Chemical Engineering Plant Economics MCQ Solved Paper for NDA

1. Cost of piping in a fluid processing unit (e.g., distillation) of a chemical process plant is about __________ percent of the fixed capital investment.
A. 4
B. 13
C. 22
D. 34
Answer : B

2. The amount of simple interest during 'n' interest period is (where, i = interest rate based on the length of one interest period, p = principal)
A. p.i.n.
B. p(1 + i.n)
C. p(1 + i)n
D. p(1 - i.n)
Answer : A

3. Break-even point is the point of intersection of
A. Fixed cost and total cost
B. Total cost and sales revenue
C. Fixed cost and sales revenue
D. None of these
Answer : B

4. A balance sheet for an industrial concern shows
A. The financial condition at any given time
B. Only current assets
C. Only fixed assets
D. Only current and fixed assets
Answer : A

5. Which of the following methods of depreciation calculations results in book values greater than those obtained with straight line method?
A. Multiple straight line method
B. Sinking fund method
C. Declining balance method
D. Sum of the years digit method
Answer : B

6. Total product cost of a chemical plant does not include the __________ cost.
A. Market survey
B. Operating labour, supervision and supplies
C. Overhead and utilities
D. Depreciation, property tax and insurance
Answer : A

7. Nominal and effective interest rates are equal, when the interest is compounded
A. Quarterly
B. Semi-annually
C. Annually
D. In no case, they are equal
Answer : C

8. 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost.
A. 1 to 5
B. 10 to 20
C. 25 to 35
D. 35 to 45
Answer : B

9. Generally, income taxes are based on the
A. Total income
B. Gross earning
C. Total product cost
D. Fixed cost
Answer : B

10. According to six-tenths-factor rule, if the cost of a given unit at one capacity is known, then the cost of similar unit with '' times the capacity of the first unit is approximately equal to __________ times the cost of the initial unit.
A. n
B. n0.6
C. n0.4
D. ?n
Answer : B

11. Which of the following does not come under the sales expenses for a product of a chemical plant?
A. Advertising
B. Warehousing
C. Legal fees
D. Customer service
Answer : C

12. Following the six-tenth factor rule, if a loglog plot of capacity of the equipment vs. cost of the equipment is made, then a straight line is obtained, whose slope is equal to
A. 0.1
B. 0.6
C. 0.2
D. 0.8
Answer : B

13. Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment.
A. 10 to 20
B. 20 to 40
C. 45 to 60
D. 65 to 75
Answer : B

14. The ratio of working capital to total capital investment for most chemical plants (except for nonseasonal based products) is in the range of __________ percent.
A. 0.1 to 1
B. 1 to 2
C. 10 to 20
D. 50 to 60
Answer : C

15. Optimum economic pipe diameter for fluid is determined by the
A. Viscosity of the fluid
B. Density of the fluid
C. Total cost considerations (pumping cost plus fixed cost of the pipe)
D. None of these
Answer : C

16. A series of equal payments (e.g., deposit or cost) made at equal intervals of time is known as
A. Perpetuity
B. Capital charge factor
C. Annuity
D. Future worth
Answer : C

17. __________ of depreciation calculation does not take into account the interest on investments.
A. Present worth method
B. Sinking fund method
C. Sum of the years-digits method
D. All (A), (B) and (C)
Answer : C

18. The depreciation during the year 'n', in diminishing balance method of depreciation calculation, is calculated by multiplying a fixed percentage 'N' to the
A. Initial cost
B. Book value at the end of (n - 1)th year
C. Depreciation during the (n - 1)th year
D. Difference between initial cost and salvage value
Answer : B

19. Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost.
A. 10 to 20
B. 35 to 45
C. 55 to 65
D. 70 to 80
Answer : B

20. Which of the following is not a component of depreciation cost?
A. Repairs and maintenance cost
B. Loss due to obsolescence of the equipment
C. Loss due to decrease in the demand of product
D. Loss due to accident/breakdown in the machinery
Answer : A

21. A present sum of Rs. 100 at the end of one year, with half yearly rate of interest at 10%, will be Rs.
A. 121
B. 110
C. 97
D. 91
Answer : A

22. Which of the following is the cheapest material of construction for the storage of sodium hydroxide upto a concentration of 75%?
A. Stainless steel
B. Plain carbon steel
C. Nickel
D. Copper
Answer : B

23. Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it?
A. Electrical installation cost
B. Equipment installation cost
C. Cost for piping
D. Equipment insulation cost
Answer : D

24. In financial accounting of a chemical plant, which of the following relationship is invalid?
A. Assets = equities
B. Assets = liabilities + net worth
C. Total income = costs + profits
D. Assets = capital
Answer : D

25. In a manufacturing industry, breakeven point occurs, when the
A. Total annual rate of production equals the assigned value
B. Total annual product cost equals the total annual sales
C. Annual profit equals the expected value
D. Annual sales equals the fixed cost
Answer : B

