__________ is used as a catalyst in fat splitting.

A. ZnO

B. Ni

C. V2O5

D. FeO

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. Which of the following is used as a coagulant in treating turbid water?
  2. Bitterns is a/an
  3. A good quality coal should have
  4. The function of gypsum addition during cement making is to
  5. Solvay process is used for the manufacture of
  6. Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces
  7. Chemical name of aspirin (an analgesic drug) is
  8. Oil is a/an
  9. Detergent is produced by the sulphonation of dodecyl benzene, which is an __________ reaction.
  10. Ceramics are produced from silicates or clayish materials: Which of the following is not a ceramic material?
  11. How much temperature is maintained during quicklime manufacture in the calcination zone of the vertical…
  12. Phenol formaldehyde resin is used as an adhesive in making
  13. __________ is obtained as a by-product in the manufacture of sodium hydroxide using brine.
  14. Which of the following processes can remove both temporary as well as permanent hardness of water?
  15. During the manufacture of sulphuric acid, the temperature of molten sulphur is not increased beyond…
  16. The most reactive allotropic form of phosphorus is __________ phosphorus.
  17. Maleic anhydride is produced by catalytic oxidation of
  18. __________ are added in lacquers to remove film brittleness and to improve adhereness.
  19. Starting raw material for the manufacture of Maleic anhydride is
  20. Glycerine can be obtained from
  21. Catalytic oxidation of toluene produces
  22. Builders are added in soap to act as
  23. Styrene-butadiene-rubber (SBR) as compared to natural rubber has
  24. The main aim behind cooling the digested chip at the bottom portion of the digestor by injecting cold…
  25. Laboratory glass wares which reacts with hydrofluoric acid, are made of the __________ glass.
  26. Alkylbenzene sulfonate (ABS) is a
  27. The compressive strength of cement should not be less than about 110Kg/cm2 after three days & not less…
  28. Flexible foam (for mattresses) is usually made of
  29. Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively
  30. Roasting of metallurgical ores is done mainly to