The centre of gravity a T-section 100 mm × 150 mm × 50 mm from its bottom is
50 mm
75 mm
87.5 mm
125 mm
Correct Answer :
C. 87.5 mm
Related Questions
A single force and a couple acting in the same plane upon a rigid body
Balance each other
Cannot balance each other
Produce moment of a couple
Are equivalent
The C.G. of a plane lamina will not be at its geometrical centre in the case of a
Right angled triangle
Equilateral triangle
Square
Circle
A semicircular disc rests on a horizontal surface with its top flat surface horizontal and circular portion touching down. The coefficient of friction between semi circular disc and horizontal surface is μ. This disc is to be pulled by a horizontal force applied at one edge and it always remains horizontal. When the disc is about to start moving, its top horizontal force will
Remain horizontal
Slant up towards direction of pull
Slant down towards direction of pull
None of the above
The resultant of two forces P and Q (such that P > Q) acting along the same straight line, but in opposite direction, is given by
P + Q
P - Q
P / Q
Q / P
Two balls of equal mass and of perfectly elastic material are lying on the floor. One of the balls with velocity v is made to strike the second ball. Both the balls after impact will move with a velocity
v
v/2
v/4
v/8
The angle which an inclined plane makes with the horizontal when a body placed on it is about to move down is known as angle of
Friction
Limiting friction
Repose
Kinematic friction
The centre of gravity of a uniform lamina lies at
The centre of heavy portion
The bottom surface
The midpoint of its axis
All of the above
If the gravitational acceleration at any place is doubled, then the weight of a body will be
g/2
g
√2.g
2g
Dynamic friction as compared to static friction is
Same
More
Less
May be less of more depending on nature of surfaces and velocity
Which of the following are vector quantities?
Angular displacement
Angular velocity
Angular acceleration
All of these
The resolved part of the resultant of two forces inclined at an angle θ in a given direction is equal to
The algebraic sum of the resolved parts of the forces in the given direction
The sum of the resolved parts of the forces in the given direction
The difference of the forces multiplied by the cosine of θ
The sum of the forces multiplied by the sine of θ
In order to determine the effects of a force, acting on a body, we must know
Magnitude of the force
Line of action of the force
Nature of the force i.e. whether the force is push or pull
All of the above
Two like parallel forces are acting at a distance of 24 mm apart and their resultant is 20 N. It the line of action of the resultant is 6 mm from any given force, the two forces are
15 N and 5 N
20 N and 5 N
15 N and 15 N
None of these
Center of percussion is
The point of C.G.
The point of metacenter
The point of application of the resultant of all the forces tending to cause a body to rotate about a certain axis
Point of suspension
Which of the following is not the unit of distance?
Angstrom
Light year
Micron
Milestone
The term 'Centroid' is
The same as centre of gravity
The point of suspension
The point of application of the resultant of all the forces tending to cause a body to rotate about a certain axis
None of the above
Which of the following statement is correct?
The periodic time of a particle moving with simple harmonic motion is the time taken by a particle for one complete oscillation.
The periodic time of a particle moving with simple harmonic motion is directly proportional to its angular velocity.
The velocity of the particle moving with simple harmonic motion is zero at the mean position.
The acceleration of the particle moving with simple harmonic motion is maximum at the mean position.
Least force required to draw a body up the inclined plane is W sin (plane inclination + friction angle) applied in the direction
Along the plane
Horizontally
Vertically
At an angle equal to the angle of friction to the inclined plane
The moment of inertia of a solid sphere of mass m and radius r is
2mr2/3
2mr2/5
mr2
mr2/2
Moment of inertia of a hollow circular section, as shown in the below figure about an axis perpendicular to the section, is __________ than that about X-X axis. 
Two times
Same
Half
None of these
The rate of doing work is known as
Potential energy
Kinetic energy
Power
None of these
The possible loading in various members of framed structures are
Compression or tension
Buckling or shear
Shear or tension
All of the above
A ladder is resting on a smooth ground and leaning against a rough vertical wall. The force of friction will act
Towards the wall at its upper end
Away from the wall at its upper end
Downward at its upper end
Upward at its upper end
A couple produces
Translatory motion
Rotational motion
Combined translatory and rotational motion
None of the above
The rate of change of displacement of a body is called
Velocity
Acceleration
Momentum
None of these
The force induced in the string BC due to the load W as shown in the below figure is 
W sinθ
W cosθ
W tanθ
W cotθ
A redundant frame is also called __________ frame.
Perfect
Imperfect
Deficient
None of these
Tension in the cable supporting a lift is more when the lift is moving __________ with an acceleration.
Upwards
Downwards
Horizontal
None of these
The centre of gravity of an isosceles triangle with base (p) and sides (q) from its base is
[√(4p² - q²)]/6
(4p² - q²)/6
(p² - q²)/4
(p² + q²)/4
The friction experienced by a body, when in motion, is known as
Rolling friction
Dynamic friction
Limiting friction
Static friction