Schematic and single-line diagrams should be arranged so that signal or transmission path from input to output proceeds in this fashion:

A. Right to left and top to bottom

B. Right to left and bottom to top

C. Left to right and top to bottom

D. Left to right and bottom to top

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. An accurate record of changes made to release drawings is tracked via this:
  2. Architectural drawings used to construct a house are often plotted with a scale of ¼ = 1'-0.…
  3. The View toolbar will position the view of the 3-D solid toward the ________.
  4. This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal…
  5. A circular arc is dimensioned in the view where you see its true shape by giving the value for its:
  6. On a floor plan the dashed line that appears approximately 24 outside the exterior wall represents the…
  7. In this type of projection, each of the axes has different ratios of foreshortening:
  8. When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
  9. These drawings are given to contractors to perform work or manufacture individual parts:
  10. This is a conical-shaped recess around a hole, often used to receive a tapered screw head:
  11. Newer versions of Auto-CAD utilize the ________ to make block library management very easy.
  12. In order to create one solid model from two or more separate solid shapes the drafter will need to position…
  13. These units are based on inch-foot and yard measurements:
  14. By using a ________ section of a cylindrical mechanical part the drafter should be able to show only…
  15. Welding drawings are a special type of this kind of drawing:
  16. Once a drawing is determined to be complete, the title block is used to document the change from:
  17. Perspective drawings are classified according to their number of these features:
  18. An engineer's scale would be used to measure lines on a drawing where the scale factor reads ________.
  19. This type of surface is tipped to all principal planes of projection and does not appear true size in…
  20. A ________ section allows the drafter to create a Cutting Plane line which is not in a straight line…
  21. The offset distance for the width (front to back) distance of the auxiliary view is the same distance…
  22. 4.The principle reason for using an auxiliary view is ________.
  23. When dimensioning architectural drawings architects will utilize both ________ and ________ options.
  24. This is the bottom surface joining the sides of two adjacent threads:
  25. The thread note for a typical bolt will include the ________.
  26. This is the total amount that the feature on the actual part is allowed to vary from what is specified…
  27. Auto-CAD refers to isometric ellipses as ________.
  28. The Free Orbit tool is found on the ________ toolbar.
  29. The foundation contractor will work with the following architectural plans.
  30. This type of weld is the most common in structural steel fabrication: