Lancashire boiler is a

A. Stationary fire tube boiler

B. Stationary water tube boiler

C. Water tube boiler with natural/forced circulation

D. Mobile fire tube boiler

Related Questions

  1. A device in which some portion of waste heat of flue gases is recovered to heat the air before it passes…
  2. Stoichiometric quantity of air is the
  3. The water tubes in a Babcock and Wilcox boiler are
  4. When the cross-section of a nozzle increases continuously from entrance to exit, it is called a
  5. For the same diameter and thickness of tube, a water tube boiler has ________ heating surface as compared…
  6. The aim of a compound steam engine is
  7. The blade friction in the impulse turbine reduces the velocity of steam by __________ while it passes…
  8. The pressure compounded impulse turbine as compared to velocity compounded turbine require __________…
  9. In a nozzle, the effect of super-saturation is to
  10. Locomotive boiler is a
  11. The critical pressure ratio (p₂/p₁) is given by
  12. The mechanical draught _________ with the amount of smoke.
  13. Which of the following is required for a steam condensing plant?
  14. Equivalent evaporation of water is the evaporation for a feed water supply at 100°C
  15. The relative heat absorption for successively added equal areas of boiler convection heating surfaces
  16. It is required to produce large amount of steam at low pressure. Which boiler should be used?
  17. Which of the following statement is correct for steam turbines as compared to reciprocating steam engines?
  18. The pressure of reheat steam after passing through reheater compared to inlet condition is
  19. The ratio of the isentropic heat drop to the heat supplied, is called
  20. With increase in load, radiant superheater has
  21. The draught (in mm of water), for maximum discharge of flue gases through the chimney, is given by (where…
  22. The pressure of steam __________ while flowing through a nozzle.
  23. In turbines, the fluid undergoes a continuous steady flow process and the speed of flow is
  24. The flow through a nozzle is regarded as
  25. The overall efficiency of thermal power plant is
  26. Degree of reaction is defined as the ratio of
  27. The shell of the Cochran boiler is made hemispherical
  28. If a steam sample is nearly in dry condition, then its dryness fraction can be most accurately determined…
  29. In reaction turbines, the axial thrust is due to
  30. The latent heat of steam at pressures greater than atmospheric in comparison to latent heat at atmospheric…

Please do not use chat terms. Example: avoid using "grt" instead of "great".