Home
Current Affairs January 2024

What is the correct answer?

4

A piece of metal of specific gravity 7 floats in mercury of specific gravity 13.6. What fraction of its volume is under mercury?

A. 0.5

B. 0.4

C. 0.515

D. 0.5

Correct Answer :

C. 0.515


Related Questions

What is the correct answer?

4

One cubic metre of water weighs

A. 100 litres

B. 250 litres

C. 500 litres

D. 1000 litres

What is the correct answer?

4

Non uniform flow occurs when

A. The direction and magnitude of the velocity at all points are identical

B. The velocity of successive fluid particles, at any point, is the same at successive periods of time

C. Velocity, depth, pressure, etc. change from point to point in the fluid flow.

D. The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

What is the correct answer?

4

In a free nappe,

A. The pressure below the nappe is atmospheric

B. The pressure below the nappe is negative

C. The pressure above the nappe is atmospheric

D. The pressure above the nappe is negative

What is the correct answer?

4

The flow which neglects changes in a transverse direction is known as

A. One dimensional flow

B. Uniform flow

C. Steady flow

D. Turbulent flow

What is the correct answer?

4

Bulk modulus of a fluid __________ as the pressure increases.

A. Remain same

B. Decreases

C. Increases

D. None of these

What is the correct answer?

4

The Newton's law of resistance is based on the assumption that the

A. Planes of the body are completely smooth

B. Space around the body is completely filled with the fluid

C. Fluid particles do not exert any influence on one another

D. All of the above

What is the correct answer?

4

An open tank containing liquid is made to move from rest with a uniform acceleration. The angle 0 which the free surface of liquid makes with the horizontal is such that (where a = Horizontal acceleration of the tank, and g = Acceleration due to gravity)

A. tanθ = a/g

B. tanθ = 2 a/g

C. tanθ = a/2g

D. tanθ = a2/2g

What is the correct answer?

4

In open channels, the specific energy is the

A. Total energy per unit discharge

B. Total energy measured with respect to the datum passing through the bottom of the channel

C. Total energy measured above the horizontal datum

D. Kinetic energy plotted above the free surface of water

What is the correct answer?

4

A uniform body 3 m long, 2 m wide and 1 m deep floats in water. If the depth of immersion is 0.6 m, then the weight of the body is

A. 3.53 kN

B. 33.3 kN

C. 35.3 kN

D. None of these

What is the correct answer?

4

The unit of dynamic viscosity in S.I. units is

A. N-m/s2

B. N-s/m2

C. Poise

D. Stoke

What is the correct answer?

4

The kinematic viscosity of an oil (in stokes) whose specific gravity is 0.95 and viscosity 0.011 poise, is

A. 0.0116 stoke

B. 0.116 stoke

C. 0.0611 stoke

D. 0.611 stoke

What is the correct answer?

4

Density of water is maximum at

A. 0° C

B. 0° K

C. 4° C

D. 100° C

What is the correct answer?

4

The loss of pressure head in case of laminar flow is proportional to

A. Velocity

B. (Velocity)2

C. (Velocity)3

D. (Velocity)4

What is the correct answer?

4

When the water level on the downstream side of a weir is above the top surface of a weir, the weir is known as

A. Narrow-crested weir

B. Broad-crested weir

C. Ogee weir

D. Submerged weir

What is the correct answer?

4

The Cipoletti weir is a __________ weir.

A. Rectangular

B. Triangular

C. Trapezoidal

D. Circular

What is the correct answer?

4

Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, in the direction of flow of the liquid, is known as

A. Lift

B. Drag

C. Stagnation pressure

D. Bulk modulus

What is the correct answer?

4

Free surface of a liquid behaves like a sheet and tends to contract to smallest possible area due to the

A. Force of adhesion

B. Force of cohesion

C. Force of friction

D. Force of diffusion

What is the correct answer?

4

Which of the following instrument can be used for measuring speed of a submarine moving in deep sea?

A. Venturimeter

B. Orifice plate

C. Hot wire anemometer

D. Pitot tube

What is the correct answer?

4

Choose the wrong statement. Alcohol is used in manometer, because

A. Its vapour pressure is low

B. It provides suitable meniscus for the inclined tube

C. Its density is less

D. It provides longer length for a given pressure difference

What is the correct answer?

4

The capillary rise at 20°C in a clean glass tube of 1 mm bore containing water is approximately

A. 5 mm

B. 10 mm

C. 20 mm

D. 30 mm

What is the correct answer?

4

A metal with specific gravity of a floating in a fluid of same specific gravity a will

A. Sink to bottom

B. Float over fluid

C. Partly immersed

D. Be fully immersed with top surface at fluid surface

What is the correct answer?

4

The Metacentric heights of two floating bodies A and B are 1 m and 1.5 m respectively. Select the correct statement.

A. The bodies A and B have equal stability

B. The body A is more stable than body B

C. The body B is more stable than body A

D. The bodies A and B are unstable

What is the correct answer?

4

The coefficient of discharge in case of internal mouthpiece is __________ that of external mouthpiece.

A. Less than

B. More than

C. Equal to

D. None of these

What is the correct answer?

4

The resultant upward pressure of the fluid on an immersed body due to its tendency to uplift the submerged body is called

A. Up-thrust

B. Reaction

C. Buoyancy

D. Metacentre

What is the correct answer?

4

The property of a fluid which enables it to resist tensile stress is known as

A. Compressibility

B. Surface tension

C. Cohesion

D. Adhesion

What is the correct answer?

4

If w is the specific weight of liquid and k the depth of any point from the surface, then pressure intensity at that point will be

A. h

B. wh

C. w/h

D. h/w

What is the correct answer?

4

The flow in a pipe is neither laminar nor turbulent when Reynold number is

A. Less than 2000

B. Between 2000 and 2800

C. More than 2800

D. None of these

What is the correct answer?

4

During the opening of a valve in a pipe line, the flow is

A. Steady

B. Unsteady

C. Uniform

D. Laminar

What is the correct answer?

4

The power transmitted through the pipe is maximum when the head lost due to friction is equal to

A. One-fourth of the total supply head

B. One-third of the total supply head

C. One-half of the total supply head

D. Two-third of the total supply head

What is the correct answer?

4

In a footstep bearing, if the speed of the shaft is doubled, then the torque required to overcome the viscous resistance will be

A. Double

B. Four times

C. Eight times

D. Sixteen times