Home

The height of a Watt's governor is

A. Directly proportional to speed

B. Directly proportional to (speed)²

C. Inversely proportional to speed

D. Inversely proportional to (speed)²

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. In a band and block brake, the ratio of tensions on tight side and slack side of the band is (where…
  2. When the two elements of a pair have __________ when in motion, it is said to a lower pair.
  3. Kinematic pairs are those which have
  4. A mechanism consisting of four links is called a __________ mechanism.
  5. The face of the tooth is the
  6. According to Kennedy's theorem, if three bodies have plane motions, their instantaneous centers lie…
  7. Transmission of power from the engine to the rear axle of an automobile is by means of
  8. The frictional torque transmitted in a flat pivot bearing with assumption of uniform pressure is _________…
  9. A shaft carrying two rotors at its ends will have
  10. A point B on a rigid link AB moves with respect to A with angular velocity ω rad/s. The radial…
  11. The tractive force is maximum or minimum when the angle of inclination of crank with the line of stroke…
  12. Crowning on pulleys helps
  13. Two pulleys of radii r₁ and r₂ and at distance x apart are connected by means of a cross…
  14. The total number of instantaneous centres for a mechanism consisting of n links are
  15. With single Hooke's joint it is possible to connect two shafts, the axes of which have an angular misalignment…
  16. Which of the following disciplines provides study of inertia forces arising from the combined effect…
  17. The example of completely constrained motion is a
  18. The coriolis component of acceleration leads the sliding velocity by
  19. In a reciprocating steam engine, when the crank has turned from inner dead centre through an angle θ,…
  20. The example of lower pair is
  21. Critical damping is a function of
  22. When the sleeve of a Porter governor moves downwards, the governor speed
  23. If ω/ωn is very low for a body vibrating under steady state vibrations, the phase angle for…
  24. Angle of action of cam is defined as the angle
  25. The velocity of piston in a reciprocating steam engine is given by (where ω = Angular velocity…
  26. The dynamic friction is the friction experienced by a body, when the body
  27. The critical speed of a shaft in revolution per second is __________ as that of natural frequency of…
  28. Governor is used in automobile to
  29. When the nature of contact between the elements of a pair is such that it can only slide relative to…
  30. A point B on a rigid link AB moves with respect to A with angular velocity ω rad/s. The total acceleration…