A full scale technical drawing will have a scale factor of ________.
1 : 1
1 : 2
2 : 1
1 : 4
Correct Answer :
A. 1 : 1
Related Questions
The text height for room names should be set to ________for a drawing that will be plotted to a scale of ¼ = 1'-0.
4
5
6
8
This is the total amount that the feature on the actual part is allowed to vary from what is specified by the dimension:
Allowance
Tolerance
Specification
Difference
A circular arc is dimensioned in the view where you see its true shape by giving the value for its:
Diameter
Arc length
Radius
Chord length
Referring to the fractional inches to decimal inches to millimetre conversion chart on page 55 what is the equivalent mm measurement of 3/16 inch.
1.906
4.7625
5.958
14.6844
The ________ is a standard element of a section view in a technical drawing.
Cutting Plane line
Section lines
Material hatch pattern
All of the above
Placement of dimensions on a drawing is controlled by ________.
ANSI
The design engineer
Corporate drafting standards
All of the above
The second line of dimensions out from the plan generally includes ________.
Centers of doors and windows
The distances between outside walls and interior walls
The measurement from the outside of the brick to the inside of the exterior wall
The measurement from one outside corner to the opposite outside corner
In some circumstances an entire drawing can be inserted into a different drawing as a block. When this is used the base point will default to ________.
0, 0
10, 10
20, 20
30, 30
The Free Orbit tool is found on the ________ toolbar.
Rotate
Move
Modify
3-D Move
The condition of a part when it contains the least amount of material is referred to as ________.
Smallest
LMC
MMC
Actual size
These drawings are given to contractors to perform work or manufacture individual parts:
Assembly details
3D drawings
Working drawings
Skeleton assemblies
Before starting an isometric drawing in Auto-CAD the drafter needs to ________.
Set the grid to isometric
Set the current layer to Defpoints
Turn Object Snap off
Turn Ortho off
In developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right side views.
Object
Hidden
Dimension
Miter
By using a ________ section of a cylindrical mechanical part the drafter should be able to show only one view of the part.
Half
Whole
Revolved
Broken out
CAD programs which incorporate parametric modeling utilize a system in which the dimensions control the ________.
Size and shape of the model features
Perspective of the model
Shading used to render the model
All of the above
These maps are used to plan construction projects that locate construction features so they fit the topography of the area:
Subdivision plats
Landscape maps
Structural topography maps
Structure location plans
A ________ is the person responsible for verifying that the drawings in a project set are free of mistakes.
Client
CAD trainee
Receptionist
Checker
The default position of the UCS icon is positioned at ________ on the AutoCAD grid.
0, 0, 0
10, 10, 10
20, 20, 20
None of the above
When only a small section of an interior area needs to be revealed the drafter can use a ________ section.
Half
Quarter
Full
Broken out
Approximately this much of the cost of product development and manufacture is determined at the design stage:
40-50 %
60-75 %
70-80 %
75-85 %
When the drafter types the word BLOCK or selects the Make Block tool from the Draw tool bar the ________ will appear.
Grid
Block Text Box
Block Definition Dialog
None of the above
Some common blocks used by architectural drafters include ________.
Door swings
Ceiling fans
Appliances
All of the above
This is the plane upon which the top view is projected:
Horizontal
Frontal
Profile
Base
When designing a home for a client, one of the most important predesign considerations that an architect needs to address is ________.
How much money the client is willing to spend
The site on which the house is to sit
The nearest grocery store
Whether or not there is a curb and gutter system
Center lines are used to locate or represent the centers of ________.
Arcs
Circles
Hidden round features
All of the above
The maximum and minimum sizes of a feature are identified by a ________ tolerance.
Limits
GD&T
Reference
Allowance
Once the architect has finalized the house plans with the client any changes to the design requested by the client will require a ________.
Change order
Modification slip
Whole new set of drawings
None of the above
A projection weld is a type of:
Resistance weld
Arc weld
Gas weld
Fillet weld
The most common geometric form used in gears today is this:
Involute profile
Convolute profile
Base circle
Spur circle
In order to create an accurate assembly drawing the drafter should create the ________ drawings first.
Detail
Title block
Parts list
Isometric