IBPS RRB - Chemical Engineering Plant Economics 1000+ MCQ [Solved] PDF Download

1. Profit is equal to revenue minus
A. Book value
B. Total cost
C. Operating cost
D. None of these
Answer : B

2. Depreciation
A. Costs (on annual basis) are constant when the straight line method is used for its determination
B. Is the unavoidable loss in the value of the plant, equipment and materials with lapse in time
C. Does figure in the calculation of income tax liability on cash flows from an investment
D. All (A), (B) and (C)
Answer : D

3. An investment of Rs. 100 lakhs is to be made for construction of a plant, which will take two years to start production. The annual profit from the operation of the plant is Rs. 20 lakhs. What will be the payback time?
A. 5 years
B. 7 years
C. 12 years
D. 10 years
Answer : B

4. 'Six-tenth factor' rule is used for estimating the
A. Equipment installation cost
B. Equipment cost by scaling
C. Cost of piping
D. Utilities cost
Answer : B

5. Factory manufacturing cost is the sum of the direct production cost
A. Fixed charges and plant overhead cost
B. And plant overhead cost
C. Plant overhead cost and administrative expenses
D. None of these
Answer : A

6. Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost.
A. 10 to 20
B. 35 to 45
C. 55 to 65
D. 70 to 80
Answer : B

7. Most chemical plants use an initial working capital amounting to 10-20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant.
A. 30
B. 50
C. 75
D. 95
Answer : B

8. In financial accounting of a chemical plant, which of the following relationship is invalid?
A. Assets = equities
B. Assets = liabilities + net worth
C. Total income = costs + profits
D. Assets = capital
Answer : D

9. The total investment in a project is Rs. 10 lakhs and the annual profit is 1.5 lakhs. If the project life is 10 years, then the simple rate of return on investment is
A. 15%
B. 10%
C. 1.5%
D. 150%
Answer : C

10. 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost.
A. 1 to 5
B. 10 to 20
C. 25 to 35
D. 35 to 45
Answer : B

11. Pick out the wrong statement.
A. Gross revenue is that total amount of capital received as a result of the sale of goods or service
B. Net revenue is the total profit remaining after deducting all costs excluding taxes
C. The ratio of immediately available cash to the total current liabilities is known as the cash ratio
D. Consolidated income statement based on a given time period indicates surplus capital and shows the relationship among total income, costs & profit over the time interval
Answer : B

12. In an ordinary chemical plant, electrical installation cost may be about
A. 10-15% of purchased equipment cost
B. 3-10% of fixed capital investment
C. Either (A) or (B)
D. Neither (A) nor (B)
Answer : C

13. For a typical project, the cumulative cash flow is zero at the
A. End of the project life
B. Breakeven point
C. Start up
D. End of the design stage
Answer : B

14. The economic life of a large chemical process plant as compared to a small chemical plant is
A. Only slightly more
B. Much more
C. Slightly less
D. Almost equal
Answer : B

15. In a chemical process plant, the total product cost comprises of manufacturing cost and the
A. General expenses
B. Overhead cost
C. R & D cost
D. None of these
Answer : A

16. Effluent treatment cost in a chemical plant is categorised as the __________ cost.
A. Fixed
B. Overhead
C. Utilities
D. Capital
Answer : C

17. A series of equal payments (e.g., deposit or cost) made at equal intervals of time is known as
A. Perpetuity
B. Capital charge factor
C. Annuity
D. Future worth
Answer : C

18. If the interest rate of 10% per period is compounded half yearly, the actual annual return on the principal will be __________ percent.
A. 10
B. 20
C. > 20
D. < 20
Answer : C

19. In declining balance method of depreciation calculation, the
A. Value of the asset decreases linearly with time
B. Annual cost of depreciation is same every year
C. Annual depreciation is the fixed percentage of the property value at the beginning of the particular year
D. None of these
Answer : C

20. If an amount R is paid at the end of every year for 'n' years, then the net present value of the annuity at an interest rate of i is
A. R [{(1 + i)ⁿ - 1}/ i ]
B. R [{(1 + i)ⁿ - 1}/ i (1 + i)ⁿ]
C. R(1 + i)ⁿ
D. R/(1 + i)ⁿ
Answer : B

21. According to six-tenths-factor rule, if the cost of a given unit at one capacity is known, then the cost of similar unit with '' times the capacity of the first unit is approximately equal to __________ times the cost of the initial unit.
A. n
B. n0.6
C. n0.4
D. ?n
Answer : B

22. A present sum of Rs. 100 at the end of one year, with half yearly rate of interest at 10%, will be Rs.
A. 121
B. 110
C. 97
D. 91
Answer : A

23. The amount of simple interest during 'n' interest period is (where, i = interest rate based on the length of one interest period, p = principal)
A. p.i.n.
B. p(1 + i.n)
C. p(1 + i)n
D. p(1 - i.n)
Answer : A

24. Relative cost of chemical process plants in India is about __________ percent more than the similar plants in U.S.A.
A. 15
B. 35
C. 55
D. 75
Answer : B

