Home

The edges of the plates for cylindrical vessels are usually bevelled to an angle of 80° for

A. Reducing stress concentration

B. Ease of manufacture

C. Safety

D. Fullering and caulking

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. The stiffness of a closely coiled helical spring subjected to an axial load W is equal to (where G =…
  2. The taper on cotter varies from
  3. If a bearing is designated by the number 305, it means that the bearing is of
  4. Which of the following formula is used in designing a connecting rod?
  5. A sliding bearing which operates without any lubricant present, is called
  6. In a flange coupling, the bolts are subjected to
  7. If a shaft made from ductile material is subjected to combined bending and twisting moment, calculations…
  8. The difference between the tooth space and the tooth thickness as measured on the pitch circle, is called
  9. A thin spherical shell of internal diameter d is subjected to an internal pressure p. If V is the storage…
  10. Which of the following statement is wrong for a connecting rod?
  11. In designing a key, it is assumed that the distribution of forces along the length of key
  12. A sliding bearing in which although lubricant is present, the working surfaces __________ contact each…
  13. A screw is said to be a self locking screw, if its efficiency is
  14. If the centre distance of the mating gears having involute teeth is varied within limits, the velocity…
  15. Turn buckle has
  16. The minimum number of teeth on the pinion which will mesh with any gear without interference for 20°…
  17. In a marine flange coupling, the thickness of flange is taken as
  18. According to Indian standard specifications, 100 H6/g5 means that
  19. A screw is said to be over hauling screw, if the
  20. Rankine's theory is used for
  21. The period during which the cam follower remains at rest, when cam moves, is known as
  22. According to Indian standards, a bolt thread of 6 mm size of coarse pitch and with allowance on the…
  23. Eye bolts are used for
  24. Which one of the following loading is considered for the design of axles?
  25. A tapered key which fits in a key-way in the hub and is flat on the shaft, is known as
  26. Residual stress in materials
  27. The form factor of a helical gear __________ with the increase in the helix angle.
  28. According to I.B.R., the efficiency of a triple riveted butt joint with double straps of unequal width…
  29. According to I.B.R., the distance between the rows of rivets, for equal number of rivets in more than…
  30. A locking device in which the bottom cylindrical portion is recessed to receive the tip of the locking…