Home

Colour comparator is used to measure the

A. pH value

B. Electrode potential

C. Colour intensity

D. None of these

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and…
  2. Often earing defects are found during deep drawing operation, because the
  3. Nusselt number/Biot number varies
  4. __________ wire is never used for making the heating element.
  5. Dryness factor of steam is defined as the ratio of the mass of vapor in the mixture to the mass of the…
  6. Which of the following terminology is used for the temperature at which new grains are formed in a metal?
  7. LVDT used for displacement measurement is a/an __________ transducer.
  8. Identify the correct statement with reference to the extractive metallurgy of aluminium.
  9. Work required for compression of a gas contained in a cylinder is 7000 kJ. During compression, heat…
  10. Diameter of the rivet to be provided on a 20 mm. thick boiler plate will be __________ mm.
  11. Out of the following __________ iron has the best capability to bear sudden & excessive shocks.
  12. __________ of test specimens is not involved in any hardness testing method.
  13. Midrex process of sponge iron production uses reformed natural gas as the reducing agent, which uses…
  14. Principal alloying element in Elinvar (used for making hair springs for watches) is
  15. One of the methods of purification of leach liquor is ion exchange, which involves
  16. Basicity of the slag in Indian blast furnace is in the range of
  17. __________ rubber is generally used for making 'O' rings used for vacuum sealings.
  18. Wavelength of radiation emitted by a body depends on the __________ of its surface.
  19. At absolute zero temperature, for any reaction involving condensed phases
  20. The product out from a cupola is called
  21. Faraday's law of electrolysis is related to the
  22. On oscilloscope screen for dynamic measurement, lissajous diagram is normally used to determine the…
  23. Stainless steel is welded with difficulty because of
  24. Consideration of the creep is the most important in case of the
  25. Tumbling is the process of improving the __________ of the materials/parts.
  26. The concentration of (H+) ions is 4 x 10-5 in a solution. Then pH of the solution will be (Given log…
  27. As the fluid flow rate increases, the float of the Rotameter
  28. __________ the exhaust gas is an indication of the incomplete combustion of fuel.
  29. Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at…
  30. The laminar boundary layer thickness in zero pressure gradient flow over a flat plate along the x-direction…