25. Nominal and effective interest rates are equal, when the interest is compounded
A. Quarterly
B. Semi-annually
C. Annually
D. In no case, they are equal
Answer : C

26. __________ method for profitability evaluation of a project does not account for investment cost due to land.
A. Net present worth
B. Pay out period
C. Discounted cash flow
D. Rate of return on investment
Answer : B

27. With increase in the discounted cash flow rate of return, the ratio of the total present value to the initial investment of a given project
A. Decreases
B. Increases
C. Increases linearly
D. Remain constant
Answer : A

28. Functional depreciation of an equipment is the measure of decrease in its value due to its
A. Ageing
B. Wear and tear
C. Obsolescence
D. Breakdown or accident
Answer : C

29. Manufacturing cost in a chemical company does not include the
A. Fixed charges
B. Plant overheads
C. Direct products cost
D. Administrative expenses
Answer : D

30. Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it?
A. Electrical installation cost
B. Equipment installation cost
C. Cost for piping
D. Equipment insulation cost
Answer : D

31. Which of the following is the costliest material of construction used in pressure vessel construction?
A. Low alloy steel
B. Lead
C. Titanium
D. High alloy steel
Answer : C

32. Which of the following is not a component of the fixed capital for a chemical plant facility?
A. Raw materials inventory
B. Utilities plants
C. Process equipment
D. Emergency facilities
Answer : A

33. An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from the time of initial payment to the end of annuity term. Ordinary annuity is used in the calculation of the
A. Manufacturing cost
B. Depreciation by sinking fund method
C. Discrete compound interest
D. Cash ratio
Answer : B

34. Payback period
A. And economic life of a project are the same
B. Is the length of time over which the earnings on a project equals the investment
C. Is affected by the variation in earnings after the recovery of the investment
D. All (A), (B) and (C)
Answer : B

35. Cost of piping in a fluid processing unit (e.g., distillation) of a chemical process plant is about __________ percent of the fixed capital investment.
A. 4
B. 13
C. 22
D. 34
Answer : B

36. Pick out the wrong statement.
A. Gross margin = net income - net expenditure
B. Net sales realisation (NSR) = Gross sales - selling expenses
C. At breakeven point, NSR is more than the total production cost
D. Net profit = Gross margin - depreciation - interest
Answer : C

37. Generally, income taxes are based on the
A. Total income
B. Gross earning
C. Total product cost
D. Fixed cost
Answer : B

38. Break-even point is the point of intersection of
A. Fixed cost and total cost
B. Total cost and sales revenue
C. Fixed cost and sales revenue
D. None of these
Answer : B

39. An investment of Rs. 1000 is carrying an interest of 10% compounded quarterly. The value of the investment at the end of five years will be
A. 1000 (1 + 0.1/4)²⁰
B. 1000 (1 + 0.1)²⁰
C. 1000 (1 + 0.1/4)⁵
D. 1000 (1 + 0.1/2)⁵
Answer : A

40. For a given fluid, as the pipe diameter increases, the pumping cost
A. Decreases
B. Increases
C. Remains the same
D. May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian
Answer : A

41. Accumulated sum at the end of 5 years, if Rs. 10000 is invested now at 10% interest per annum on a compound basis is Rs.
A. 15000
B. 16105
C. 18105
D. 12500
Answer : B

42. Pick out the wrong statement.
A. Net worth means paid up share capital and reserve & surplus (i.e. shareholders equity)
B. Return on equity = profit after tax/net worth
C. Working capital turnover ratio = sales/net working capital
D. Total cost of production is more than net sales realisation (NSR) at breakeven point
Answer : D

43. Pick out the wrong statement.
A. Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes
B. A cost index is merely a number for a given year showing the cost at that time relative to a certain base year
C. Turnover ratio of a chemical plant is the ratio of gross annual sales to the fixed capital investment
D. Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary
Answer : D

44. Gantt chart (or Bar chart) is helpful in
A. Efficient utilisation of manpower and machines
B. Preparing production schedule
C. Efficient despatching of products
D. Inventory control
Answer : B

45. Which of the following is the costliest source of getting hydrogen on commercial scale for the manufacture of nitrogenous fertiliser?
A. Coal gasification
B. Steam reforming of naphtha
C. Electrolysis of water
D. Coke oven gas
Answer : C

46. Which of the following is a component of working capital investment?
A. Utilities plants
B. Maintenance and repair inventory
C. Process equipments
D. Depreciation
Answer : B

47. A balance sheet for a chemical plant shows its financial condition at any given date. It does not contain the __________ of the plant.
A. Current asset
B. Current liability
C. Long term debt
D. Profit
Answer : D

48. Depreciation is __________ in profit with time.
A. Decrease
B. Increase
C. No change
D. None of these
Answer : A

49. Which of the following is not a mathematical method for evaluation of profitability of a chemical process plant?
A. Cash reserve
B. Rate of return on investment
C. Payout period
D. Discounted cash flow based on full life performance
Answer : A

50. Effective and nominal interest rates are equal, when the interest is compounded
A. Annually
B. Fortnightly
C. Monthly
D. Half-yearly
Answer : A