In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are.

A. μ , α and θ all have units of m/s

B. μ , α and θ all have units of m2/s

C. α and θ have units of m2/s, while μ has unit of m/s

D. α and θ have units of m/s, while μ has unit of m2/s

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. Methyl orange indicator turns
  2. Thermal conductivity of a material does not depend upon its
  3. A jet engine turbine blade is normally manufactured by
  4. With increase in temperature, the electrical conductivity of a __________ decreases.
  5. To improve the machinability of steel, it is generally subjected to
  6. A material subjected __________ must have high resilience.
  7. With increasing carbon percent in steel beyond 0.8%, its ultimate tensile strength (UTS) and __________…
  8. Ammonia gas can be dried by
  9. Ceramic compounds as compared to metallic compounds
  10. Hot extrusion process is not used for making
  11. __________ is the trade name assigned to a nonferrous cast alloy composed of cobalt, chromium & tungsten.
  12. Alloy powder manufactured by the following process have spherical shapes.
  13. Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation…
  14. The bolt is subjected to __________ when the nut is tightened by putting the washer beneath it.
  15. Use of water as a manometric liquid suffers from the disadvantage of its
  16. Fog is an example of colloidal system of
  17. During sensible heating of humid air
  18. Powder metallurgy is used to produce
  19. Normalising does not __________ of a metal.
  20. Fire in fuel gas pipelines is extinguished most effectively by
  21. An example of unsteady non uniform flow is the flow of liquid under pressure through a
  22. 'Flare tower' used in industry is meant for
  23. Dielectric
  24. Dry saturated steam can be converted into superheated steam by
  25. During sensible cooling of air, its wet bulb temperature
  26. Cemented carbide tools are not suitable for cutting
  27. Pick out the wrong statement.
  28. Which of the following is an example of stress corrosion?
  29. In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________…
  30. The cooling rate required to freeze 1 ton of water at 0°C into ice at 0°C in 24 hours is __________…