Pick up the correct statement from the following:

Question

Pick up the correct statement from the following:

A. Runway edge from the landing side, is called threshold

B. Localizer indicates to the pilot his position with respect to the proposed alignment

C. The glide slope indicates the correct angle of descent

D. All the above

Share this question with your friends

Show all Airport Engineering MCQ

Comment

As per ICAO, the minimum basic runway length for A and E type of airport will be

A. 1500 m and 600 m

B. 2100 m and 750 m

C. 1500 m and 750 m

D. 2100 m and 600 m

Discuss this answer

Pick up the correct abbreviation from the following:

A. L.M.M. (low powered middle marker)

B. V.H.F, (very high frequency)

C. L.O.M. (low powered outer marker)

D. All the above

Discuss this answer

The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be

A. 2500 m

B. 2600 m

C. 2700 m

D. 2800 m

Discuss this answer

According to I.C.A.O. all markings on the runways are painted white and on taxiways

A. Black

B. Red

C. Yellow

D. Green

Discuss this answer

In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than

A. 20 m

B. 30 m

C. 45 m

D. 51 m

Discuss this answer

Wing loading of an aircraft is

A. Load of the wings

B. Gross total weight of the aircraft/ load of the wings

C. Gross total weight of the aircraft/ wing area

D. Gross total weight of the aircraft/total available H.P of engines

Discuss this answer

The total length of a runway is 1000 m. The elevation at distance 0,200 m, 400 m, 600 m, 800 m and 1000 m are 100.0 m, 99.2 m, 101.0 m, 101.8 m, 101.4 m and 101.0 m respectively. The effective gradient of runway will be.

A. 0.10 %

B. 0.26 %

C. 0.43 %

D. 0.65 %

Discuss this answer

Pick up the correct statement from the following:

A. The basic length of a runway is increased at a rate of 7% per 300 m of elevation of M.S.L.

B. The standard temperature at the site is obtained by reducing the standard sea level temperature of 15°C at the rate of 6.5°C per 1000 m rise in elevation

C. The aerodrome reference temperature is the monthly mean of the mean daily temperature for the hottest month of the year

D. All the above

Discuss this answer

If the width of the approach area near the runway end is 150 m, the width of the approach area at a distance of 3 kilometres from runway end will be

A. 1500 m

B. 1200 m

C. 1000 m

D. 800 m

Discuss this answer

Consider the following statements: Wind rose diagram is used for the purposes of
1. Runway orientation
2. Estimating the runway capacity
3. Geometric design of holding apron of these statements

A. 1 and 2 are correct

B. 2 and 3 are correct

C. 1 and 3 are correct

D. 1 alone is correct

Discuss this answer

Airport elevation is the reduced level above M.S.L. of

A. Control tower

B. Highest point of the landing area

C. Lowest point of the landing area

D. None of these

Discuss this answer

As per ICAO recommendation, minimum width of safety area for instrumental runway should be

A. 78 m

B. 150 m

C. 300 m

D. 450 m

Discuss this answer

Pick up the correct statement from the following:

A. Runway edge from the landing side, is called threshold

B. Localizer indicates to the pilot his position with respect to the proposed alignment

C. The glide slope indicates the correct angle of descent

D. All the above

Discuss this answer

Pick up the correct statement from the following:

A. The distance between the points of intersection of the extreme tangents to the transition curve is kept greater than 7500 m × sum of grade changes at the point of intersection

B. The rate of change of grade is limited to 0.3% per 30 m length of the curve

C. According to I.C.A.O. the maximum longitudinal gradient along a runway is limited to 1.5%

D. All the above

Discuss this answer

The width and interval of transverse centre line bars along the extended centre line of runway, in approach lighting system are

A. 3 m and 30 m

B. 4.2 m and 30 m

C. 4.2 m and 50 m

D. 3 m and 45 m

Discuss this answer

As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed

A. 15 kmph

B. 25 kmph

C. 35 kmph

D. 45 kmph

Discuss this answer

For the taxiways, the following statement is true

A. The maximum longitudinal grade is 3%

B. The permissible rate of change of grade is 1%

C. The permissible transverse grade is 1.5%

D. All the above

Discuss this answer

Assertion A : The ratio of arriving and departing aircrafts influences the airport Capacity: Reason R : Landing operation is generally given priority over the taking off operation. Select your answer based on the coding system given below:

