Related Questions
What is the correct answer?
4
A weir is said to be broad crested weir, if the width of the crest of the weir is ________ half the height of water above the weir crest.
What is the correct answer?
4
An error of 1% in measuring head over the apex of the notch (H) will produce an error of _________ in discharge over a triangular notch.
What is the correct answer?
4
The critical depth meter is used to measure
A. Velocity of flow in an open channel
B. Depth of flow in an open channel
What is the correct answer?
4
A weir, generally, used as a spillway of a dam is
What is the correct answer?
4
The Francis formula for the discharge over Cipoletti weir is
What is the correct answer?
4
The discharge of a depressed nappe is 6 to 7 percent __________ that of a free nappe.
What is the correct answer?
4
A structure, whose width is __________ the width of the channel, is called a flumed structure.
What is the correct answer?
4
According to equation of continuity,
What is the correct answer?
4
A model of torpedo is tested in a towing tank at a velocity of 25 m/sec. The prototype is expected to attain a velocity of 5 m/sec. What model scale has been used?
What is the correct answer?
4
The hydraulic mean depth for a circular pipe of diameter (d) is
What is the correct answer?
4
A notch is used to measure __________ of liquids.
What is the correct answer?
4
The coefficient of discharge in case of internal mouthpiece is __________ that of external mouthpiece.
What is the correct answer?
4
For pipes, turbulent flow occurs when Reynolds number is
What is the correct answer?
4
The pressure at a point 4 m below the free surface of water is
What is the correct answer?
4
The sheet of water flowing over a notch or a weir is known as
What is the correct answer?
4
A square surface 3 m × 3 m lies in a vertical line in water pipe its upper edge at water surface. The hydrostatic force on square surface is
What is the correct answer?
4
The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach)
A. (2/3) Cd × L.√2g [H1 - Ha]
B. (2/3) Cd × L. √2g [H1 3/2 - Ha 3/2]
C. (2/3) Cd × L.√2g [H1 2 - Ha 2]
D. (2/3) Cd × L. √2g [H1 5/2 - Ha 5/2]
What is the correct answer?
4
The pressure of a liquid measured with the help of a Piezometer tube is
What is the correct answer?
4
The flow in a pipe or channel is said to be non-uniform when
A. The liquid particles at all sections have the same velocities
B. The liquid particles at different sections have different velocities
C. The quantity of liquid flowing per second is constant
D. Each liquid particle has a definite path
What is the correct answer?
4
The total energy line lies over the hydraulic gradient line by an amount equal to the
C. Pressure head + velocity head
D. Pressure head - velocity head
What is the correct answer?
4
When a tank containing liquid moves with an acceleration in the horizontal direction, then the free surface of the liquid
C. Falls on the front end
What is the correct answer?
4
The dynamic viscosity of the liquid __________ with rise in temperature.
What is the correct answer?
4
The time oscillation of a floating body with increase in meatcentric height will be
D. Lower/higher depending on weight of body
What is the correct answer?
4
According to Bazin's formula, the discharge over a rectangular weir is mL2g x H3/2where m is equal to
What is the correct answer?
4
A fluid whose viscosity does not change with the rate of deformation or shear strain is known as
What is the correct answer?
4
Liquids transmit pressure equally in all the directions. This is according to
What is the correct answer?
4
For pipes, laminar flow occurs when Reynolds number is
What is the correct answer?
4
When the flow parameters at any given instant remain same at every point, then flow is said to be
What is the correct answer?
4
Kinematic viscosity is equal to
A. Dynamic viscosity/density
B. Dynamic viscosity × density
C. Density/dynamic viscosity
D. 1/dynamic viscosity × density
What is the correct answer?
4
For a perfect incompressible liquid, flowing in a continuous stream, the total energy of a particle remains the same, while the particle moves from one point to another. This statement is called