Related Questions
What is the correct answer?
4
In this type of view, the cutting plane line indicates both the location of the cutting plane and the direction of sight:
What is the correct answer?
4
These plans, made by the steel fabricator, are assembly drawings for the steel structure:
What is the correct answer?
4
There should be a visible gap between the wall and the ________ line.
What is the correct answer?
4
This type of axonometric drawing has equal foreshortening along two axis directions and a different amount on the third axis:
What is the correct answer?
4
This is the term for the range of tightness or looseness resulting from the allowances and tolerances in mating parts:
What is the correct answer?
4
The second line of dimensions out from the plan generally includes ________.
A. Centers of doors and windows
B. The distances between outside walls and interior walls
C. The measurement from the outside of the brick to the inside of the exterior wall
D. The measurement from one outside corner to the opposite outside corner
What is the correct answer?
4
When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
What is the correct answer?
4
When creating your own blocks it is important to avoid drawing any portion of the block in the ________ layer.
What is the correct answer?
4
Technical drawings typically serve one of three purposes:
A. Visualization, Communication, or Documentation
B. Visualization, Dimensioning, or Documentation
C. Communication, Documentation, or Installation
D. Documentation, Installation, or Engineering
What is the correct answer?
4
Angles project true size only when the plane containing the angle and plane of projection are this:
What is the correct answer?
4
Inserting blocks into a drawing file usually requires exacting placement. The drafter should insure that ________ is turned on.
What is the correct answer?
4
The most common geometric form used in gears today is this:
What is the correct answer?
4
Generally, the units used on an architectural drawing are set to ________.
What is the correct answer?
4
In order to create one solid model from two or more separate solid shapes the drafter will need to position them and then ________.
A. Use Union to join them
C. Use the Add Parts tool
What is the correct answer?
4
These are lines drawn on a map to locate, in the plan view, points of equal ground elevation:
What is the correct answer?
4
The Conceptual Visual Style tool is located on the ________ toolbar.
What is the correct answer?
4
If a designer is developing a plan for a project in which the entire part is made out of ¾ thick plywood and he only wants to use one view, he should use the ________ view.
What is the correct answer?
4
Two-point perspective is also known as:
What is the correct answer?
4
On a floor plan the dashed line that appears approximately 24 outside the exterior wall represents the __________.
What is the correct answer?
4
Architectural dimensioning is usually done in ________.
What is the correct answer?
4
This is the theoretically exact size from which limits of size are determined:
What is the correct answer?
4
These types of projectors converge at a vanishing point:
What is the correct answer?
4
This is the bottom surface joining the sides of two adjacent threads:
What is the correct answer?
4
This type of surface is tipped to all principal planes of projection and does not appear true size in any standard view:
What is the correct answer?
4
One critical issue drafters need to pay close attention to is the ________.
What is the correct answer?
4
Oblique sections are useful to show this:
A. Foreshortened features
What is the correct answer?
4
The principle views associated with orthographic projection are ________.
What is the correct answer?
4
Baseline dimensions are referenced from a common geometric feature known as a ________.
What is the correct answer?
4
Some of the standard Auto-CAD text styles used in architectural drawings includes ________.
What is the correct answer?
4
In a CAD system, you can draw an ellipse by specifying these:
B. The midpoint and end points
C. The center and major and minor axes