1000+ Multimedia and Graphics Multiple Choice Question Answer [Solved]

1. ISP stands for,
A. Information Standard Processing
B. Instruction Set Processor
C. Interrupt Service Procedure
D. Interchange Standard Protocol
Answer : B

2. Adding _________ to objects on your slides not only controls the flow of information, but adds interest to your presentation.
A. background
B. animation
C. transition
D. popups
Answer : B

3. RGB system needs ________ of storage for the frame buffer.
A. 100 megabytes
B. 10 megabytes
C. 3 megabytes
D. 2 Gb
Answer : C

4. The internal Components of the processor are connected by _______ .
A. Memory bus
B. Processor bus
C. Processor intra-connectivity circuitry
D. Rambus
Answer : B

5. a polygon in which the line segment joining any 2 points within the polygon lies completely inside the polygon is called _________
A. convex polygon
B. concave polygon
C. both a and b
D. hexagon
Answer : A

6. random-scan monitors typically offer ________ color choices.
A. Only a few
B. wide range
C. just 1 or 2
D. moderate range of
Answer : A

7. The process which divides each element of the picture into its visible and invisible portions, allowing the invisible portion to be discarded is called __________
A. clipping
B. Windowing
C. both a and b
D. Projecting
Answer : A

8. The registers,ALU and the interconnection between them are collectively called as _____ .
A. Process route
B. information path
C. Information trail
D. data path
Answer : D

9. The point at which a set of projected parallel lines appear to coverage is called as a ?
A. vanishing point
B. convergence point
C. point of delusion
D. point of illusion
Answer : A

10. ______________ is the special effect used to introduce each slide in a slide presentation.
A. Animation
B. Transition
C. Mapping
D. Bulleting
Answer : B

11. The first viewing parameter we must consider is the ____________
A. viewing window
B. shift vector.
C. view reference point.
D. view reference plane
Answer : C

12. ______ is used to choose between incrementing the PC or performing ALU operations .
A. Multiplexer
B. Conditional codes
C. Control unit
D. None of these
Answer : A

13. The smallest addressable screen element. Is called_______
A. Pixel
B. Graph
C. voltage level
D. color information
Answer : A

14. Length of shift register in bits is equal to _________
A. one word
B. A single scan lines
C. number of scan lines
D. One bit
Answer : C

15. A smaller version of an image is called a:
A. thumbnail
B. bitmap
C. portable network graphic
D. clipart
Answer : A

16. A method used to test lines for total clipping is equivalent to the
A. logical XOR operator
B. logical OR operator
C. logical AND operator
D. both a and b
Answer : C

17. The best hidden surface removal method used for complex scenes with more than a few thousand surfaces is ?
A. octree method
B. depth sorting method
C. depth buffer algorithm
D. a and c
Answer : D

18. when the projection is obtained by projecting points along parallel lines that are not perpendicular to the projection plane is called _________
A. isometric projection.
B. perspective projection
C. oblique projection
D. cavalier projection
Answer : C

19. Length of shift register in bits is equal to _________
A. one word
B. A single scan lines
C. number of scan lines
D. One bit
Answer : C

20. Which of the register/s of the processor is/are connected to Memory Bus ?
A. IR
B. PC
C. MAR
D. Both a and b
Answer : C

21. A ____________ is a series of slides displayed in a particular sequence.
A. placeholder
B. template
C. layout
D. slide show
Answer : D

22. The transformation that produces a mirror image of an object relative to an axis is called __________
A. rotation
B. translation
C. reflection
D. both a and b
Answer : C

23. The NOR gate is complement of ..
A. OR gate
B. AND gate
C. NOT gate
D. NAND gate
Answer : A

24. The SRGP package provides the ________ to wide the variety of display devices.
A. interface
B. connection
C. link
D. way
Answer : A

25. The ________ master controls the format and placement of the titles and text you type on slides, as well as, background items and graphics you want to appear on every slide.
A. copyright
B. slide
C. design
D. layout
Answer : C

26. Replicating pixels is one of the methods of __________
A. Thick primitives
B. thin primitives
C. stylish primitives
D. both a and b
Answer : A