A. Both A and R is true and R is the correct explanation of A

B. Both A and R is true and R is not the correct explanation of A

C. A is true but R is false

D. A is false but R is true

Discuss this answer

Assertion A: The width of a taxiway is smaller than the runway width. Reason R: The speed of the aircraft on a taxiway is greater than that on runway. Select your answer based on coding system given below

A. Both A and R is true and R is the correct explanation of A

B. Both A and R is true but R is not the correct explanation of A

C. A is true but R is false

D. A is false but R is true

Discuss this answer

The length of a runway under standard atmospheric conditions is 1800 m. If the actual reduced level of the site is 1200 m, the design length of the runway is

A. 2360 m

B. 2460 m

C. 2560 m

D. 2660 m

Discuss this answer

The runway length after correcting for elevation and temperature is 2845 m. If the effective gradient on runway is 0.5 percent then the revised runway length will be

A. 2845 m

B. 2910 m

C. 3030 m

D. 3130 m

Discuss this answer

According to the International Civil Aviation Organisation (I.C.A.O.), the runway lengths of aerodromes, have been coded by

A. Seven English alphabets

B. Last Seven English alphabets

C. First Seven English alphabets

D. First seven natural numbers

Discuss this answer

The reduced levels of the ends A and B of a runway are 3025 m and 3035 m and that of its mid-point is 3015 m. The reduced level of the horizontal surface, is

A. 3070 m

B. 3060 m

C. 3075 m

D. 3015 m

Discuss this answer

Conical surface of the approach area rises outwards

A. 1 in 10

B. 1 in 15

C. 1 in 20

D. 1 in 25

Discuss this answer

The length of runway is increased per 300 m rise above M.S.L.

A. 3 %

B. 4 %

C. 5 %

D. 7 %

Discuss this answer

Which of the following factors are taken into account for estimating the runway length required for aircraft landing?
1. Normal maximum temperature
2. Airport elevation
3. Maximum landing weight
4. Effective runway gradient Select the correct answer using the codes given below Codes:

A. 1, 2, 3 and 4

B. 1, 3 and 4

C. 2 and 3

D. 1, 2 and 4

Discuss this answer

The air is blowing at a speed of 75 knots in the direction of the aircraft flying at a ground speed of 775 knots. The air speed of the aircraft, is

A. 775 knots

B. 75 knots

C. 850 knots

D. 675 knots

Discuss this answer

Pick up the correct statement from the following:

A. F.I.R. stands for flight information regions

B. Radius of control area is 160 km

C. Radius of control zone is 40 km

D. All the above

Discuss this answer

The threshold markings are

A. 4 m wide

B. 1 m clear space between adjacent

C. Placed symmetrically on either side of the runway centre line

D. All the above

Discuss this answer

The capacity of parallel runway pattern depends upon

A. Weather conditions and navigational aids available

B. Lateral spacing between two runways and weather conditions

C. Lateral spacing between two runways and navigational aids available

D. Lateral spacing between two runways, weather conditions and navigational aids available.

Discuss this answer

Accepted Answer

D. All the above

Pick up the correct statement from the following:

Correct Answer :

Show all Airport Engineering MCQ

Related Questions

As per ICAO, the minimum basic runway length for A and E type of airport will be

Pick up the correct abbreviation from the following:

The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be

According to I.C.A.O. all markings on the runways are painted white and on taxiways

In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than

Wing loading of an aircraft is

The total length of a runway is 1000 m. The elevation at distance 0,200 m, 400 m, 600 m, 800 m and 1000 m are 100.0 m, 99.2 m, 101.0 m, 101.8 m, 101.4 m and 101.0 m respectively. The effective gradient of runway will be.

Pick up the correct statement from the following:

If the width of the approach area near the runway end is 150 m, the width of the approach area at a distance of 3 kilometres from runway end will be

Consider the following statements: Wind rose diagram is used for the purposes of
1. Runway orientation
2. Estimating the runway capacity
3. Geometric design of holding apron of these statements

Airport elevation is the reduced level above M.S.L. of

As per ICAO recommendation, minimum width of safety area for instrumental runway should be

Pick up the correct statement from the following:

Pick up the correct statement from the following:

The width and interval of transverse centre line bars along the extended centre line of runway, in approach lighting system are

As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed

For the taxiways, the following statement is true

Assertion A : The ratio of arriving and departing aircrafts influences the airport Capacity: Reason R : Landing operation is generally given priority over the taking off operation. Select your answer based on the coding system given below:

