CAT - Heat & Mass Transfer 1000+ MCQ [Solved] PDF Download

1. Depending on the radiating properties, body will be transparent when
A. P = 0, x = 0 and a = 1
B. P=1, x = 0, and a = 0
C. P = 0, T= 1, and a = 0
D. X = 0, a + p = 1
Answer : C

2. Thermal diffusivity is a
A. Function of temperature
B. Physical property of a substance
C. Dimensionless parameter
D. All of these
Answer : B

3. The unit of Stefan Boltzmann constant is
A. Watt/cm² °K
B. Watt/cm4 °K
C. Watt²/cm °K?
D. Watt/cm² °K?
Answer : D

4. Heat conducted through per unit area and unit thick face per unit time when temperature difference between opposite faces is unity, is called
A. Thermal resistance
B. Thermal coefficient
C. Temperature gradient
D. Thermal conductivity
Answer : D

5. Thermal conductivity of air with rise in temperature
A. Increases
B. Decreases
C. Remain constant
D. May increase or decrease depending on temperature
Answer : A

6. 40% of incident radiant energy on the surface of a thermally transparent body is reflected back. If the transmissivity of the body be 0.15, then the emissivity of surface is
A. 0.45
B. 0.55
C. 0.40
D. 0.75
Answer : A

7. The critical radius is the insulation radius at which the resistance to heat flow is
A. Maximum
B. Minimum
C. Zero
D. None of these
Answer : B

8. The heat transfer takes place according to
A. Zeroth law of thermodynamics
B. First law of thermodynamics
C. Second law of thermodynamics
D. Kirchhoff's law
Answer : C

9. According to Kirchoff's law, the ratio of emissive power to absorptivity for all bodies is equal to the emissive power of a
A. Grey body
B. Brilliant white polished body
C. Red hot body
D. Black body
Answer : D

10. The insulation ability of an insulator with the presence of moisture would
A. Increase
B. Decrease
C. Remain unaffected
D. May increase/decrease depending on temperature and thickness of insulation
Answer : B

11. A designer chooses the values of fluid flow rates and specific heats in such a manner that the heat capacities of the two fluids are equal. A hot fluid enters the counter flow heat exchanger at 100° C and leaves at 60° C. A cold fluid enters the heat exchanger at 40° C. The mean temperature difference between the two fluids is
A. 20°C
B. 40°C
C. 60°C
D. 66.7°C
Answer : A

12. Which of the following has least value of conductivity?
A. Glass
B. Water
C. Plastic
D. Air
Answer : D

13. Which of the following is a case of steady state heat transfer?
A. I.C. engine
B. Air preheaters
C. Heating of building in winter
D. None of the above
Answer : D

14. The value of the wavelength for maximum emissive power is given by
A. Wien's law
B. Planck's law
C. Stefan's law
D. Fourier's law
Answer : A

15. In case of liquids and gases, the heat transfer takes place according to
A. Conduction
B. Convection
C. Radiation
D. None of these
Answer : B

16. Free convection flow depends on
A. Density
B. Coefficient of viscosity
C. Gravitational force
D. All of these
Answer : D

17. Fourier's law of heat conduction is valid for
A. One dimensional cases only
B. Two dimensional cases only
C. Three dimensional cases only
D. Regular surfaces having non-uniform temperature gradients
Answer : A

18. The unit of Stefan-Boltzmann constant is
A. Watt/mK
B. Watt/m²K²
C. Watt/m²K⁴
D. Watt/mK²
Answer : C

19. Thermal conductivity of non-metallic amorphous solids with decrease in temperature
A. Increases
B. Decreases
C. Remain constant
D. May increase or decrease depending on temperature
Answer : B

20. Cork is a good insulator because it has
A. Free electrons
B. Atoms colliding frequency
C. Low density
D. Porous body
Answer : D

21. Depending on the radiating properties, a body will be opaque when
A. P = 0, x = 0 and a = 1
B. P=1, x = 0 and a = 0
C. P = 0, x = 1 and a = 0
D. X = 0, a + p = 1 Where a = absorptivity, p = reflectivity, X = transmissivity.
Answer : D

22. The amount of radiation mainly depends on
A. Nature of body
B. Temperature of body
C. Type of surface of body
D. All of the above
Answer : D

23. A steam pipe is to be lined with two layers of insulating materials of different thermal conductivities. For the minimum heat transfer,
A. The better insulation must be put inside
B. The better insulation must be put outside
C. One could place either insulation on either side
D. One should take into account the steam temperature before deciding as to which insulation is put where
Answer : A

24. Thermal diffusivity of a substance is given by (where h = Thermal diffusivity, ? = Density of substance, S = Specific heat, and k = Thermal conductivity)
A. h = k/ ?S
B. h = ?S/k
C. h = S/?k
D. h = k?/S
Answer : A

25. The thermal diffusivities for gases are generally
A. More than those for liquids
B. Less than those for liquids
C. More than those for solids
D. Dependent on the viscosity
Answer : A

26. According of Kirchhoff's law
A. Radiant heat is proportional to fourth power of absolute temperature
B. Emissive power depends on temperature
C. Emissive power and absorptivity are constant for all bodies
D. Ratio of emissive power to absorptive power for all bodies is same and is equal to the emissive power of a perfectly black body.
Answer : D

