Heat & Mass Transfer MCQ Solved Paper for IBPS Clerk

1. Thermal conductivity of solid metals with rise in temperature normally
A. Increases
B. Decreases
C. Remain constant
D. May increase or decrease depending on temperature
Answer : B

2. Joule sec is the unit of
A. Universal gas constant
B. Kinematic viscosity
C. Thermal conductivity
D. Planck's constant
Answer : D

3. The unit of Stefan Boltzmann constant is
A. Watt/cm² °K
B. Watt/cm4 °K
C. Watt²/cm °K?
D. Watt/cm² °K?
Answer : D

4. Thermal conductivity of air at room temperature in kcal/m hr °C is of the order of
A. 0.002
B. 0.02
C. 0.01
D. 0.1
Answer : B

5. In counter current flow heat exchanger, the logarithmic temperature difference between the fluids is ________ as compared to parallel flow heat exchanger.
A. Same
B. Less
C. Greater
D. None of these
Answer : C

6. In counter flow heat exchangers
A. Both the fluids at inlet (of heat exchanger where hot fluid enters) are in their coldest state
B. Both the fluids at inlet are in their hottest state
C. Both the fluids at exit are in their hottest state
D. One fluid is in hottest state and other in coldest state at inlet
Answer : B

7. The critical radius is the insulation radius at which the resistance to heat flow is
A. Maximum
B. Minimum
C. Zero
D. None of these
Answer : B

8. The value of the wavelength for maximum emissive power is given by
A. Wien's law
B. Planck's law
C. Stefan's law
D. Fourier's law
Answer : A

9. The ratio of the emissive power and absorptive power of all bodies is the same and is equal to the emissive power of a perfectly black body. This statement is known as
A. Wien's law
B. Stefan's law
C. Kirchhoff's law
D. Planck's law
Answer : C

10. Two plates spaced 150 mm apart are maintained at 1000°C and 70°C. The heat transfer will take place mainly by
A. Convection
B. Radiation
C. Forced convection
D. Free convection
Answer : B

11. The radiation emitted by a black body is known as
A. Black radiation
B. Full radiation
C. Total radiation
D. All of these
Answer : D

12. Sensible heat factor is given by (where S.H. = Sensible heat, and L.H. = Latent heat)
A. S.H/(S.H + L.H)
B. (S.H + L.H) /S.H
C. (L.H - S.H)/S.H
D. S.H/(L.H - S.H)
Answer : A

13. According to Stefan Boltzmann law, the total radiation from a black body per second per unit area is directly proportional to the
A. Absolute temperature
B. Square of the absolute temperature
C. Cube of the absolute temperature
D. Fourth power of the absolute temperature
Answer : D

14. When heat is transferred by molecular collision, it is referred to as heat transfer by
A. Conduction
B. Convection
C. Radiation
D. Scattering
Answer : B

15. Unit of thermal diffusivity is
A. m²/hr
B. m²/hr °C
C. kcal/m² hr
D. kcal/m. hr °C
Answer : A

16. Heat conducted through per unit area and unit thick face per unit time when temperature difference between opposite faces is unity, is called
A. Thermal resistance
B. Thermal coefficient
C. Temperature gradient
D. Thermal conductivity
Answer : D

17. Fourier's law of heat conduction is valid for
A. One dimensional cases only
B. Two dimensional cases only
C. Three dimensional cases only
D. Regular surfaces having non-uniform temperature gradients
Answer : A

18. Log mean temperature difference in case of counter flow compared to parallel flow will be
A. Same
B. More
C. Less
D. Depends on other factors
Answer : B

19. The heat transfer by conduction through a thick cylinder (Q) is given by (where T? = Higher temperature, T? = Lower temperature, r? = Inside radius, r? = Outside radius, l = Length of cylinder, and k = Thermal conductivity)
A. Q = [2?lk (T? - T?)]/2.3 log (r?/r?)
B. Q = 2.3 log (r?/r?)/[2?lk (T? - T?)]
C. Q = [2? (T? - T?)]/2.3 lk log (r?/r?)
D. Q = = 2?lk/2.3 (T? - T?) log (r?/r?)
Answer : A

20. Metals are good conductors of heat because
A. Their atoms collide frequently
B. Their atoms are relatively far apart
C. They contain free electrons
D. They have high density
Answer : A

21. The amount of radiation mainly depends upon the
A. Nature of the body
B. Temperature of the body
C. Type of surface of the body
D. All of these
Answer : D

22. Wiens law states that the wave length corrsponding to ________ is proportional to the absolute temperature.
A. Minimum energy
B. Maximum energy
C. Both (A) and (B)
D. None of these
Answer : B

23. If the energy radiated per second per sq. cm. of the surface for wave lengths lying between ?, and ? + d? is represented by (e?.d?), then e? is called
A. Absorptive power
B. Emissive power
C. Emissivity
D. None of these
Answer : B

24. The unit of overall coefficient of heat transfer is
A. W/m²K
B. W/m²
C. W/mK
D. W/m
Answer : A

25. The ratio of the thickness of thermal boundary layer to the thickness of hydrodynamic boundary layer is equal to (Prandtl number) n, where n is equal to
A. -1/3
B. -2/3
C. 1
D. -1
Answer : A

