Neutral
Oxidising
Carburising
All of these
B. Oxidising
30% sand and 70% clay
50% sand and 50% clay
70% sand and 30% clay
90% sand and 10% clay
Simple die
Progressive die
Compound die
Combination die
The hot chamber die casting machine is used for casting zinc, tin, lead and other low melting alloys.
The cold chamber die casting machine is used for casting aluminium, magnesium, copper base alloys and other high melting alloys.
The castings produced by centrifugal casting method have open and coarse grained structure.
All of the above
Ferrous alloys with low melting temperature are casted
Ferrous alloys with high melting temperature are casted
Nonferrous alloys with low melting temperature are casted
Nonferrous alloys with high melting temperature are casted
Hardened
Tempered
Hardened and tempered
Case hardened
Uniform solid sections
Uniform hollow sections
Uniform solid and hollow sections
Varying solid and hollow sections
Carbon arc welding
Submerged arc welding
TIG arc welding
MIG arc welding
+0.05 mm
±0.2 mm
+0.5 mm
±1 mm
One is working roll and three are backing up rolls
Two are working rolls and two are backing up rolls
Three are working rolls and one is backing up roll
All of the four are working rolls
30°
45°
50°
60°
Solid form
Gaseous form
Liquid form
Any one of these
Alternating current with high frequency is used
Alternating current with low frequency is used
Direct current is used
Any one of these
Aluminium
Wax
Lead
All of these
The mortise gauge has two scribing pins
The gouges are chisels with a hollow shaped blade
An auger is a planing tool
All of these
Cutting a sheet of metal in a straight line along the length
Removal of metal to the desired shape from the edge of a plate
Cutting a sheet of metal through part of its length and then bending the cut portion
Bending a sheet of metal along a curved axis
Neutral flame and rightward technique
Oxidising flame and leftward technique
Neutral flame and leftward technique
Carburising flame and rightward technique
Shift
Sand wash
Swell
Scab
Age hardening
Work hardening
Induction hardening
Flame hardening
Wire drawing
Tube drawing
Metal cutting
Forging
Nominal size
Basic size
Actual size
Tolerance
Spot welding
Seam welding
Flash butt welding
Upset butt welding
Collapsibility
Permeability
Cohesiveness
Adhesiveness
Permanent mould casting
Slush casting
Die casting
Centrifugal casting
d
1.5 d
3 d
6 d
Work is connected to the positive terminal and the electrode holder to the negative terminal
Work is connected to the negative terminal and the electrode holder to the positive terminal
Work is connected to the positive terminal and the electrode holder is earthed
Work is connected to the negative terminal and the electrode holder is earthed
Results in a mismatching of the top and bottom parts of a casting
Results in general enlargement of the casting
Occurs near the ingates as rough lumps on the surface of a casting
Occurs as sand patches on the upper surface of a casting
TIG welding
MIG welding
Manual arc welding
Submerged arc welding
Large electrode is used
Welding rod coated with slag is used
Welding rod coated with fluxing material is used
None of the above
Rectangular
Square
Hexagonal
Octagonal
It is not possible to reduce at one stage
Annealing is needed between stages
Accuracy in dimensions is not possible otherwise
Surface finish improves after every drawing stage