Related Questions
What is the correct answer?
4
What is the pattern of a preamble?
What is the correct answer?
4
Which of the following delivery methods works with only one source and one destination? Multicast
What is the correct answer?
4
___________ is based on resources that are present within the Diffserv region.
What is the correct answer?
4
________allows receiver to inform sender about the successful receiving of all the
segments.
C. Selective Acknowledgment (SACK)
D. Maximum segment size option
What is the correct answer?
4
Which type of connector is used on 10Base2 networks?
What is the correct answer?
4
TCP protocol is responsible for connection-oriented communication
What is the correct answer?
4
Your Web server is also configured as an FTP server. What part of the data packet will tell the server which application the data is meant for?
What is the correct answer?
4
ARP is defined in RFC _____ and it is a current internet standard, ________
What is the correct answer?
4
How many number of host/machine can be attached to a network using a class B address?
What is the correct answer?
4
What is the maximum length of thick Ethernet cable before a signal booster is needed?
What is the correct answer?
4
To communicate across a TCP/IP network, you must have a DNS server and DNS clients installed.
What is the correct answer?
4
Which of the following can be used to transfer files from a Unix server?
What is the correct answer?
4
You've taken your Windows 2000 laptop to a client's network and plugged it in. Your computer is configured for an IP network over 100BaseT using DHCP. You can't connect, even though the client says that DHCP is working on his 100BaseT network. What should
A. Use Ipconfig /release to release the old DHCP address.
B. Use Winipcfg and click Release to release the old DHCP address.
C. Use Ifconfig to initialize the NIC.
D. Use Tracert to determine the problem.
What is the correct answer?
4
FDDI operates on 100 Mbps.
What is the correct answer?
4
Transmission medias are classified into two main categories, which are -------------- and --------------------.
D. synchronous, Asynchronous
What is the correct answer?
4
Your network has gotten a single class C address but has 300 computers. How can you connect them to the Internet?
What is the correct answer?
4
Which of the following is used for testing the data-link connection in a PPP network?
A. Link Control Protocol (LCP)
C. Network Control Protocols (NCPs)
D. Basic Rate Interface (BRI)
What is the correct answer?
4
A network's Internet connection uses a 128-Kbps Basic Rate Interface (BRI). What type of connection is this?
What is the correct answer?
4
The Point-to-Point Protocol (PPP) is described in which of the following?
What is the correct answer?
4
FTP servers by default listen on port ________ for incoming connections from FTP clients.
What is the correct answer?
4
Which of the following defines a family of standards for 100 Mbps fiber optic LANs that
provides the physical layer and media access control sub-layer of the data link layer, as
defined by the ISO/OSI Model?
C. Fiber Distributed Data Interface (FDDI)
D. Point-to-Point Protocol (PPP)
What is the correct answer?
4
________acts as source and destination for IP traffic.
What is the correct answer?
4
What is the default subnet mask for a class A network?
What is the correct answer?
4
Which OSI model layer provides for encryption and decryption of data?
What is the correct answer?
4
Which of the following protocol was developed to overcome limitations of Routing
Information Protocol (RIP)?
A. Border Gateway Protocol (BGP)
B. Exterior Gateway Protocol (EGP)
C. Enhanced Interior Gateway Routing Protocol (EIGRP)
D. Open Shortest Path First (OSPF)
What is the correct answer?
4
Which piece of equipment operates at both the data-link and network layers?
What is the correct answer?
4
The general form of the SMTP destination address is ________________.
A. user% remote-host@gateway-host
C. local-part@domain-name
What is the correct answer?
4
You've taken your Windows 2000 laptop to a client's network and plugged it in. Your computer is configured for an IP network over 100BaseT using DHCP. You can't connect, even though the client says that DHCP is working on his 100BaseT network. What should
A. Use Ipconfig /release to release the old DHCP address.
B. Use Winipcfg and click Release to release the old DHCP address.
C. Use Ifconfig to initialize the NIC.
D. Use Tracert to determine the problem.
What is the correct answer?
4
Thinnet coaxial cable uses what type of connector?
What is the correct answer?
4
Which of the following can be used to transfer files from a Unix server?