26. Utilities cost in the operation of chemical process plant comes under the
A. Plant overhead cost
B. Fixed charges
C. Direct production cost
D. General expenses
Answer : C

27. Manufacturing cost in a chemical company does not include the
A. Fixed charges
B. Plant overheads
C. Direct products cost
D. Administrative expenses
Answer : D

28. Pick out the correct statement.
A. Difference between income and expense is termed as gross revenue
B. Unamortised cost is the difference between the original cost of a property and all the depreciation charges made to date
C. Sum-of-the-years-digits methods of depreciation calculation accounts for the interest on the investment
D. Scrap value is the net amount of money obtainable from the sale of used property over and above any charges involved in its removal & sale
Answer : B

29. The value of a property decreases __________ with time in straight line method of determining depreciation.
A. Linearly
B. Non-linearly
C. Exponentially
D. Logarithmically
Answer : A

30. Which of the following elements is not included in the scope of market analysis?
A. Competition from other manufactures
B. Product distribution
C. Opportunities
D. Economics
Answer : D

31. Out of the following, the depreciation calculated by the __________ method is the maximum.
A. Diminishing balance
B. Straight line
C. Sum of the years digit
D. Sinking fund
Answer : A

32. Pick out the wrong statement.
A. Net worth means paid up share capital and reserve & surplus (i.e. shareholders equity)
B. Return on equity = profit after tax/net worth
C. Working capital turnover ratio = sales/net working capital
D. Total cost of production is more than net sales realisation (NSR) at breakeven point
Answer : D

33. Accumulated sum at the end of 5 years, if Rs. 10000 is invested now at 10% interest per annum on a compound basis is Rs.
A. 15000
B. 16105
C. 18105
D. 12500
Answer : B

34. __________ method for profitability evaluation of a project does not account for investment cost due to land.
A. Net present worth
B. Pay out period
C. Discounted cash flow
D. Rate of return on investment
Answer : B

35. A reactor having a salvage value of Rs. 10000 is estimated to have a service life of 10 years. The annual interest rate is 10%. The original cost of the reactor was Rs. 80000. The book value of the reactor after 5 years using sinking fund depreciation method will be Rs.
A. 40,096
B. 43,196
C. 53,196
D. 60,196
Answer : D

36. In which of the electric power generation system, the operating cost is minimum?
A. Thermal
B. Nuclear
C. Hydroelectric
D. Fast breeder reactor
Answer : C

37. Scheduling provides information about the
A. Proper utilisation of machines
B. Means to minimise idle time for machines
C. Time of completion of job
D. Time of starting of job and also about how much work should be completed during a particular period
Answer : D

38. In declining balance method of depreciation calculation, the
A. Value of the asset decreases linearly with time
B. Annual cost of depreciation is same every year
C. Annual depreciation is the fixed percentage of the property value at the beginning of the particular year
D. None of these
Answer : C

39. An investment of Rs. 100 lakhs is to be made for construction of a plant, which will take two years to start production. The annual profit from the operation of the plant is Rs. 20 lakhs. What will be the payback time?
A. 5 years
B. 7 years
C. 12 years
D. 10 years
Answer : B

40. Depreciation is __________ in profit with time.
A. Decrease
B. Increase
C. No change
D. None of these
Answer : A

41. Which of the following is a component of working capital investment?
A. Utilities plants
B. Maintenance and repair inventory
C. Process equipments
D. Depreciation
Answer : B

42. 'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from
A. 1.2 to 1.4
B. 2.5 to 2.7
C. 4.2 to 4.4
D. 6.2 to 6.4
Answer : C

43. Which of the following is the costliest material of construction used in pressure vessel construction?
A. Low alloy steel
B. Lead
C. Titanium
D. High alloy steel
Answer : C

44. Gantt chart (or Bar chart) is helpful in
A. Efficient utilisation of manpower and machines
B. Preparing production schedule
C. Efficient despatching of products
D. Inventory control
Answer : B

45. Personnel working in the market research group is responsible for the job of
A. Equipment selection
B. Product evaluation
C. Equipment design
D. Cost estimation
Answer : B

46. With increase in the discounted cash flow rate of return, the ratio of the total present value to the initial investment of a given project
A. Decreases
B. Increases
C. Increases linearly
D. Remain constant
Answer : A

47. For a given fluid, as the pipe diameter increases, the pumping cost
A. Decreases
B. Increases
C. Remains the same
D. May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian
Answer : A

48. The __________ of a chemical company can be obtained directly from the balance sheet as the difference between current assets and current liabilities.
A. Cash ratio
B. Net working capital
C. Current ratio
D. Liquids assets
Answer : B

49. The inventory of raw materials included in the working capital is usually about __________ months supply of raw materials valued at delivery prices.
A. One
B. Three
C. Six
D. Twelve
Answer : A

50. Most chemical plants use an initial working capital amounting to 10-20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant.
A. 30
B. 50
C. 75
D. 95
Answer : B