Home
Current Affairs January 2024

What is the correct answer?

4

Hydraulic accumulator is used for

A. Accumulating oil

B. Supplying large quantities of oil for very short duration

C. Generally high pressures to operate hydraulic machines

D. Supplying energy when main supply fails

Correct Answer :

D. Supplying energy when main supply fails


Related Questions

What is the correct answer?

4

According to fan laws, for the fans having constant wheel diameters, the power demand varies

A. Directly as fan speed

B. Square of fan speed

C. Cube of fan speed

D. Square root of fan speed

What is the correct answer?

4

The flow ratio of Francis turbine is defined as the ratio of the

A. Velocity of flow at inlet to the theoretical jet velocity

B. Theoretical velocity of jet to the velocity of flow at inlet

C. Velocity of runner at inlet to the velocity of flow at inlet

D. None of the above

What is the correct answer?

4

High specific speed of turbine implies it is

A. Propeller turbine

B. Francis turbine

C. Impulse turbine

D. None of the above

What is the correct answer?

4

Specific speed for reaction turbines ranges from

A. 0 to 4.5

B. 10 to 100

C. 80 to 200

D. 250 to 300

What is the correct answer?

4

In impulse Turbine, energy available at the inlet is in the form of

A. Potential Energy

B. Strain Energy

C. Kinetic energy

D. None of these

What is the correct answer?

4

The depth of the bucket for a Pelton wheel is generally ________ the diameter of jet.

A. Equal to

B. 1.2 times

C. 1.8 times

D. Double

What is the correct answer?

4

Medium specific speed of a pump implies it is

A. Centrifugal pump

B. Mixed flow pump

C. Axial flow pump

D. Any one of the above

What is the correct answer?

4

Slip of a reciprocating pump is negative, when

A. Suction pipe is short and pump is running at low speeds

B. Delivery pipe is long and pump is running at high speeds

C. Suction pipe is short and delivery pipe is long and the pump is running at low speeds

D. Suction pipe is long and delivery pipe is short and the pump is running at high speeds

What is the correct answer?

4

The speed of an imaginary turbine, identical with the given turbine, which will develop a unit power under a unit head, is known as

A. Normal speed

B. Unit speed

C. Specific speed

D. None of these

What is the correct answer?

4

The maximum number of jets, generally, employed in an impulse turbine without jet interference are

A. Two

B. Four

C. Six

D. Eight

What is the correct answer?

4

The discharge of a double acting reciprocating pump is (where L = Length of stroke, A = Cross-sectional area of piston, and N = Speed of crank in r.p.m.)

A. L.A.N

B. 2 L.A.N

C. (L.A.N)/60

D. (2 L.A.N)/60

What is the correct answer?

4

In order to avoid cavitation in centrifugal pumps

A. The suction pressure should be high

B. The delivery pressure should be high

C. The suction pressure should be low

D. The delivery pressure should be low

What is the correct answer?

4

The static head of a centrifugal pump is equal to the ________ of suction head and delivery head.

A. Product

B. Difference

C. Sum

D. None of these

What is the correct answer?

4

The discharge through a reaction turbine ________ with the increase in unit speed.

A. Decreases

B. Increases

C. Remain same

D. None of these

What is the correct answer?

4

Low specific speed of turbine implies it is

A. Propeller turbine

B. Francis turbine

C. Impulse turbine

D. Any one of the above

What is the correct answer?

4

Which of the following statement is correct?

A. The centrifugal pump is suitable for large discharge and smaller heads.

B. The centrifugal pump requires less floor area and simple foundation as compared to reciprocating pump.

C. The efficiency of centrifugal pump is less as compared to reciprocating pump.

D. All of the above

What is the correct answer?

4

Which of the following pump is successfully used for lifting water from deep wells?

A. Centrifugal pump

B. Reciprocating pump

C. Jet pump

D. Air lift pump

What is the correct answer?

4

In a centrifugal pump, the liquid enters the pump

A. At the top

B. At the bottom

C. At the canter

D. From sides

What is the correct answer?

4

The mechanical efficiency of an impulse turbine is

A. Ratio of the actual power produced by the turbine to the energy actually supplied by the turbine

B. Ratio of the actual work available at the turbine to the energy imparted to the wheel

C. Ratio of the Work done on the wheel to the energy of the jet

D. None of the above

What is the correct answer?

4

The function of guide vanes in a reaction turbine is to

A. Allow the water to enter the runner without shock

B. Allow the water to flow over them, without forming eddies

C. Allow the required quantity of water to enter the turbine

D. All of the above

What is the correct answer?

4

The maximum efficiency of jet propulsion of a ship with inlet orifices at right angles to the direction of motion of ship, is

A. 40 %

B. 50 %

C. 60 %

D. 80 %

What is the correct answer?

4

Which of the following turbine is preferred for a specific speed of 60 to 300 r.p.m.?

A. Pelton wheel

B. Francis turbine

C. Kaplan turbine

D. None of these

What is the correct answer?

4

The impeller of a centrifugal pump may have

A. Volute casing

B. Volute casing with guide blades

C. Vortex casing

D. Any one of these

What is the correct answer?

4

An impulse turbine is used for

A. Low head of water

B. High head of water

C. Medium head of water

D. High discharge

What is the correct answer?

4

The maximum hydraulic efficiency of an impulse turbine is (where φ = Angle of blade tip at outlet)

A. (1 + cos φ)/2

B. (1 - cos φ)/2

C. (1 + sin φ)/2

D. (1 - sin φ)/2

What is the correct answer?

4

In a centrifugal pump, the regulating valve is provided on the

A. Casing

B. Delivery pipe

C. Suction pipe

D. Impeller

What is the correct answer?

4

A Pelton wheel working under a constant head and discharge, has maximum efficiency when the speed ratio is

A. 0.26

B. 0.36

C. 0.46

D. 0.56

What is the correct answer?

4

Multistage centrifugal pumps are used to obtain

A. High discharge

B. High head

C. Pumping of viscous fluids

D. High head and high discharge

What is the correct answer?

4

Mechanical efficiency of a centrifugal pump is the ratio of

A. Energy available at the impeller to the energy supplied to the pump by the prime mover

B. Actual workdone by the pump to the energy supplied to the pump by the prime mover

C. Energy supplied to the pump to the energy available at the impeller

D. Manometric head to the energy supplied by the impeller per kN of water

What is the correct answer?

4

A hydraulic press is a device used

A. To store pressure energy which may be supplied to a machine later on

B. To increase the intensity of pressure of water by means of energy available from a large quantity of water at a low pressure

C. To lift larger load by the application of a comparatively much smaller force

D. All of the above