The distance between main gears is 10 m, and the distance of nose gear from centre of main gears is 30 m. If the angle of turning is 60°, the distance of centre of rotation from the nearer main gear, is
12.30 m
11.30 m
10.30 m
9.30 m
Correct Answer :
A. 12.30 m
Related Questions
The centre to centre spacing of heliport lighting along the periphery of landing and takeoff area should be
2.5 m
5.0 m
7.5 m
10.0 m
Assertion A : Airport capacity during IFR conditions is usually less than that during VFR conditions. Reason R: During clear weather condition (VFR), the aircrafts on final approach to runway can be spaced closer during poor visibility conditions. Select your answer based on the coding system given below:
Both A and R is true and R is the correct explanation of A
Both A and R is true but R is not the correct explanation of A
A is true but R is false
A is false but R is true
The bearing of the runway at threshold is 290°, the runway number is
N 70° W
290°
29°
W 20° N
For night landing, the thresholds are lighted
Green
Red
White
Yellow
To cope up high temperature of 196°C, the taxi ways and aprons are constructed with
Asphaltic concrete
Rubberised tar concrete
Plain concrete
All the above
The minimum width of clearway is
50 m
100 m
150 m
250 m
Runway threshold is indicated by a series of parallel lines starting from a distance of
3 m from runway end
6 m from runway end
10 m from runway end
15 m from runway end
If the width of the approach area near the runway end is 150 m, the width of the approach area at a distance of 3 kilometres from runway end will be
1500 m
1200 m
1000 m
800 m
Pick up the incorrect statement from the following:
L.O.M. is installed at 7.2 km from the threshold
L.M.M. is installed at 1.0 km from the threshold
Localizer antenna is installed at 300 m from the other end of the runway
Glide slope antenna is installed at the centre of the runway about 150 m on one side
The length of clear zone for none instrument runway of a small aircraft is
150 m
300 m
600 m
750 m
Pick up the correct statement from the following:
Tar concrete pavements are suitable if fuel spillage occurs
Rubberised tar concrete hot blast as well as spillage
Epoxy asphalt concrete sets in very small time
All the above
Pick up the correct statement from the following:
Runway edge from the landing side, is called threshold
Localizer indicates to the pilot his position with respect to the proposed alignment
The glide slope indicates the correct angle of descent
All the above
Pick up the correct statement from the following:
Approach zone survey is carried out to determine the elevations of the protruding obstructions above horizontal, conical and transitional surfaces
The wind data of an air port is depicted in the form of a chart known as wind rose
The landing and takeoff of the air craft is made against the wind direction
All the above
The slope of the transitional surface for A, B and C type of runway shall be
1 : 5
1 : 7
1 : 10
1 : 12
Assertion A : The ratio of arriving and departing aircrafts influences the airport Capacity: Reason R : Landing operation is generally given priority over the taking off operation. Select your answer based on the coding system given below:
Both A and R is true and R is the correct explanation of A
Both A and R is true and R is not the correct explanation of A
A is true but R is false
A is false but R is true
According to I.C.A.O. the slope of transitional surface at right angles to the centre line of runway, is kept
1 in 4
1 in 5
1 in 6
1 in 7
Pick up the correct statement from the following:
Approximate geometric centre of the landing area, is called air port reference point
The boundaries of horizontal surface and conical surface are marked with reference to air port reference point
The location of the air port on a map is the position of air port reference point
All the above
Pick up the correct statement from the following:
Landing speed is directly proportional to the wing loading
Wing loading remaining constant, the take off distance is directly proportional to the powder loading
Neither (a) nor (b)
Both (a) and (b)
The size of landing area for multi engine helicopters operating under 1 FR conditions is
22.5 m × 22.5 m
30 m × 30 m
22.5 m × 30 m
60 m × 120 m
According to the International Civil Aviation Organisation (I.C.A.O.), the runway lengths of aerodromes, have been coded by
Seven English alphabets
Last Seven English alphabets
First Seven English alphabets
First seven natural numbers
The coordinates of the ends of a runway are (5000, 5000) and (8000, 7000). The co-ordinates of another runway are (4600, 5100) and (7000, 5300). The co-ordinates of the A.R.P. are
(6500, 6000)
(5800, 5200)
(61500, 5600)
(8000, 7000)
In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than
20 m
30 m
45 m
51 m
Calm period is the percentage of time during which wind intensity is less than
4.8 kmph
6.4 kmph
8.0 kmph
9.6 kmph
As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed
15 kmph
25 kmph
35 kmph
45 kmph
Airport elevation is the reduced level above M.S.L. of
Control tower
Highest point of the landing area
Lowest point of the landing area
None of these
For the proposed runway stated in if the aerodrome reference temperature is 17°.2, the net designed length of the runway is
2716 m
2816 m
2916 m
3016 m
Wing loading of an aircraft is
Load of the wings
Gross total weight of the aircraft/ load of the wings
Gross total weight of the aircraft/ wing area
Gross total weight of the aircraft/total available H.P of engines
If lift off distance of an craft is 2000 m, the clear way at the end of the runway should not be less than
145 m
152.5 m
162.5 m
172.5 m
Which of the following is used for servicing and repairs of the aircraft?
Apron
Hanger
Terminal building
Holding apron
The bearing of the longest line of a wind rose is S 45° E, the bearing of the runway will be numbered
135°
31
13
Both (c) and (d)