Home

In which of the following type of gear train the first gear and the last gear are co-axial.

A. Simple gear train

B. Compound gear train

C. Reverted gear train

D. None of the above

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. In locomotives, the ratio of the connecting rod length to me crank radius is kept very large in order…
  2. The equivalent length of a simple pendulum which gives the same frequency as a compound pendulum is
  3. A slider moves at a velocity v on a link revolving at ω rad/s. The coriolis component of acceleration…
  4. In a simple train of wheels, the velocity ratio __________ the intermediate wheels.
  5. The ratio of height of Porter governor (when length of arms and links are equal) to the height of Watt's…
  6. The relation between number of pairs (p) forming a kinematic chain and the number of links (l) is
  7. A cam with a roller follower would constitute following type of pair
  8. A rotor which is balanced statically but not dynamically is supported on two bearings L apart and at…
  9. For high speed engines, the cam follower should move with
  10. In a steam engine, the distance by which the outer edge of the Dslide valve overlaps the steam port…
  11. The absolute acceleration of any point P in a link about center of rotation O is
  12. The maximum frictional force, which comes into play, when a body just begins to slide over the surface…
  13. The angle of inclination of the plane, at which the body begins to move down the plane is called
  14. Kinematic pairs are those which have two elements that
  15. The example of higher pair is
  16. In a system subjected to damped forced vibrations, the ratio of maximum displacement to the static deflection…
  17. The Klein's method of construction for reciprocating engine mechanism
  18. The secondary unbalanced force is maximum when the angle of inclination of the crank with the line of…
  19. In a four-bar chain it is required to give an oscillatory motion to the follower for a continuous rotation…
  20. In steady state forced vibrations, the amplitude of vibrations at resonance is __________ damping coefficient.
  21. The ratio of maximum fluctuation of speed to the mean speed is called
  22. Typewriter constitutes
  23. In the two rotor system as shown in the below figure (I₁ < I₂), a node of vibration is…
  24. The frictional torque transmitted in a flat pivot bearing, assuming uniform wear, is (Where μ =…
  25. Scotch yoke mechanism is used to generate
  26. The type of gears used to connect two non parallel and non intersecting shafts is
  27. Which of the following property of the instantaneous centre is correct?
  28. A disturbing mass m₁ attached to the rotating shaft may be balanced by a single mass m₂…
  29. The number of links and instantaneous centers in a reciprocating engine mechanism are
  30. Which of the following statement is correct?