Assertion A: The width of a taxiway is smaller than the runway width. Reason R: The speed of the aircraft on a taxiway is greater than that on runway. Select your answer based on coding system given below

The length of a runway under standard atmospheric conditions is 1800 m. If the actual reduced level of the site is 1200 m, the design length of the runway is

The runway length after correcting for elevation and temperature is 2845 m. If the effective gradient on runway is 0.5 percent then the revised runway length will be

According to the International Civil Aviation Organisation (I.C.A.O.), the runway lengths of aerodromes, have been coded by

The reduced levels of the ends A and B of a runway are 3025 m and 3035 m and that of its mid-point is 3015 m. The reduced level of the horizontal surface, is

Conical surface of the approach area rises outwards

The length of runway is increased per 300 m rise above M.S.L.

Which of the following factors are taken into account for estimating the runway length required for aircraft landing?
1. Normal maximum temperature
2. Airport elevation
3. Maximum landing weight
4. Effective runway gradient Select the correct answer using the codes given below Codes:

The air is blowing at a speed of 75 knots in the direction of the aircraft flying at a ground speed of 775 knots. The air speed of the aircraft, is

Pick up the correct statement from the following:

The threshold markings are

The capacity of parallel runway pattern depends upon

Also checkout

Pick up the correct statement from the following:

Correct Answer :

Show all Airport Engineering MCQ

Related Questions

As per ICAO, the minimum basic runway length for A and E type of airport will be

Pick up the correct abbreviation from the following:

The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be

According to I.C.A.O. all markings on the runways are painted white and on taxiways

In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than

Wing loading of an aircraft is

The total length of a runway is 1000 m. The elevation at distance 0,200 m, 400 m, 600 m, 800 m and 1000 m are 100.0 m, 99.2 m, 101.0 m, 101.8 m, 101.4 m and 101.0 m respectively. The effective gradient of runway will be.

Pick up the correct statement from the following:

If the width of the approach area near the runway end is 150 m, the width of the approach area at a distance of 3 kilometres from runway end will be

Consider the following statements: Wind rose diagram is used for the purposes of1. Runway orientation2. Estimating the runway capacity3. Geometric design of holding apron of these statements

Airport elevation is the reduced level above M.S.L. of

As per ICAO recommendation, minimum width of safety area for instrumental runway should be

Pick up the correct statement from the following:

Pick up the correct statement from the following:

The width and interval of transverse centre line bars along the extended centre line of runway, in approach lighting system are

As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed

For the taxiways, the following statement is true

Assertion A : The ratio of arriving and departing aircrafts influences the airport Capacity: Reason R : Landing operation is generally given priority over the taking off operation. Select your answer based on the coding system given below:

Assertion A: The width of a taxiway is smaller than the runway width. Reason R: The speed of the aircraft on a taxiway is greater than that on runway. Select your answer based on coding system given below

The length of a runway under standard atmospheric conditions is 1800 m. If the actual reduced level of the site is 1200 m, the design length of the runway is

The runway length after correcting for elevation and temperature is 2845 m. If the effective gradient on runway is 0.5 percent then the revised runway length will be

According to the International Civil Aviation Organisation (I.C.A.O.), the runway lengths of aerodromes, have been coded by

The reduced levels of the ends A and B of a runway are 3025 m and 3035 m and that of its mid-point is 3015 m. The reduced level of the horizontal surface, is

Conical surface of the approach area rises outwards

The length of runway is increased per 300 m rise above M.S.L.

Which of the following factors are taken into account for estimating the runway length required for aircraft landing?1. Normal maximum temperature2. Airport elevation3. Maximum landing weight4. Effective runway gradient Select the correct answer using the codes given below Codes:

The air is blowing at a speed of 75 knots in the direction of the aircraft flying at a ground speed of 775 knots. The air speed of the aircraft, is

Pick up the correct statement from the following:

The threshold markings are

The capacity of parallel runway pattern depends upon

Also checkout

Consider the following statements: Wind rose diagram is used for the purposes of
1. Runway orientation
2. Estimating the runway capacity
3. Geometric design of holding apron of these statements

Which of the following factors are taken into account for estimating the runway length required for aircraft landing?
1. Normal maximum temperature
2. Airport elevation
3. Maximum landing weight
4. Effective runway gradient Select the correct answer using the codes given below Codes: