Home

In a steam engine, the distance by which the outer edge of the Dslide valve overlaps the steam port is called

A. Lead

B. Steam lap

C. Exhaust lap

D. None of these

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. A mechanism is an assemblage of
  2. The static balancing is satisfactory for low speed rotors but with increasing speeds, dynamic balancing…
  3. The radius of a friction circle for a shaft rotating inside a bearing is (where r = Radius of shaft,…
  4. The swaying couple is due to the
  5. Which of the following statement is wrong?
  6. The driving and driven shafts connected by a Hooke's joint will have equal speeds, if
  7. To connect two parallel and coplanar shafts the following type of gearing is used
  8. The example of higher pair is
  9. In Meyer's expansion valve, the expansion valve is driven by an eccentric having an angle of advance…
  10. If the pressure angle is __________, a reciprocating follower will jam in its bearings.
  11. To obviate axial thrust, following gear drive is used
  12. In a ball bearing, ball and bearing forms a
  13. The periodic time of one oscillation for a simple pendulum is
  14. In a flat collar pivot bearing, the moment due to friction is proportional to
  15. In the below figure, PC is the connecting rod and OC is the crank making an angle θ with the line…
  16. Module of a gear is
  17. The following is the inversion of slider crank chain mechanism
  18. A slider moves at a velocity v on a link revolving at ω rad/s. The coriolis component of acceleration…
  19. The maximum fluctuation of energy is the
  20. When the pitching of a ship is upward, the effect of gyroscopic couple acting on it will be
  21. The frequency of oscillation at compared to earth will be
  22. When a mass of a critically damped single degree of freedom system is deflected from its equilibrium…
  23. In multi V-belt transmission, if one of the belt is broken, we have to change the
  24. Two pulleys of radii r₁ and r₂ and at distance x apart are connected by means of an open…
  25. A rigid body, under the action of external forces, can be replaced by two masses placed at a fixed distance…
  26. In order to give a complete secondary balance of a multi-cylinder inline engine,
  27. Which gear train is used for higher velocity ratios in a small space?
  28. A fixed gear having 200 teeth is in mesh with another gear having 50 teeth. The two gears are connected…
  29. A system of masses rotating in different parallel planes is in dynamic balance if the
  30. The secondary unbalanced force is maximum __________ in one revolution of the crank.