27. Thermal diffusivity is
A. A dimensionless parameter
B. Function of temperature
C. Used as mathematical model
D. A physical property of the material
Answer : D

28. Radiation is the process of heat transfer in which heat flows from a ________, in a straight line, without affecting the intervening medium.
A. Cold body to hot body
B. Hot body to cold body
C. Smaller body to larger body
D. Larger body to smaller body
Answer : B

29. Joule sec is the unit of
A. Universal gas constant
B. Kinematic viscosity
C. Thermal conductivity
D. Planck's constant
Answer : D

30. Reynolds number (RN) is given by (where h = Film coefficient, l = Linear dimension, V = Velocity of fluid, k = Thermal conductivity, t = Temperature, ? = Density of fluid, cp = Specific heat at constant pressure, and ? = Coefficient of absolute viscosity)
A. RN = hl/k
B. RN = ? cp/k
C. RN = ? V l /?
D. RN = V²/t.cp
Answer : C

31. Which of the following is the case of heat transfer by radiation?
A. Blast furnace
B. Heating of building
C. Cooling of parts in furnace
D. Heat received by a person from fireplace
Answer : D

32. An electric cable of aluminium conductor (k = 240 W/mK) is to be insulated with rubber (k = 0.15 W/mK). The cable is to be located in air (h = 6 W/m²). The critical thickness of insulation will be
A. 25 mm
B. 40 mm
C. 160 mm
D. 800 mm
Answer : A

33. The transfer of heat by molecular collision is known as
A. Conduction
B. Convection
C. Radiation
D. None of these
Answer : B

34. The expression Q = ? AT⁴ is called
A. Fourier equation
B. Stefan-Boltzmann equation
C. Newton Reichmann equation
D. Joseph-Stefan equation
Answer : B

35. Planck's law holds good for
A. Black bodies
B. Polished bodies
C. All coloured bodies
D. All of the above
Answer : A

36. Thermal conductivity of a material may be defined as the
A. Quantity of heat flowing in one second through one cm cube of material when opposite faces ^re maintained at a temperature difference of 1°C
B. Quantity of heat flowing in one second through a slab of the material of area one cm square, thickness 1 cm when its faces differ in temperature by 1°C
C. Heat conducted in unit time across unit area through unit thickness when a temperature difference of unity is maintained between opposite faces
D. All of the above
Answer : D

37. Moisture would find its way into insulation by vapour pressure unless it is prevented by
A. High thickness of insulation
B. High vapour pressure
C. Less thermal conductivity insulator
D. A vapour seal
Answer : D

38. The use of heat exchangers is made in
A. Radiators in automobile
B. Condensers and boilers in steam plants
C. Condensers and evaporators in refrigeration and air conditioning units
D. All of the above
Answer : D

39. The total emissivity power is .defined as the total amount of radiation emitted by a black body per unit
A. Temperature
B. Thickness
C. Area
D. Time
Answer : D

40. Wiens law states that the wave length corresponding to ________ is proportional to the absolute temperature.
A. Minimum energy
B. Maximum energy
C. Both (A) and (B)
D. None of these
Answer : B

41. In counter flow heat exchangers
A. Both the fluids at inlet (of heat exchanger where hot fluid enters) are in their coldest state
B. Both the fluids at inlet are in their hottest state
C. Both the fluids at exit are in their hottest state
D. One fluid is in hottest state and other in coldest state at inlet
Answer : B

42. The value of Prandtl number for air is about
A. 0.1
B. 0.3
C. 0.7
D. 1.7 Answer : C

43. A composite slab has two layers of different materials with thermal conductivities k? and k?. If each layer has the same thickness, then the equivalent thermal conductivity of the slab will be
A. k? k?
B. (k? + k?)
C. (k? + k?)/ k? k?
D. 2 k? k?/ (k? + k?)
Answer : D

44. Conduction is a process of heat transfer
A. From one particle of the body to another without the actual motion of the particles
B. From one particle of the body to another by the actual motion of the heated particles
C. From a hot body to a cold body, in a straight line, without affecting the intervening medium
D. None of the above
Answer : A

45. Unit of thermal conductivity in S.I. units is
A. J/m² sec
B. J/m °K sec
C. W/m °K
D. Option (B) and (C) above
Answer : D

46. In counter current flow heat exchanger, the logarithmic temperature difference between the fluids is ________ as compared to parallel flow heat exchanger.
A. Same
B. Less
C. Greater
D. None of these
Answer : C

47. Which of the following property of air does not increase with rise in temperature?
A. Thermal conductivity
B. Thermal diffusivity
C. Density
D. Dynamic viscosity
Answer : C

48. An ordinary passenger aircraft requires a cooling system of capacity.
A. 2 TR
B. 4 TR
C. 8 TR
D. 10 TR
Answer : C

49. The transfer of heat by molecular collision is smallest in
A. Solids
B. Liquids
C. Gases
D. None of these
Answer : C

50. The process of heat transfer from one particle of the body to another is called conduction, when the particles of the body
A. Move actually
B. Do not move actually
C. Affect the intervening medium
D. Does not affect the intervening medium
Answer : B