Oblique sections are useful to show this:
Foreshortened features
Oblique lines
Interior shapes
Projected features
Correct Answer :
C. Interior shapes
Related Questions
Some of the common terms used to describe technical drawing include:
Drafting
Engineering Graphics
Engineering Drawing
All of the above
The Offset tool should only be used for placing ________ in an isometric drawing.
Circles
Horizontal lines
Vertical lines
None of the above
An accurate record of changes made to release drawings is tracked via this:
A revision block
The basic title form
Working drawings
Portable documents
When filling an area with a hatch pattern in Auto-CAD the drafter needs to be able to ________.
See the entire bounding area to hatch
Set Ortho on
Turn ISO grid off
Set the layer to Defpoints
PDM is the acronym for:
Project drawing management
Product drawing manipulation
Product data management
Project data manipulation
By using a ________ section of a cylindrical mechanical part the drafter should be able to show only one view of the part.
Half
Whole
Revolved
Broken out
These types of pipes are generally connected with bell and spigot joints or flanged joints:
Soil and waste
Water and gas
Water and steam
Gas and soil
This means that a feature of a finished product contains the maximum amount of material permitted by the tolerance dimensions for that feature:
Maximum material condition
Machined material condition
Maximum machined indication
Machine mark indication
The distance a screw thread advances axially in one turn is the:
Lead
Pitch
Turn
Crest
The title block used on working drawings should include the __________.
Sheet number
Line type
Layer set
All of the above
There are two main types of projection:
Parallel and Orthographic
Station-point and Perspective
Parallel and Convergent
Perspective and Parallel
Perspective drawings are classified according to their number of these features:
Station points
Picture planes
Vanishing points
Ground lines
Acceptable parts must not extend beyond this:
Boundary limits
Hole limits
Specification
Tolerances
An oil refinery relies on which type of drafter to maintain and update the technical piping drawings used for the construction and maintenance of the facility.
Architectural
Civil
Process piping
Electrical
Oblique sections are useful to show this:
Foreshortened features
Oblique lines
Interior shapes
Projected features
The ________ is a standard element of a section view in a technical drawing.
Cutting Plane line
Section lines
Material hatch pattern
All of the above
When only a small section of an interior area needs to be revealed the drafter can use a ________ section.
Half
Quarter
Full
Broken out
This is the measured size of a finished part:
Actual size
Dimensioned size
Production size
Basic size
When using versions of Auto-CAD prior to Release 2006 it may be necessary to ________ a block in order to edit it.
Copy
Explode
Offset
None of the above
The View toolbar will position the view of the 3-D solid toward the ________.
Front
Left side
SE isometric
All of the above
This is a systematic approach that integrates the design and manufacture of products with the goal of optimizing the process:
Traditional engineering design
The manufacturing process
Concurrent design
Design for recycling
Before starting an isometric drawing in Auto-CAD the drafter needs to ________.
Set the grid to isometric
Set the current layer to Defpoints
Turn Object Snap off
Turn Ortho off
When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.
Pull the line from away from the starting point very carefully
Insure that Ortho is on
Enter 3 for the length of the line
Read the coordinate position on the Dynamic Readout
This is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic object:
Core
Cavity
Prototype
Hole mold
Once a drawing is determined to be complete, the title block is used to document the change from:
A draft to a finished drawing
A finished to a working drawing
An assembly to a finished drawing
A working drawing to a draft
The Press-Pull tool will ________ the face of a solid model in the direction it faces.
Taper
Extrude
Spiral
None of the above
Understanding the Cartesian coordinate system will help the beginning drafter ________.
Control the accuracy of the drawing
Produce a visible grid system
Select a different text style
Choose various line types
This should show what changes were made, when, and by whom:
Portable document
Record of revisions
Title form
Revision drawings
The site plan illustrates ________.
The floor plan
Where the house sits on the property
The roof plan
Where the garage and driveway are located
The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.
Width
Height
Length
None of the above