Styrene
Phenol
Benzene
Tri-nitro-toluene
B. Phenol
Remove impurities/gangue
Enhance rate of reaction
Accelerate reduction of ore
Separate slag from metal
SO3 gas is sparingly soluble in water
Water forms an acid mist, which is difficult to absorb
The purity of acid is affected
Scale formation in the absorber is to be avoided
Causes reduction in its dissolved oxygen content thereby endangering the life of aquatic creatures
Reduces sulphate ions to sulphides causing obnoxious smell
Increases the quantity of chlorine used for its purification
All (A), (B) and (C)
Benzene hexachloride
Alkyl benzene sulphonate
Polytetrafluoroethylene
Cellulose nitrate
Exothermic
Endothermic
Autocatalytic
None of these
Lime, clay and soda ash
Sand, lime and soda ash
Silica, alumina and clay
Silica, alumina and soda ash
Storage under improper conditions
Absence of unsaturation
Its smaller molecular weight
None of these
Better heat & acid resistant properties
Poorer resistance to alkalis
Poorer dyeability
All (A), (B) and (C)
Gives an idea about its molecular weight
Is inversely proportional to its molecular weight
Detects its adulteration
All (A), (B) & (C)
Employs addition polymerisation
Employs condensation polymerisation
Is a monomer
Is an abrasive material
Which is an addition reaction
Which is a substitution reaction
In absolute dark
In presence of sunlight
Light & heavy leather respectively
Heavy & light leather respectively
Both light & heavy leather
Neither light nor heavy leather
Coke
Ammonia
Tar
Phenol
Molasses
Benzol
Methylated spirit
None of these
High pressure & low temperature
Low pressure & high temperature
High pressure & high temperature
Low pressure & low temperature
Air
Water
Nitrogen
Helium
Solvay
Ostwald's
Haber's
None of these
Hematite
Magnetite
Siderite
Chalcopyrite
Chlorine dioxide (ClO2)
MgO
SO2 gas
Mercaptans
Trichloroethylene
Vinyl chloride
Ethanol amine
Ethylene oxide
Increasing the surface tension
Decreasing wettability
Supplying hydrophilic group
None of these
Emulsification
Dispersion
Precipitation
Wetting
Cold rubber (SBR) is superior as compared to hot rubber (SBR)
Polymerisation temperature can modify the properties of SBR
Production of cold SBR employs lower pressure as compared to that of hot SBR
None of these
Making protective gas (95% N2 + 5% H2) for annealing of cold rolled steel strip coils
Fire fighting purposes
Both (A) & (B)
Neither (A) nor (B)
Bakelite
Teflon
Perspex
Nylon-6
Cellulose nitrate
Regenerated cellulose nitrate
Regenerated cellulose acetate
None of these
Baking soda
Baking powder
Washing soda
None of these
CaCO3
ZnO
Al2O3
Fe
Evaporation and burning the concentrate followed by causticisation of products
Multi-effect evaporation only
Selective liquid extraction
Extractive distillation
Used in glycerine manufacture
An explosive
Used in dye manufacture
None of these