A modem is a card within a PC that converts the …………... the computer produces to ………………….. that can pass over telephone system.

Question

A modem is a card within a PC that converts the …………... the computer produces to ………………….. that can pass over telephone system.

A. Data, signal

B. Analog signal, digital signal

C. Digital signal, analog signal

D. signal, data

Share this question with your friends

Show all Networking MCQ

Comment

In FTP, to execute a file transfer, the user begins by _________.

A. Navigating the directory structure

B. Connecting to a remote host

C. Listing files available for transfer.

D. Defining the transfer mode

Discuss this answer

FTP servers by default listen on port ________ for incoming connections from FTP clients.

A. 20

B. 21

C. 23

D. 25

Discuss this answer

What does a patch cable connect to within an Ethernet network?

A. The patch panel to the hub

B. The patch panel to the wall jack

C. The wall jack to the computer

D. The NIC directly to another computer's NIC

Discuss this answer

A router receives an IP packet with source IP address 130.45.3.3 and destination IP address 202.23.4.16. The router cannot find the destination IP address in its routing table. Which ICMP message should be sent?

A. Time stamp request

B. Router solicitation

C. Destination Unreachable

D. Parameter problem on a datagram

Discuss this answer

Your network has gotten a single class C address but has 300 computers. How can you connect them to the Internet?

A. Use IPX.

B. Implement NAT.

C. Use DHCP.

D. Use DNS.

Discuss this answer

Which is the port used by POP3?

A. 69

B. 110

C. 143

D. 443

Discuss this answer

If the organization allocates 10 bits as subnet number, to identify a physical network, then the organization can have at the most……………. networks and each of these networks that can support only…………………...hosts.

A. 1022 networks, 62 hosts.

B. 62 networks, 1022 hosts.

C. 4094 networks, 14 hosts.

D. 14 networks, 4094 hosts.

Discuss this answer

Which of the following address supports 254 hosts on each of 2 million networks?

A. Class D addresses

B. Class A addresses

C. Class C addresses

D. Class B addresses

Discuss this answer

Which piece of equipment operates at both the data-link and network layers?

A. Hub

B. Bridge

C. Brouter

D. Router

Discuss this answer

Where are routing tables placed?

A. in network interface card

B. in routers memory

C. in server memory

D. in a subnets memory

Discuss this answer

Which class does the IP address 202.119.22.31 belong to?

A. Class A

B. Class B

C. Class C

D. APIPA

Discuss this answer

FDDI operates on 100 Mbps.

A. True.

B. False.

Discuss this answer

Which of the following is the IEEE specification for wireless networks?

A. 802.3

B. 802.5

C. 802.2

D. 802.11b

Discuss this answer

What is the maximum length of thick Ethernet cable before a signal booster is needed?

A. 500 feet

B. 500 meters

C. 1000 feet

D. 2 miles

Discuss this answer

In flags message attribute, which of the following flag indicates that message has been
completed?

A. \Deleted

B. \Recent

C. \Flagged

D. \Draft

Discuss this answer

Which of the following can translate between dissimilar protocols and network types?

A. Hub

B. Repeater

C. Switch

D. Gateway

Discuss this answer

Which of the following is a media type that is most susceptible to interference?

A. Shielded twisted pair (STP)

B. Fiber optics

C. Unshielded twisted pair (UTP)

D. Coaxial

Discuss this answer

What can be used in the place of DNS to resolve host names to IP addresses?

A. WINS

B. LMHosts

C. Hosts

D. DHCP

Discuss this answer

Which of the following can be used to transfer files from a Unix server?

A. FTP

B. Telnet

C. IPX

D. Netstat

Discuss this answer

Which of the following request in Session Initiation Protocol (SIP) queries the capabilities of
servers?

A. CANCEL

B. ACK

C. OPTIONS

D. PRACK

Discuss this answer

Data Transmission is not a layer in the OSI model

A. True.

B. False.

Discuss this answer

Which of the following is currently a de facto standard, commonly used for point-to-point
serial connections running TCP/IP?

A. Fiber Distributed Data Interface (FDDI)

B. Serial Line IP (SLIP)

C. Point-to-Point Protocol (PPP)

D. IEEE 802.3

Discuss this answer

Which type of connector is used on 10Base2 networks?

A. SC

B. BNC

C. RJ-45

D. RJ-11

Discuss this answer

In Integrated services model, ________ corresponds to token bucket filter.

A. Bspec

B. Filter spec

C. Rspec

D. Tspec

Discuss this answer

AppleTalk protocol configures hosts in zones on the network.

A. True.

B. False.

Discuss this answer

Which of the following protocols are considered unreliable or connectionless?

A. UDP

B. TCP

C. FTP

D. TFTP

Discuss this answer

ARP is defined in RFC _ and it is a current internet standard, ____

A. RFC-37, STD 903

B. RFC-903, STD 37

C. RFC 826; STD 37

D. RFC 37; STD 826

Discuss this answer

What is the maximum size of IP header in the UDP Datagram format?

