A ________ is the person responsible for verifying that the drawings in a project set are free of mistakes.

A. Client

B. CAD trainee

C. Receptionist

D. Checker

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. A half-moon protractor is divided into how many degrees?
  2. This is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic…
  3. These gears transmit power between shafts whose axes intersect at any angle:
  4. The architectural drafter usually begins a set of working drawings by creating the ________ plan first.
  5. When filling an area with a hatch pattern in Auto-CAD the drafter needs to be able to ________.
  6. Perspective drawings are classified according to their number of these features:
  7. The organized and orderly approach to solving problems is known as the:
  8. When designing a home for a client, one of the most important predesign considerations that an architect…
  9. This is the smallest diameter of a screw thread:
  10. 4.The principle reason for using an auxiliary view is ________.
  11. The Auto-CAD command used to combine two or more primitive shapes into a single complex 3-dimensional…
  12. These units are based on inch-foot and yard measurements:
  13. In this type of dimensioning, allowance must be made for bends:
  14. Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point…
  15. In oblique projection, important shapes should be in this position relative to the viewing plane:
  16. In architectural drawing ________ are often used to illustrate and detail structural components.
  17. When using the descriptive geometry method to create an auxiliary view the drafter should __________.
  18. A line drawn with a long section, short dash, and another long section is a ________.
  19. A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.
  20. In this type of view, the cutting plane line indicates both the location of the cutting plane and the…
  21. In order to create an isometric circle to represent a hole through the top surface of a box, the drafter…
  22. This is how axonometric, oblique, and perspective sketches show objects:
  23. The top, front, and bottom views align in this manner:
  24. Drawings created with commercial software are typically saved as:
  25. A civil engineer working on a bridge design would probably rely on his ________ scale for checking printed…
  26. The second line of dimensions out from the plan generally includes ________.
  27. One critical issue drafters need to pay close attention to is the ________.
  28. These are vertical distances above a common datum, reference plane, or point:
  29. There are two main types of projection:
  30. An advantage of this type of view is that each view shows the object all the way through as if it were…