Related Questions
What is the correct answer?
4
This is how axonometric, oblique, and perspective sketches show objects:
What is the correct answer?
4
In order to create an isometric circle to represent a hole through the top surface of a box, the drafter must insure that the correct iso-plane has been selected by scrolling through the iso-planes using the ________ key.
What is the correct answer?
4
Oblique drawings are dimensioned in a similar fashion as these types of drawings:
What is the correct answer?
4
When only a small section of an interior area needs to be revealed the drafter can use a ________ section.
What is the correct answer?
4
Architectural drafters generally prefer to use ________ drawings to help illustrate 3-dimensional views of a structure.
What is the correct answer?
4
In the section view, the areas that would have been in actual contact with the cutting plane are shown with:
What is the correct answer?
4
Acceptable parts must not extend beyond this:
What is the correct answer?
4
In oblique sketches, the most commonly used angles for receding lines are:
What is the correct answer?
4
This type of solid is egg-shaped and can be created by revolving an ellipse around one of its axes:
What is the correct answer?
4
There are two main types of projection:
A. Parallel and Orthographic
B. Station-point and Perspective
C. Parallel and Convergent
D. Perspective and Parallel
What is the correct answer?
4
When dimensioning architectural drawings architects will utilize both ________ and ________ options.
A. Baseline and continuous
What is the correct answer?
4
In working drawings, these show all necessary information not given directly on the drawing with its dimensions and notes:
D. Title and record strips
What is the correct answer?
4
This type of section is limited by a break line:
What is the correct answer?
4
A full scale technical drawing will have a scale factor of ________.
What is the correct answer?
4
Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.
B. Type 3 back slash and enter
C. Type 3 forward slash and enter
D. Type 3 and try to use the Dynamic Input readout to find the end point
What is the correct answer?
4
The MASSPROP shortcut will provide the following information.
What is the correct answer?
4
Dimensions are used on the elevation plan to describe ________.
A. Finished floor elevations
What is the correct answer?
4
Lines of an isometric drawing that are not parallel to the isometric axes are called this:
What is the correct answer?
4
The principle views associated with orthographic projection are ________.
What is the correct answer?
4
This practice considers an individual part's dimensions and tolerances and that part's relation to its related parts:
B. Geometric dimensioning and tolerancing
C. Creating datum references
D. Angular dimensioning tolerances
What is the correct answer?
4
To avoid having to dimension to a hidden feature the drafter can utilize a ________ section.
What is the correct answer?
4
CAD programs which incorporate parametric modeling utilize a system in which the dimensions control the ________.
A. Size and shape of the model features
B. Perspective of the model
C. Shading used to render the model
What is the correct answer?
4
A cylinder can be created by drawing a rectangular shape then the ________ tool.
What is the correct answer?
4
When filling an area with a hatch pattern in Auto-CAD the drafter needs to be able to ________.
A. See the entire bounding area to hatch
D. Set the layer to Defpoints
What is the correct answer?
4
In U.S. structural and architectural drafting, all dimensions of this length are usually expressed in feet and inches:
What is the correct answer?
4
This is the measured size of a finished part:
What is the correct answer?
4
These drawings are given to contractors to perform work or manufacture individual parts:
What is the correct answer?
4
Given a situation in which the drafter has crossed extension lines in a drawing what can be done to clean up the point of crossing?
A. Use the Modify tool to clean up the extension lines
B. Use the Tolerance tool to clean up the extension lines
C. Use the Break tool to clean up the extension lines
D. Use the stretch tool to clean up the extension lines
What is the correct answer?
4
When designing a home for a client, one of the most important predesign considerations that an architect needs to address is ________.
A. How much money the client is willing to spend
B. The site on which the house is to sit
C. The nearest grocery store
D. Whether or not there is a curb and gutter system
What is the correct answer?
4
An oil refinery relies on which type of drafter to maintain and update the technical piping drawings used for the construction and maintenance of the facility.