27. The instruction -> Add LOCA,R0 does,
A. Adds the value of LOCA to R0 and stores in the temp register
B. Adds the value of R0 to the address of LOCA
C. Adds the values of both LOCA and R0 and stores it in R0
D. Adds the value of LOCA with a value in accumulator and stores it in R0
Answer : C

28. A _____ is a digital circuit that performs the inverse operation of decodes.
A. multiplexer
B. adder
C. subtractor
D. encoder
Answer : D

29. The display processor is also called a __________
A. graphics controller
B. display coprocessor.
C. both a and b
D. out put device for graphics
Answer : C

30. Reflection of a point about x-axis, followed by a counter-clockwise rotation of 900 , is equivalent to reflection about the line ?
A. y = - x
B. x = -y
C. x + y = 1
D. x = y
Answer : D

31. Graphics software acts as a very powerful tool to create _________
A. Images
B. animated pictures
C. both a and b
D. system interface
Answer : C

32. A ____________ can be added to your presentation and then used to go to a variety of locations ---- for example, a web address, an e-mail address, a custom show or document, just to name a few.
A. menulink
B. toollink
C. hyperlink
D. slidelink
Answer : C

33. _______ is used to store data in registers .
A. JK flip flop
B. D flip flop
C. RS flip flop
D. none of these
Answer : B

34. The phenomenon of having a continuous glow of a beam on the screen even after it is removed is called as ?
A. Fluorescence
B. Phosphorescence
C. Persistence
D. Incandescence
Answer : B

35. The relationship among the data and objects which are stored in the database called application database, and referred by the _________
A. Application programs
B. application model
C. graphics display
D. both a and b
Answer : A

36. A ________ displays a list of commands and usually appears in the toolbar at the top of the screen.
A. view
B. kit
C. menu
D. list
Answer : C

37. A two dimensional rotation is applied to an object by repositioning it along a _________
A. circular path in the x-y plane.
B. straight path in the x-y plane.
C. diagonals path in the x-y plane.
D. upward in the x-y plane.
Answer : A

38. A transformation that slants the shape of objects is called the _________
A. shear transformation
B. translation
C. reflection
D. both a and b
Answer : A

39. Devices that are used primarily to transport data between the processor and the user are known as ____
A. Data transfer device
B. Basic storage devices
C. Networking devices
D. Data presentation device
Answer : D

40. Designed to create a particular look, a __________ contains color schemes, slide and title masters with custom formatting and fonts styles.
A. template
B. presentation
C. slide
D. background
Answer : A

41. Slide and title masters contain ___________ that reserve spaces for text and footers such as date, time and slide number.
A. reservations
B. documents
C. spaces
D. placeholders
Answer : D

42. The region code 0000 represents the _________
A. viewing window
B. left clipping window
C. right clipping window
D. bottom clipping window
Answer : A

43. The process of selecting and viewing the picture with different views is called _________
A. Windowing
B. clipping
C. projecting
D. both a and b
Answer : A

44. Hue of color is related to ?
A. Wavelength
B. Saturation
C. Incandescence
D. Luminance
Answer : A

45. Images included in many software titles are called _________.
A. clipart
B. .jpg files
C. popups
D. .tiff files
Answer : A

46. The process of determining the appropriate pixels for representing picture or graphics object is known as _______
A. rasterization,
B. animation
C. both a and b
D. representation
Answer : A

47. In perspective projection, the lines of projection are not parallel. Instead, they all coverage at a single point called ________
A. Center of projection
B. projection reference point.
C. center of projection or projection reference point
D. interaction point
Answer : C

48. The purpose of display processor is _________ from the graphics routine task
A. to free the CPU
B. To free the secondary memory
C. to free the main memory
D. Both a and c
Answer : A

49. Line produced by moving pen is _______ at the end points than the line produced by the pixel replication.
A. thin
B. straight
C. thicker
D. both a and b
Answer : C

50. The line 2x-y+4=0, if clipped against this window will connect the points ?
A. (0, 1) and (3, 3)
B. (0, 1) and (2, 3)
C. (1, 2) and (4, 2)
D. None of above
Answer : D