Related Questions
What is the correct answer?
4
The packet transmit using standard Internet Protocol(IP) throughout the Internet by
What is the correct answer?
4
In ________ routing, the tunnel creates a bridge through areas that do not support
multicast traffic.
C. Border Gateway Protocol
What is the correct answer?
4
Which class of IP addressing was not brought in much use?
What is the correct answer?
4
Which directory service is used in Windows 2000 Server?
What is the correct answer?
4
Thick Ethernet cable uses what type of connector? Select all that apply.
What is the correct answer?
4
Which type of BGP message is sent by a system to notify another router of the senders existence?
What is the correct answer?
4
What is the code used for Interpret As Command (IAC)?
What is the correct answer?
4
Which of the following protocols is described in RFC 793?
A. Address Resolution Protocol (ARP)
B. Transmission Control Protocol (TCP)
C. Bootstrap Protocol (BOOTP)
D. User Datagram Protocol (UDP)
What is the correct answer?
4
Which of the following can support many concurrent B-channel links and one 64 Kbps Dchannel?
A. ISDN Basic Rate Interface (BRI)
B. ISDN Primary Rate Interface (PRI)
C. Point-to-Point circuit (PPP)
What is the correct answer?
4
…………………… have a single communication channel that is shared by all the users on the network.
What is the correct answer?
4
_______ body looks after the protocol identifiers used over Internet.
A. Transmission Control Protocol
D. Network Control Protocol
What is the correct answer?
4
A router receives an IP packet with source IP address 130.45.3.3 and destination IP address 202.23.4.16. The router cannot find the destination IP address in its routing table. Which ICMP message should be sent?
C. Destination Unreachable
D. Parameter problem on a datagram
What is the correct answer?
4
UDP datagram has a header, which is of ________.
What is the correct answer?
4
Which of the following is used for testing the data-link connection in a PPP network?
A. Link Control Protocol (LCP)
C. Network Control Protocols (NCPs)
D. Basic Rate Interface (BRI)
What is the correct answer?
4
To communicate across a TCP/IP network, you must have a DNS server and DNS clients installed.
What is the correct answer?
4
FDDI operates on 100 Mbps.
What is the correct answer?
4
Which of the following protocols were designed for terminal emulation to connect dissimilar systems?
D. Control Message Protocol
What is the correct answer?
4
BGP is …………………………………….routing protocol used to ………………………….routing table.
A. intrautonomous system, update
B. Interautonomous system, update
C. Interautonomous system, create
D. intrautonomous system, create
What is the correct answer?
4
ARP is defined in RFC _____ and it is a current internet standard, ________
What is the correct answer?
4
In TCP segment format _______indicates start of data.
What is the correct answer?
4
Which is the port used by HTTPS?
What is the correct answer?
4
Which of the following can provide a backbone network of 600 meters in length without using repeaters?
What is the correct answer?
4
You're asked to install a Citrix MetaFrame XP server. What protocol will clients use to connect and run graphical terminal emulation to the new server?
What is the correct answer?
4
Which of the following provides a structure for conveying message through TCP/IP network
to host?
A. Address Resolution protocol (ARP)
B. Internet Control Message Protocol (ICMP)
C. Bootstrap Protocol (BOOTP)
D. Dynamic Host Configuration Protocol (DHCP)
What is the correct answer?
4
Which of the following are not the standard representations defined by Telnet protocol?
What is the correct answer?
4
Which of the following IP addresses are used by multicast devices?
What is the correct answer?
4
What are the subnet mask in dotted decimal notation for /20 networks?
What is the correct answer?
4
Following are the advantages of tree topology
i) Point-to-point wiring for individual segments.
ii) Supported by several hardware and software venders.
iii) Easy to install and wire
What is the correct answer?
4
Which type of connector is used on 10Base2 networks?
What is the correct answer?
4
127.0.0.1 address is reserved for internal loopback functions.