26. Thermal diffusivity of a substance is given by (where h = Thermal diffusivity, ? = Density of substance, S = Specific heat, and k = Thermal conductivity)
A. h = k/ ?S
B. h = ?S/k
C. h = S/?k
D. h = k?/S
Answer : A

27. Thermal diffusivity of a substance is
A. Directly proportional to thermal conductivity
B. Inversely proportional to density of substance
C. Inversely proportional to specific heat
D. All of the above
Answer : D

28. According of Kirchhoff's law
A. Radiant heat is proportional to fourth power of absolute temperature
B. Emissive power depends on temperature
C. Emissive power and absorptivity are constant for all bodies
D. Ratio of emissive power to absorptive power for all bodies is same and is equal to the emissive power of a perfectly black body.
Answer : D

29. Thermal conductivity of a material may be defined as the
A. Quantity of heat flowing in one second through one cm cube of material when opposite faces ^re maintained at a temperature difference of 1°C
B. Quantity of heat flowing in one second through a slab of the material of area one cm square, thickness 1 cm when its faces differ in temperature by 1°C
C. Heat conducted in unit time across unit area through unit thickness when a temperature difference of unity is maintained between opposite faces
D. All of the above
Answer : D

30. The insulation ability of an insulator with the presence of moisture would
A. Increase
B. Decrease
C. Remain unaffected
D. May increase/decrease depending on temperature and thickness of insulation
Answer : B

31. A heat exchanger with heat transfer surface area A and overall heat transfer coefficient U handles two fluids of heat capacities Cmax and Cmin. The number of transfer units (NTU) used in the analysis of heat exchanger is specified as
A. A.C_min/U
B. U/A.C_min
C. A.U.C_min
D. A.U/C_min
Answer : D

32. The process of heat transfer from one particle of the fluid to another by the actual movement of the fluid particles caused by some mechanical means, is known as
A. Conduction
B. Free convection
C. Forced convection
D. Radiation
Answer : C

33. Depending on the radiating properties, a body will be black when
A. P = 0, x = 0 and a = 1
B. P= 1, T = 0 and a = 0
C. P = 0, x = 1 and a = 0
D. X = 0, a + p = 0 Where a = absorptivity, p = reflectivity, X = transmissivity.
Answer : A

34. The heat transfer takes place according to
A. Zeroth law of thermodynamics
B. First law of thermodynamics
C. Second law of thermodynamics
D. Kirchhoff's law
Answer : C

35. Cork is a good insulator because it has
A. Free electrons
B. Atoms colliding frequency
C. Low density
D. Porous body
Answer : D

36. According to Stefan's law, the total radiation from a black body per second per unit area is proportional to
A. Absolute temperature
B. T²
C. T?
D. T
Answer : D

37. Reynolds number is the ratio of
A. Energy transferred by convection to that by conduction
B. Kinematic viscosity to thermal diffusivity
C. Inertia force to viscous force
D. None of the above
Answer : C

38. In free convection heat transfer, Nusselt number is function of
A. Grashoff number and Reynold number
B. Grashoff number and Prandtl number
C. Prandtl number and Reynold number
D. Grashoff number, Prandtl number and Reynold number
Answer : B

39. Which of the following is the case of heat transfer by radiation?
A. Blast furnace
B. Heating of building
C. Cooling of parts in furnace
D. Heat received by a person from fireplace
Answer : D

40. Upto the critical radius of insulation,
A. Added insulation will increase heat loss
B. Added insulation will decrease heat loss
C. Convective heat loss will be less than conductive heat loss
D. Heat flux will decrease
Answer : A

41. Unit of thermal conductivity in M.K.S. units is
A. K cal/kg m² °C
B. K cal m/hr m² °C
C. K cal/hr m² °C
D. K calm/hr °C
Answer : B

42. The thickness of thermal and hydrodynamic boundary layer is equal if Prandtl number is
A. Equal to one
B. Greater than one
C. Less than one
D. Equal to Nusselt number
Answer : A

43. The emissive power of a body depends upon its
A. Temperature
B. Wave length
C. Physical nature
D. All of the above
Answer : D

44. Fourier's law of heat conduction gives the heat flow for
A. Irregular surfaces
B. Nonuniform temperature surfaces
C. One dimensional cases only
D. Two dimensional cases only
Answer : C

45. Radiation is the process of heat transfer in which heat flows from a ________, in a straight line, without affecting the intervening medium.
A. Cold body to hot body
B. Hot body to cold body
C. Smaller body to larger body
D. Larger body to smaller body
Answer : B

46. Heat transfer takes place as per
A. Zeroth law of thermodynamics
B. First law of thermodynamic
C. Second law of the thermodynamics
D. Kirchoff's law
Answer : C

47. The product of Reynolds number and Prandtl number is known as
A. Stanton number
B. Biot number
C. Peclet number
D. Grashoff number
Answer : C

48. In heat transfer, conductance equals conductivity (kcal/hr/sq.m/ °C/cm) divided by
A. Hr (time)
B. Sq. m (area)
C. °C (temperature)
D. K.cal (heat)
Answer : D

49. The amount of radiation mainly depends on
A. Nature of body
B. Temperature of body
C. Type of surface of body
D. All of the above
Answer : D

50. When heat is transferred from hot body to cold body, in a straight line, without affecting the intervening medium, it is referred as heat transfer by
A. Conduction
B. Convection
C. Radiation
D. Conduction and convection
Answer : C