Strain hardening effect in a metal subjected to cold working is due to the __________ mechanism.

A. Fracture

B. Dislocation

C. Slip

D. Twinning

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. Which of the following fastening devices has a head at one end and a nut fitted to the other?
  2. Atomic __________ of an element is a whole number.
  3. In case of a, centrifugal pump, the ratio h1/h2 is termed as the __________ efficiency (where, h1 =…
  4. Corrosion of metals cannot be prevented by its
  5. Lap joints are preferred over butt joints in soldering/brazing, because these joints are
  6. Removal of non-condensable from steam or other vapour is termed as the __________ process.
  7. Fire refining process is employed in case of
  8. Cold working of a material results in increase in hardness, which is termed as the __________ hardening.
  9. Steel balls are manufactured by
  10. Lead is poured into the joint between two __________ pipes.
  11. Pick out the wrong statement.
  12. Dryness fraction of dry steam is
  13. Pick out the correct statement about the condensation.
  14. A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation…
  15. One of the methods of purification of leach liquor is ion exchange, which involves
  16. Thermal equivalent of electrical power in practical calculation is __________ kcal/kWh.
  17. Probability of cavitation occuring becomes very high, when the local __________ resulting in water bubbles…
  18. The most commonly used moderator in nuclear power plants is
  19. Cupola produces __________ iron.
  20. A polymer is termed as an 'elastomer', if its percentage elongation is more than 100%. An elastomer…
  21. Which of the following is the correct nature of shear stress distribution along the cross section in…
  22. Which of the following low melting alloy containing bismuth and lead is used for electric fuse?
  23. Most important property of steels for use in automobile bodies is the
  24. Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition…
  25. The co-ordination number in simple cubic structure is
  26. Case hardening is not done by
  27. In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold…
  28. The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the…
  29. The atmospheric temperature during melting of ice/snow (in the atmosphere)
  30. Dies for wire drawing are generally made of