Home

Fatigue limit improvement by over stressing the metal by successively increasing the load is called coaxing. In fatigue failure, the material fails

A. Below the yield point

B. Above the yield point

C. Below the elastic limit

D. At the elastic limit

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. Hydrogen in liquid steels is dissolved
  2. Spheroidising of a material is a/an __________ process.
  3. Corrosion is
  4. Plastics as a material of construction suffer from the drawback of low
  5. Which of the following is not an explosive?
  6. Dry saturated steam can be converted into superheated steam by
  7. Thermal diffusivity of a substance is proportional to (where, k = Thermal conductivity)
  8. Which of the following is preferred for riveting?
  9. Batch process is preferred over continuous process, when the
  10. In the diving apparatus, helium is used along with oxygen, because it is
  11. Pick out the correct statement.
  12. Silicon crystal can be converted to p-type semiconductor by doping with
  13. The cathode in an electrochemical cell always carries
  14. Adhesives
  15. In the X-ray radiography technique, the tube voltage for thicker plates as compared to thin plates,…
  16. The most commonly used moderator in nuclear power plants is
  17. Galvanic corrosion cannot be prevented by
  18. The units of the rate constant for a second order reaction are
  19. Which of the following approaches the ideal gas behaviour most closely?
  20. Material of construction of the electrode used in the electric resistance welding is
  21. __________ can replace tungsten in high speed steel.
  22. Gratings is associated with the measurement of
  23. Milk is fat dispersed in water. It is an example of
  24. The escape velocity of a body on earth which is independent of its mass is about __________ km/second.
  25. Electrostatic separation of minerals from each other is based on their differences in the following…
  26. The friction factor for the turbulent fluid flow in a rough pipe does not depend upon the
  27. Dies for wire drawing are generally made of
  28. Between 230 and 370°C, blue brittleness is caused in mild steel because of the
  29. Fog is an example of colloidal system of
  30. Metallic surveying tapes are made of __________ which has a low co-efficient of expansion & enough strength.