A. 40 bytes

B. 50 bytes

C. 60 bytes

D. 70 bytes

Discuss this answer

The worldwide Internet is a well-known example of ------------------.

A. PAN

B. Subnet

C. Intra-Network

D. Inter-network

Discuss this answer

What is the default subnet mask for a class B network?

A. 255.0.0.0

B. 255.255.0.0

C. 255.255.255.0

D. 255.255.192.0

Discuss this answer

Accepted Answer

C. Digital signal, analog signal

A modem is a card within a PC that converts the …………... the computer produces to ………………….. that can pass over telephone system.

Correct Answer :

Show all Networking MCQ

Related Questions

In FTP, to execute a file transfer, the user begins by _________.

FTP servers by default listen on port ________ for incoming connections from FTP clients.

What does a patch cable connect to within an Ethernet network?

A router receives an IP packet with source IP address 130.45.3.3 and destination IP address 202.23.4.16. The router cannot find the destination IP address in its routing table. Which ICMP message should be sent?

Your network has gotten a single class C address but has 300 computers. How can you connect them to the Internet?

Which is the port used by POP3?

If the organization allocates 10 bits as subnet number, to identify a physical network, then the organization can have at the most……………. networks and each of these networks that can support only…………………...hosts.

Which of the following address supports 254 hosts on each of 2 million networks?

Which piece of equipment operates at both the data-link and network layers?

Where are routing tables placed?

Which class does the IP address 202.119.22.31 belong to?

FDDI operates on 100 Mbps.

Which of the following is the IEEE specification for wireless networks?

What is the maximum length of thick Ethernet cable before a signal booster is needed?

In flags message attribute, which of the following flag indicates that message has been
completed?

Which of the following can translate between dissimilar protocols and network types?

Which of the following is a media type that is most susceptible to interference?

What can be used in the place of DNS to resolve host names to IP addresses?

Which of the following can be used to transfer files from a Unix server?

Which of the following request in Session Initiation Protocol (SIP) queries the capabilities of
servers?

Data Transmission is not a layer in the OSI model

Which of the following is currently a de facto standard, commonly used for point-to-point
serial connections running TCP/IP?

Which type of connector is used on 10Base2 networks?

In Integrated services model, ________ corresponds to token bucket filter.

AppleTalk protocol configures hosts in zones on the network.

Which of the following protocols are considered unreliable or connectionless?

ARP is defined in RFC _ and it is a current internet standard, ____

What is the maximum size of IP header in the UDP Datagram format?

The worldwide Internet is a well-known example of ------------------.

What is the default subnet mask for a class B network?

Also checkout

A modem is a card within a PC that converts the …………... the computer produces to ………………….. that can pass over telephone system.

Correct Answer :

Show all Networking MCQ

Related Questions

In FTP, to execute a file transfer, the user begins by _________.

FTP servers by default listen on port ________ for incoming connections from FTP clients.

What does a patch cable connect to within an Ethernet network?

A router receives an IP packet with source IP address 130.45.3.3 and destination IP address 202.23.4.16. The router cannot find the destination IP address in its routing table. Which ICMP message should be sent?

Your network has gotten a single class C address but has 300 computers. How can you connect them to the Internet?

Which is the port used by POP3?

If the organization allocates 10 bits as subnet number, to identify a physical network, then the organization can have at the most……………. networks and each of these networks that can support only…………………...hosts.

Which of the following address supports 254 hosts on each of 2 million networks?

Which piece of equipment operates at both the data-link and network layers?

Where are routing tables placed?

Which class does the IP address 202.119.22.31 belong to?

FDDI operates on 100 Mbps.

Which of the following is the IEEE specification for wireless networks?

What is the maximum length of thick Ethernet cable before a signal booster is needed?

In flags message attribute, which of the following flag indicates that message has been completed?

Which of the following can translate between dissimilar protocols and network types?

Which of the following is a media type that is most susceptible to interference?

What can be used in the place of DNS to resolve host names to IP addresses?

Which of the following can be used to transfer files from a Unix server?

Which of the following request in Session Initiation Protocol (SIP) queries the capabilities of servers?

Data Transmission is not a layer in the OSI model

Which of the following is currently a de facto standard, commonly used for point-to-point serial connections running TCP/IP?

Which type of connector is used on 10Base2 networks?

In Integrated services model, ________ corresponds to token bucket filter.

AppleTalk protocol configures hosts in zones on the network.

Which of the following protocols are considered unreliable or connectionless?

ARP is defined in RFC _____ and it is a current internet standard, ________

What is the maximum size of IP header in the UDP Datagram format?

The worldwide Internet is a well-known example of ------------------.

What is the default subnet mask for a class B network?

Also checkout

In flags message attribute, which of the following flag indicates that message has been
completed?

Which of the following request in Session Initiation Protocol (SIP) queries the capabilities of
servers?

Which of the following is currently a de facto standard, commonly used for point-to-point
serial connections running TCP/IP?

ARP is defined in RFC _ and it is a current internet standard, ____