Home

In this type of auxiliary view, a break line is used to indicate the imaginary break in the views:

A. Primary

B. Secondary

C. Revolved

D. Partial

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. Inserting blocks into a drawing file usually requires exacting placement. The drafter should insure…
  2. In a CAD system, you can draw an ellipse by specifying these:
  3. Most architectural drawings produced for field use by building contractors are printed on architectural…
  4. Technical drawings typically serve one of three purposes:
  5. In offset sections, offsets or bends in the cutting plane are all:
  6. This is a curve showing the displacement of the follower as ordinates on a base line that represents…
  7. This practice considers an individual part's dimensions and tolerances and that part's relation to its…
  8. A line drawn with a long section, short dash, and another long section is a ________.
  9. In order to set drawing limits for a C size architectural drawing the drafter should set the limits…
  10. 9.The lines used to create the auxiliary view should appear as ________ in the finished view.
  11. There are two main types of projection:
  12. The Auto-CAD command used to combine two or more primitive shapes into a single complex 3-dimensional…
  13. Switches and relays should be shown in this position with no operating force or applied energy:
  14. The text height for room names should be set to ________for a drawing that will be plotted to a scale…
  15. The building construction industry relies on sets of ________ drawings to construct homes and commercial…
  16. This is a conical-shaped recess around a hole, often used to receive a tapered screw head:
  17. Drawings created with commercial software are typically saved as:
  18. In perspective drawings this is placed between the observer and the object:
  19. On typical electronic diagrams, these items need not be shown unless they are needed for clarification:
  20. Understanding the Cartesian coordinate system will help the beginning drafter ________.
  21. If a designer is developing a plan for a project in which the entire part is made out of ¾ thick…
  22. In an oblique drawing, equally spaced partial circles may be used to show this:
  23. These are vertical distances above a common datum, reference plane, or point:
  24. These plans, made by the steel fabricator, are assembly drawings for the steel structure:
  25. When setting up a mechanical drawing in Auto-CAD the drafter should set the units to ________.
  26. In isometric projection, all distances are approximately this percentage of their true size:
  27. The foundation contractor will work with the following architectural plans.
  28. A projection weld is a type of:
  29. These are lines drawn on a map to locate, in the plan view, points of equal ground elevation:
  30. A circular arc is dimensioned in the view where you see its true shape by giving the value for its: