Aluminium
Silver
Copper
All (A), (B) and (C)
A. Aluminium
Xanthates
Stearic acid
Calcium & aluminium stearate
Formic acid
15-30
90-100
250-300
< 0
Phenol
Naphthalene
Benzene
Pyridine
Proteins with high molecular weight (around 10,000)
Derived from living organisms
Catalyst for temperature sensitive reactions
All (A), (B) and (C)
Electrolysis
Electrolytic reduction
Electrolytic oxidation
None of these
Soft potassium soaps (potassium salt of fatty acid) with free Stearic acid to give lather a lasting property
Metallic soaps compounded with frothing agents
High free alkali soaps having excess of cane sugar and alcohol
None of these
Polyurethane
Silicone
Teflon
Epoxy resin
SO3 gas is sparingly soluble in water
Water forms an acid mist, which is difficult to absorb
The purity of acid is affected
Scale formation in the absorber is to be avoided
Nylon-6
Dacron
Polyester
PVC
Phosgene
Calcium hypochlorite
Chlorine
Ammonium chloride
Colloids
Gel
Butter
Emulsion
Nylon-6
Paper
Antibiotics
Sugar
Gives higher conversion efficiency
Has a longer life and is not poisoned by arsenic
Handles lower SO2 content gas (7 -10% SO2), thus increasing the capital cost of the plant
All (A), (B) and (C)
Improve its resistance to rancid oxidation
Raise its melting point
Remove double bonds
None of these
Do not soften on application of heat
Are heavily branched molecules
Are solvent insoluble
None of these
Polythene
Epoxy polymer
P.V.C.
Polystyrene
Electrical insulator
Allotrope of carbon
Moderator used in nuclear reactor
Both (B) and (C)
Na2CO3
NaHCO3
H2
None of these
Hydrogenation
Hydrolysis
Hydrocracking
Hydration
Resistance to the action of organic solvent
Tackiness
Maximum service temperature
Tensile strength
1 atm & 100°C
5 atm & 275°C
100 atm & 500°C
50 atm & 1000°C
3
12
22
0.3
Is a good adhesive
Is an elastomer
Cannot be used for surface coatings
Is a polyester
Dry process is used for the manufacture of cement, when the raw material is blast furnace slag
Portland cement is made employing wet process
Gypsum is added to Portland cement to lengthen its setting time
None of these
PVC
Silicone
Polyurethanes
Polyamides
Phthalic anhydride
Vinyl chloride
Maleic anhydride
Dacron
Increase the density of cement
Decrease the cement setting rate
Both (A) and (B)
Neither (A) nor (B)
Moving
Fixed
Fluidised
Entrained
Naphthalene
Benzol
Ethyl alcohol
Phthalic anhydride
Detergent
Rubber
Pesticide
Polyester