If the gravitational acceleration at any place is doubled, the weight of a body, will
Be reduced to half
Be doubled
Not be affected
None of these
Correct Answer :
B. Be doubled
Related Questions
The velocity ratio of the differential wheel and axle is
R/r1 - r2
2R/r1
3R/r1 - r2
2R/r1 + r2
A particle moves with a velocity of 2 m/sec in a straight line with a negative acceleration of 0.1 m/sec2. Time required to traverse a distance of 1.5 m, is
40 sec
30 sec
20 sec
15 sec
The reaction at the support A of the beam shown in below figure is 
2 t
5.8 t
0.2 t
3.5 t
Time period and length of a seconds pendulum respectively are
1 sec and 99.4 cm
1 sec and 92.7 cm
2 sec and 99.4 cm
2 sec and 92.7 cm
The piston of a steam engine moves with a simple harmonic motion. The crank rotates 120 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 0.5 metre from the centre, is
5.88 m/sec
8.88 m/sec
10.88 m/sec
12.88 m/sec
If a ball which is dropped from a height of 2.25 m on a smooth floor attains the height of bounce equal to 1.00 m, the coefficient of the restitution between the ball and floor, is
0.25
0.50
0.67
0.33
A projectile is fired with a velocity of 100.3 m/sec. at an elevation of 60°. The velocity attained by the projectile when it is moving at a height of 100 m, is
70 m/sec
75 m/sec
80 m/sec
90 m/sec
For a body moving with simple harmonic motion, the number of cycles per second, is known as its
Oscillation
Amplitude
Periodic time
Frequency
A load of 500 kg was lifted through a distance of 13 cm. by an effort of 25 kg which moved through a distance of 650 cm. The mechanical advantage of the lifting machine is
15
18
20
26
Two forces of 6 Newtons and 8 Newtons which are acting at right angles to each other, will have a resultant of
5 Newtons
8 Newtons
10 Newtons
12 Newtons
The acceleration of a particle moving along the circumference of a circle with a uniform speed, is directed
Radially
Tangentially at that point
Away from the centre
Towards the centre
Two objects moving with uniform speeds are 5 m apart after 1 second when they move towards each other and are 1 m apart when they move in the same direction. The speeds of the objects are
2 m/sec and 2 m/sec
3 m/sec and 2 m/sec
3 m/sec and 3 m/sec
4 m/sec and 6 m/sec
The unit of Moment of Inertia of a body, is
m
m2
m3
m4
The motion of a particle is described by the relation x = t2- 10t + 30, where x is in metres and t in seconds. The total distance travelled by the particle from t = 0 to t = 10 seconds would be
Zero
30 m
50 m
60 m
Which one of the following laws is not applicable to a simple pendulum?
The time period does not depend on its magnitude
The time period is proportional to its length l
The time period is proportional to l, where l is length
The time period is inversely proportional to g, where g is the acceleration due to gravity
The force which produces an acceleration of 1 m/sec2 in a mass of one kg, is called
Dyne
Newton
Joule
Erg
A shell travelling with a horizontal velocity of 100 m/sec explodes and splits into two parts, one of mass 10 kg and the other of 15 kg. The 15 kg mass drops vertically downward with initial velocity of 100 m/sec and the 10 kg mass begins to travel at an angle to the horizontal of tan1 x, where x is
3/4
4/5
5/3
3/5
On a ladder resting on a rough ground and leaning against a smooth vertical wall, the force of friction acts
Downwards at its upper end
Upwards at its upper end
Perpendicular to the wall at its upper end
Zero at its upper end
One end of a light string 4 m in length is fixed to a point on a smooth wall and the other end fastened to a point on the surface of a smooth sphere of diameter 2.25 m and of weight 100 kg. The reaction between the sphere and the wall of the arrangement made is
102.5 kg
105.5 kg
108.5 kg
110 kg
A heavy ladder resting on floor and against a vertical wall may not be in equilibrium if
Floor is smooth and wall is rough
Floor is rough and wall is smooth
Both floor and wall are rough
Both floor and wall are smooth
In a lifting machine with efficiency 60%, an effort of 200 N is required to raise a load of 6 kN. The velocity ratio of the machine is
30
50
60
80
A block of weight 50 kg is placed on a horizontal plane. When a horizontal force of 18 kg is applied, the block is just on the point of motion. The angle of friction is
17° 48'
18° 48'
19° 48'
20° 48'
The C.G. of the shaded area of the below figure whose curve OM is a parabola from y-axis, is 
a/4
3a/4
3b/10
3a/10
When a body in equilibrium undergoes an infinitely small displacement, work imagined to be done, is known as
Imaginary work
Negative work
Virtual work
None of these
M.I. of a thin ring (external diameter D, internal diameter d) about an axis perpendicular to the plane of the ring, is
π/64 (D4 + d4)
π/32 (D4 - d4)
π/32 (D4 + d4)
π/32 (D4 × d4)
Joule is the unit of
Work
Force
Power
Torque
Ball A of mass 250 g moving on a smooth horizontal table with a velocity of 10 m/s hits an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after impact would be
Zero
5 m/sec
10 m/sec
None of these
A weight W is suspended at the free end of a light member hinged to a vertical wall. If the angle of inclination of the member with the upper wall is θ°, the force introduced in the member, is
W sec θ
W cos θ
W sin θ
W cosec θ
The units of moment of inertia of an area are
kg/m
kg/m2
m4
m3
A disc of mass 4 kg, radius 0.5 m and moment of inertia 3 kgm² rolls on a horizontal surface so that its center moves with speed 5 m/see. Kinetic energy of the disc is
50 J
150 J
200 J
400 J