A safety valve usually employed with stationary boilers is

A. Lever safety valve

B. Dead weight safety valve

C. High steam and low water safety valve

D. All of these

Related Questions

  1. In case of non-condensing steam engines, the pressure of steam in the cylinder during exhaust stroke…
  2. The pressure velocity compounded impulse turbine allows a bigger pressure drop and hence __________…
  3. The natural draught is produced by
  4. Desecration of feed water is carried out because it reduces
  5. The critical pressure gives the velocity of steam at the throat
  6. A _________ in a boiler is used to put off fire in the furnace of the boiler when the level of water…
  7. A device used to put off fire in the furnace of the boiler when the level of water in the boiler falls…
  8. An impulse turbine as compared to a reaction turbine, for a given power has _________ row of blades.
  9. The function of a flywheel is
  10. If a steam sample is nearly in dry condition, then its dryness fraction can be most accurately determined…
  11. Steam engine operates on
  12. In a De-Laval nozzle expanding superheated steam from 10 bar to 0.1 bar, the pressure at the minimum…
  13. For burning 1 kg of carbon to CO as per chemically correct combustion, amount of air required is
  14. Which of the following is correct? (Where pa = Actual mean effective pressure, pm = Theoretical mean…
  15. In accelerated circulation type boiler
  16. The difference of supersaturated temperature and saturation temperature at that pressure is called
  17. In order to compare the capacity of boilers, the feed water temperature and working pressure are taken…
  18. Degree of reaction is defined as the ratio of
  19. The behaviour of coal in a furnace is determined by
  20. A safety valve in a locomotive starts leaking. The leaking medium will be
  21. The function of injector used in small capacity boilers is to
  22. Carbonisation of coal is the process of
  23. In a boiler, feed water supplied per hour is 205 kg while coal fired per hour is 23 kg. The net enthalpy…
  24. At critical point, i.e. p = 225.65 kg/cm², the latent enthalpy of vaporisation is
  25. The diameters of fire tubes and superheater tubes in locomotive boiler are
  26. Secondary air is the air used to
  27. The dry saturated steam at very low pressure, (510 kg/cm²) when throttled to atmosphere will become
  28. The diameter of Cornish boiler varies from
  29. In locomotives, the draught is produced by
  30. The change in internal energy in steam engines equals to

Please do not use chat terms. Example: avoid using "grt" instead of "great".