Home

Angle of action of cam is defined as the angle

A. Of rotation of the cam for a definite displacement of the follower

B. Through which the cam rotates during the period in which the follower remains in the highest position

C. Moved by the cam from the instant the follower begins to rise, till it reaches its highest position

D. Moved by the cam from beginning of ascent to the termination of descent

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. The Kutzbach criterion for determining the number of degrees of freedom (n) is (where l = number of…
  2. In S.H.M., the velocity vector w.r.t. displacement vector
  3. In the below figure, PC is the connecting rod and OC is the crank making an angle θ with the line…
  4. In a rigid link OA, velocity of A w.r.t. O will be
  5. In considering friction of a V-thread, the virtual coefficient of friction (μ₁) is given…
  6. The length of a simple pendulum which gives the same frequency as the compound pendulum, is
  7. In elliptical trammels
  8. Which type of gear train is used in clock mechanism to join hour hand and minute hand?
  9. In a reciprocating steam engine, when the crank has turned from inner dead centre through an angle θ,…
  10. The direction of linear velocity of any point on a link with respect to another point on the same link…
  11. When the elements of a pair are kept in contact by the action of external forces, the pair is said to…
  12. Which one of the following is an exact straight line mechanism using lower pairs?
  13. The centre of gravity of a coupler link in a four bar mechanism will experience
  14. The maximum efficiency of spiral gears is (where θ = Shaft angle, and φ = Friction angle)
  15. One end of a helical spring is fixed while the other end carries the load W which moves with simple…
  16. The frictional torque transmitted in a truncated conical pivot bearing, considering uniform pressure,…
  17. In the two rotor system as shown in the below figure (I₁ < I₂), a node of vibration is…
  18. The steering of a ship means
  19. When a point at the end of a link moves with constant angular velocity, its acceleration will have
  20. The velocity of sliding __________ the distance of the point of contact from the pitch point.
  21. The C.G. of a link in any mechanism would experience
  22. In vibration isolation system, if ω/ωn < 2, then for all values of damping factor, the transmissibility…
  23. The lead screw of a lathe with nut forms a
  24. The frictional torque transmitted in a flat pivot bearing, assuming uniform wear, is (Where μ =…
  25. The static balancing is satisfactory for low speed rotors but with increasing speeds, dynamic balancing…
  26. The partial balancing of reciprocating parts in locomotives produces
  27. When the load on the engine increases, it becomes necessary to increase the supply of working fluid…
  28. The coriolis component of acceleration is taken into account for
  29. If two moving elements have surface contact in motion, such pair is known as
  30. The Scott-Russell mechanism consists of