The discharge over a right angled notch is (where H = Height of liquid above the apex of notch)
(8/15) Cd. 2g. H
(8/15) Cd. 2g. H3/2
(8/15) Cd. 2g. H²
(8/15) Cd. 2g. H5/2
Correct Answer :
D. (8/15) Cd. 2g. H5/2
Related Questions
The resultant upward pressure of the fluid on an immersed body due to its tendency to uplift the submerged body is called
Up-thrust
Reaction
Buoyancy
Metacentre
A one dimensional flow is one which
Is uniform flow
Is steady uniform flow
Takes place in straight lines
Involves zero transverse component of flow
The mass of 2.5 m3 of a certain liquid is 2 tonnes. Its mass density is
200 kg/m3
400 kg/m3
600 kg/m3
800 kg/m3
The tangential velocity of the water element having a free vortex is
Directly proportional to its distance from the centre
Inversely proportional to its distance from the centre
Directly proportional to its (distance)2 from the centre
Inversely proportional to its (distance)2 from the centre
The units of dynamic or absolute viscosity are
Metres² per sec
kg sec/meter
Newton-sec per meter
Newton-sec² per meter
The loss of pressure head in case of laminar flow is proportional to
Velocity
(Velocity)2
(Velocity)3
(Velocity)4
Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, in the direction of flow of the liquid, is known as
Lift
Drag
Stagnation pressure
Bulk modulus
When a body, floating in a liquid, is given a small angular displacement, it starts oscillating about a point known as
Centre of pressure
Centre of gravity
Centre of buoyancy
Metacentre
The atmospheric pressure with rise in altitude decreases
Linearly
First slowly and then steeply
First steeply and then gradually
Unpredictable
The upper surface of a weir over which water flows is known is
Crest
Nappy
Sill
Weir top
Re-entrant or Borda's mouthpiece is an __________ mouthpiece.
Internal
External
Both A and B
None of these
A flow through a long pipe at constant rate is called
Steady uniform flow
Steady non-uniform flow
Unsteady uniform flow
Unsteady non-uniform flow
In a forced vortex, the velocity of flow everywhere within the fluid is
Maximum
Minimum
Zero
Nonzero finite
The force of buoyancy is always __________ the weight of the liquid displaced by the body.
Equal to
Less than
More than
None of these
The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by
dQ/Q = (1/2) × (dH/H)
dQ/Q = (3/4) × (dH/H)
dQ/Q = (dH/H)
dQ/Q = (3/2) × (dH/H)
The specific weight of sea water is __________ that of pure water.
Same as
Less than
More than
None of these
The siphon will work satisfactorily, if the minimum pressure in the pipe is __________ vapour pressure of liquid.
Equal to
Less than
More than
None of these
When the pressure intensity at a point is more than the local atmospheric pressure, then the difference of these two pressures is called
Gauge pressure
Absolute pressure
Positive gauge pressure
Vacuum pressure
If the atmospheric pressure on the surface of an oil tank (sp. gr. 0.8) is 0.2 kg/cm, the pressure at a depth of 50 m below the oil surface will be
2 meters of water column
3 meters of water column
5 meters of water column
6 meters of water Column
An average value of coefficient of velocity is
0.62
0.76
0.84
0.97
Gradually varied flow is
Steady uniform
Non-steady non-uniform
Non-steady uniform
Steady non-uniform
The total energy line lies over the hydraulic gradient line by an amount equal to the
Pressure head
Velocity head
Pressure head + velocity head
Pressure head - velocity head
The ratio of absolute viscosity to mass density is known as
Specific viscosity
Viscosity index
Kinematic viscosity
Coefficient of viscosity
Metacentric height is the distance between the metacentre and
Water surface
Center of pressure
Center of gravity
Center of buoyancy
The mercury does not wet the glass. This is due to the property of the liquid known as
Cohesion
Adhesion
Viscosity
Surface tension
The length AB of a pipe ABC in which the liquid is flowing has diameter (d1) and is suddenly enlarged to diameter (d2) at B which is constant for the length BC. The loss of head due to sudden enlargement is
(v₁ - v₂)²/g
(v₁² - v₂²)/g
(v₁ - v₂)²/2g
(v₁² - v₂²)/2g
Which of the following meters is not associated with viscosity?
Red wood
Say bolt
Engler
Orsat
A structure, whose width is __________ the width of the channel, is called a flumed structure.
Less than
More than
Equal
None of these
Specific weight of sea water is more that of pure water because it contains
Dissolved air
Dissolved salt
Suspended matter
All of the above
The density of water is 1000 kg/m3 at
0° C
0° K
4° C
20° C