about __________ percent of the fixed capital investment.
A. 4
B. 13
C. 22
D. 34
Answer : B

24. Generally, income taxes are based on the
A. Total income
B. Gross earning
C. Total product cost
D. Fixed cost
Answer : B

25. __________ of depreciation calculation accounts for the interest on investment.
A. Straight line method
B. Declining balance
C. Both (A) and (B)
D. Neither (A) nor (B)
Answer : D

26. The 'total capital investment' for a chemical process plant comprises of the fixed capital investment and the
A. Overhead cost
B. Working capital
C. Indirect production cost
D. Direct production cost
Answer : B

27. For a typical project, the cumulative cash flow is zero at the
A. End of the project life
B. Breakeven point
C. Start up
D. End of the design stage
Answer : B

28. Effluent treatment cost in a chemical plant is categorised as the __________ cost.
A. Fixed
B. Overhead
C. Utilities
D. Capital
Answer : C

29. Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%?
A. Stainless steel
B. Plain carbon steel
C. Nickel
D. Copper
Answer : B

30. Pick out the correct statement.
A. Difference between income and expense is termed as gross revenue
B. Unamortised cost is the difference between the original cost of a property and all the depreciation charges made to date
C. Sum-of-the-years-digits methods of depreciation calculation accounts for the interest on the investment
D. Scrap value is the net amount of money obtainable from the sale of used property over and above any charges involved in its removal & sale
Answer : B

31. In which of the electric power generation system, the operating cost is minimum?
A. Thermal
B. Nuclear
C. Hydroelectric
D. Fast breeder reactor
Answer : C

32. The value of a property decreases __________ with time in straight line method of determining depreciation.
A. Linearly
B. Non-linearly
C. Exponentially
D. Logarithmically
Answer : A

33. A balance sheet for an industrial concern shows
A. The financial condition at any given time
B. Only current assets
C. Only fixed assets
D. Only current and fixed assets
Answer : A

34. Pick out the wrong statement.
A. Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes
B. A cost index is merely a number for a given year showing the cost at that time relative to a certain base year
C. Turnover ratio of a chemical plant is the ratio of gross annual sales to the fixed capital investment
D. Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary
Answer : D

35. Which of the following is a component of working capital investment?
A. Utilities plants
B. Maintenance and repair inventory
C. Process equipments
D. Depreciation
Answer : B

36. An investment of Rs. 1000 is carrying an interest of 10% compounded quarterly. The value of the investment at the end of five years will be
A. 1000 (1 + 0.1/4)²⁰
B. 1000 (1 + 0.1)²⁰
C. 1000 (1 + 0.1/4)⁵
D. 1000 (1 + 0.1/2)⁵
Answer : A

37. Gross earning is equal to the total income minus
A. Total product cost
B. Fixed cost
C. Income tax
D. None of these
Answer : A

38. Effective and nominal interest rates are equal, when the interest is compounded
A. Annually
B. Fortnightly
C. Monthly
D. Half-yearly
Answer : A

39. Pick out the wrong statement.
A. Debt-equity ratio of a chemical company describes the lenders contribution for each rupee of owner's contribution i.e., debt-equity ratio = total debt/net worth
B. Return on investment (ROI) is the ratio of profit before interest & tax and capital employed (i.e. net worth + total debt)
C. Working capital = current assets + current liability
D. Turn over = opening stock + production closing stock
Answer : C

40. Scheduling provides information about the
A. Proper utilisation of machines
B. Means to minimise idle time for machines
C. Time of completion of job
D. Time of starting of job and also about how much work should be completed during a particular period
Answer : D

41. In financial accounting of a chemical plant, which of the following relationship is invalid?
A. Assets = equities
B. Assets = liabilities + net worth
C. Total income = costs + profits
D. Assets = capital
Answer : D

42. Pick out the wrong statement.
A. The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment
B. Annual depreciation rate of buildings in a chemical plant is about 3% of its initial cost
C. Insurance rates on annual basis in a chemical plant may be about 1% of the fixed capital investment
D. In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)
Answer : D

43. Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of the plant = original cost × (index value at present/ index value at time original cost was obtained). The most major component of this cost index is
A. Fabricated equipment and machinery
B. Process instruments and control
C. Pumps and compressor
D. Electrical equipments and material
Answer : A

44. Maximum production start up cost for making a chemical plant operational is about __________ percent of the fixed capital cost.
A. 1
B. 5
C. 10
D. 30
Answer : C

45. Profit is equal to revenue minus
A. Book value
B. Total cost
C. Operating cost
D. None of these
Answer : B

46. Expenditure on research and development (R & D) is categorised as the __________, while making an estimate of the total product cost for a chemical plant.
A. Overhead cost
B. Fixed expenses
C. General expenses
D. Direct production cost
Answer : C

47. The amount of simple interest during 'n' interest period is (where, i = interest rate based on the length of one interest period, p = principal)
A. p.i.n.
B. p(1 + i.n)
C. p(1 + i)n
D. p(1 - i.n)
Answer : A

48. Direct costs component of the fixed capital consists of
A. Contingencies
B. Onsite and offsite costs
C. Labour costs
D. Raw material costs
Answer : B

49. The payback method for the measurement of return on investment
A. Gives a correct picture of profitability
B. Underemphasises liquidity
C. Does not measure the discounted rate of return
D. Takes into account the cash inflows after the recovery of investments
Answer : C

50. Annual depreciation cost are not constant when, the __________ method of depreciation calculation is used.
A. Straight line
B. Sinking fund
C. Present worth
D. Declining balance
Answer : D