The dimensions of a half queen closer, are
9 cm × 9 cm × 9 cm
9 cm × 9 cm × 4.5 cm
9 cm × 4.5 cm × 9 cm
1.8 cm × 4.5 cm × 9 cm
Correct Answer :
C. 9 cm × 4.5 cm × 9 cm
Related Questions
The concrete slump recommended for columns, is
25 to 50 mm
25 to 75 mm
75 to 125 mm
50 to 100 mm
For plastering the exposed brick walls, the cement sand mortar should be
1 : 2
1 : 3
1 : 4
1 : 6
The line of intersection of the surfaces of a sloping roof forming an external angle exceeding 180°, is
Ridge
Hip
Valley
None of these
The predominant constituent which is responsible for strength in granite is
Quartz
Felspar
Mica
None of the above
Rotary drilling
Is not suitable for deposits containing very coarse gravel
Hinders the ground water observations and permeability test
Is not economical for holes of less than 10 cm
All the above
The Auger boring method is not suitable for
Very hard soil
Cemented soil
Vary soft soil
All the above
The dimensions of a half queen closer, are
9 cm × 9 cm × 9 cm
9 cm × 9 cm × 4.5 cm
9 cm × 4.5 cm × 9 cm
1.8 cm × 4.5 cm × 9 cm
The type of bond in a brick masonry containing alternate courses of stretchers and headers, is called
Flemish bond
English bond
Stretcher bond
Header bond
The form work from the slabs excluding props, can be removed only after
1 day
4 days
7 days
14 days
A wall constructed to resist the pressure of an earth filling, is called
Retaining wall
Breast wall
Buttress
Parapet wall
In English garden wall bond
One course of headers to three or five course of stretchers
Queen closer in provided in each heading course
The middle course of stretchers is started with a header to give proper vertical joints
All the above
Suitable spacing of timber piles, is
50 cm
60 cm
80 cm
90 cm
Which one of the following rocks is used for monumental buildings?
Granite
Marble
Sand stone
Slate
Minimum width of landing should be
Equal to width of stairs
Half the width of stairs
Twice the width of stairs
One fourth the width of stairs
The taper of precast concrete pile should not be more than
1 cm per metre length
2 cm per metre length
4 cm per metre length
5 cm per metre length
The raft slab is projected beyond the outer walls of the structure by
5 to 10 cm
15 to 20 cm
25 to 30 cm
30 to 45 cm
The type of flooring suitable for use in churches, theatres, public libraries and other places where noiseless floor covering is desired is
Cork flooring
Glass flooring
Wooden flooring
Linoleum flooring
In case of foundations on black cotton soils, the most suitable method to increase the bearing capacity of soils is to
Increase the depth of foundation
Drain the soil
Compact the soil
Replace the poor soil
The type of pointing in which a V-shaped projection outside the wall surface, is provided, is called
Recessed pointing
Weather pointing
V-pointing
Tuck pointing
The depth of concrete bed of the foundation depends upon
The projection of the concrete block beyond the footing over it
The upward soil pressure
The mix of the concrete
All the above
The construction joints in buildings are provided after
10 m
15 m
20 m
40 m
In which of the following pairs both trees yield soft wood?
Deodar and Shishum
Chir and sal
Sal and teak
Chir and deodar
A projecting piece usually provided to support a truss, is
Cornice
Coping
Frieze
Lintel
The type of pile which is driven at an inclination to resist inclined forces is known as
Friction pile
Sheet pile
Batter pile
Anchor pile
Which one of the following activities is not correct as applicable to brick corbels?
The maximum projection of the corbel should not be more than the thickness of the wall
The maximum projection of each corbel course should be limited to a quarter brick at a time
The discontinuous corbels are used to carry heavy concentrated loads
Stretcher bond is generally used for the construction of brick corbel
Herringbone bond is used for
Walls having thickness more than 4 bricks
Architectural finish to the face work
Ornamental panels in brick flooring
All the above
In which of the following directions, the strength of timber is maximum?
Parallel to grains
45° to grains
Perpendicular to grains
Same in all directions
An ordinary concrete may be made water proof by adding
Pudlo
Impermo
Snowcem
All of these
The nominal thickness of an expansion joint in brick walls, is kept more than
5 mm
10 mm
15 mm
20 mm
Sum of tread and rise must lie between
300 to 350 mm
400 to 450 mm
500 to 550 mm
600 to 650 mm