Related Questions
What is the correct answer?
4
The velocity of a body moving with simple harmonic motion is __________ at the mean position.
What is the correct answer?
4
The mechanism forms a structure, when the number of degrees of freedom (n) is equal to
What is the correct answer?
4
The purpose of a link is to
What is the correct answer?
4
The contact ratio for gears is
What is the correct answer?
4
In a Hartnell governor, if a spring of greater stiffness is used, then the governor will be
C. Unaffected of sensitivity
What is the correct answer?
4
Which of the following mechanism is obtained from lower pair?
What is the correct answer?
4
Sensitiveness of the governor is defined as the ratio of the
A. Mean speed to the maximum equilibrium speed
B. Mean speed to the minimum equilibrium speed
C. Difference of the maximum and minimum equilibrium speeds to the mean speed
D. Sum of the maximum and minimum equilibrium speeds to the mean speed
What is the correct answer?
4
The instantaneous centres which vary with the configuration of mechanism are called
A. Permanent instantaneous centres
B. Fixed instantaneous centres
C. Neither fixed nor permanent instantaneous centres
What is the correct answer?
4
The factor which affects the critical speed of a shaft is
What is the correct answer?
4
The frictional torque transmitted in a truncated conical pivot bearing, considering uniform wear, is
A. (1/2). μ W cosec α (r₁ + r₂)
B. (2/3).μ W cosec α (r₁ + r₂)
C. (1/2). μ W cosec α [(r₁³ - r₂³)/(r₁² - r₂²)]
D. (2/3). μ W cosec α [(r₁³ - r₂³)/(r₁² - r₂²)]
What is the correct answer?
4
The natural frequency of free longitudinal vibrations is equal to (where m = Mass of the body, s = Stiffness of the body, and δ = Static deflection of the body)
What is the correct answer?
4
A simple spring-mass vibrating system has a natural frequency of fn. If the spring stiffness is halved and the mass is doubled, then the natural frequency will become
What is the correct answer?
4
The coriolis component of acceleration leads the sliding velocity by
What is the correct answer?
4
Angle of dwell of cam is defined as the angle
A. During which the follower returns to its initial position
B. Of rotation of the cam for definite displacement of the follower
C. Through which the cam rotates during the period in which the follower remains in the highest position
D. Moved by the cam from the instant the follower begins to rise, till it reaches its highest position
What is the correct answer?
4
A body in motion will be subjected to coriolis acceleration when that body is
A. In plane rotation with variable velocity
B. In plane translation with variable velocity
C. In plane motion which is a resultant of plane translation and rotation
D. Restrained to rotate while sliding over another body
What is the correct answer?
4
The ratio of maximum fluctuation of energy to the workdone per cycle is called
B. Maximum fluctuation of energy
C. Coefficient of fluctuation of energy
What is the correct answer?
4
The frictional torque transmitted in a conical pivot bearing, considering uniform pressure, is (where R = Radius of shaft, and α = Semi-angle of the cone)
What is the correct answer?
4
The displacement of the reciprocating roller follower, when it has contact with the straight flanks of the tangent cam, is given by (where r₁ = Minimum radius of the cam, r₂ = Radius of the roller follower, and θ = Angle turned by the cam from the beginning of the follower displacement)
C. (r₁ - r₂) [(1 - cosθ)/cos θ]
D. (r₁ + r₂) [(1 - cosθ)/cos θ]
What is the correct answer?
4
In a flat collar pivot bearing, the moment due to friction is proportional to
C. (r₁³ - r₂³)/(r₁² - r₂²)
What is the correct answer?
4
The Ackermann steering mechanism is preferred to the Davis type in automobiles because
A. The former is mathematically accurate
B. The former is having turning pair
C. The former is most economical
D. The former is most rigid
What is the correct answer?
4
When the crank is at the inner dead centre, in a reciprocating steam engine, then the velocity of the piston will be
What is the correct answer?
4
The method of obtaining different mechanisms by fixing in turn different links in a kinematic chain, is known as
What is the correct answer?
4
The condition for correct steering of a Davis steering gear is (where α = Angle of inclination of the links to the vertical)
What is the correct answer?
4
Crowning on pulleys helps
A. In increasing velocity ratio
B. In decreasing the slip of the belt
C. For automatic adjustment of belt position so that belt runs centrally
D. Increase belt and pulley life
What is the correct answer?
4
In order to give a complete secondary balance of a multi-cylinder inline engine,
A. The algebraic sum of the secondary forces must be equal to zero
B. The algebraic sum of the couples about any point in the plane of the secondary forces must be equal to zero
What is the correct answer?
4
ABCD is a four bar mechanism in which AB = 310 mm and CD = 450 mm. AB and CD are both perpendicular to the fixed link AD, as shown in the below figure. If the velocity of B at this condition is v. Then the velocity of C is
What is the correct answer?
4
The magnitude of linear velocity of a point B on a link AB relative to point A is (Where ω = Angular velocity of the link AB)
What is the correct answer?
4
A disc is a spinning with an angular velocity ω rad/s about the axis of spin. The couple applied to the disc causing precession will be (where I = Mass moment of inertia of the disc, and ωP = Angular velocity of precession of the axis of spin)
What is the correct answer?
4
The frictional torque transmitted by a disc or plate clutch is same as that of
D. Truncated conical pivot bearing
What is the correct answer?
4
For simple harmonic motion of the of follower, a cosine curve represents