One of the methods of purification of leach liquor is ion exchange, which involves

A. Exchange between two liquid phases

B. Exchange between a gaseous phase and a liquid phase

C. Exchange between a liquid phase and an organic resin phase

D. Exchange between a solid phase and a gas phase

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the
  2. Wrought iron is never shaped by
  3. Capacity & power requirement for an air compressor working at high altitude compared to sealevel will…
  4. The passage between the nozzle and the __________ is called 'sprue' in case of injection moulding.
  5. Friction factor for fluid flow in pipe does not depend upon the
  6. Corona discharge is related to the operation of a/an
  7. Thermit welding is categorised as the __________ welding.
  8. Lead is added to 60:40 brass primarily to improve
  9. Solute atoms which cause yield point phenomenon in mild steel are/is
  10. Use of economiser in a boiler plant reduces the fuel consumption for steam generation by about __________…
  11. Specific __________ is a dimensionless quantity.
  12. Cementite is in the lamellar form in the __________ phase of steel.
  13. Water flow in the river during flood can be categorised as the __________ flow.
  14. Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of __________…
  15. __________ rubber is generally used for making 'O' rings used for vacuum sealings.
  16. The underground well of a biogas plant is called the
  17. Quartz is a __________ material.
  18. An example of unsteady non uniform flow is the flow of liquid under pressure through a
  19. According to maximum shear stress failure criterion, yielding in material occurs, when the maximum shear…
  20. More than 95% of __________ is present in corundum.
  21. Carbon supply in pack carburising process is in the form of
  22. The most important requirement for aluminium industry is the availability of cheap
  23. Metal cutting by oxy-acetylene flame is accomplished by the __________ of the metal.
  24. Which of the following has the highest modulus of elasticity (about 7 × 106 kg/cm2)?
  25. Brittleness induced due to the presence of sulphur in steel can be reduced by adding
  26. An alloy of Fe - 0.4 % C is
  27. Thermal efficiency of an internal combustion engine is around __________ percent.
  28. With increase in compression ratio, the volumetric efficiency of air compressor
  29. In case of brasses, with decreasing zinc percentage and increasing copper percentage, its __________…
  30. Absolute zero pressure can be attained at a temperature of