Related Questions
What is the correct answer?
4
Which of the following is the most wear resistant grade of carbide used for the cutting tools?
What is the correct answer?
4
Austempering process results in the formation of __________ structure.
What is the correct answer?
4
Sacrificial anode method is used in the protection of pipelines which are buried underground. Sacrificial anode
A. Occurs higher in the electro-chemical series of metals
B. Is exemplified by magnesium plate
C. Is much cheaper than the cathodic base material to be guarded against corrosion
What is the correct answer?
4
Pick out the wrong conversion of absolute & kinematic viscosities.
What is the correct answer?
4
Alloys having more than 80% copper are generally more
C. Prone to season cracking
What is the correct answer?
4
In a furnace with heating element temperature at 1700°C, the dominant mechanism of heat transfer will be
What is the correct answer?
4
An atom bomb works on the principle of
C. Both the nuclear fission & fusion
What is the correct answer?
4
Filler material used in welding should have __________ as compared to the parent metal to be welded.
A. Lower melting temperature
B. Same melting temperature
What is the correct answer?
4
An alloy of Fe - 0.4 % C is
What is the correct answer?
4
During decarburising of a plain carbon steel, the thickness of ferrite layer growth is proportional to
What is the correct answer?
4
Work done by a/an __________ process is determined by ∫p. dv
What is the correct answer?
4
In Newton's law of viscosity, which states that the shear stress is proportional to the __________ Co-efficient of viscosity is called dynamic or absolute viscosity(where, V = velocity, = velocity gradient).
What is the correct answer?
4
Which of the following is a commonly used manometric liquid for low pressure range?
What is the correct answer?
4
Globular form of cementite is formed during the __________ process.
What is the correct answer?
4
Limestone addition in the blast furnace is done to flux __________ present in the raw materials.
What is the correct answer?
4
Dry saturated steam can be converted into superheated steam by
A. Increasing its cross-sectional area of flow
B. Passing it through a pressure reducing valve
C. Forcing it downwards through a vertical tube
What is the correct answer?
4
Case hardening is not done by
What is the correct answer?
4
Reynolds number of a fluid flowing in a circular pipe is 10,000. What will be the Reynolds number when the fluid velocity is decreased by 30% & the pipe diameter is increased by 30%?
What is the correct answer?
4
The critical pressure at which the latent heat of vaporisation of steam becomes zero is __________ Kg/cm2.
What is the correct answer?
4
The normal stress is the same in all directions at a point in a fluid, only when the fluid
A. Is at rest & has zero viscosity
C. Fluid layer has no motion relative to an adjacent layer of fluid
D. is incompressible & frictionless
What is the correct answer?
4
Drills are usually made of
What is the correct answer?
4
Brittleness induced due to the presence of sulphur in steel can be reduced by adding
What is the correct answer?
4
A material in which the atoms are arranged regularly in some directions but not in others, is termed as 'mesomorphous material'; an example of which is
What is the correct answer?
4
Fatigue resistance of a material is measured by the
B. Ultimate tensile strength
What is the correct answer?
4
Large diameter reinforced cement concrete (RCC) pipes are generally joined by __________ joint.
What is the correct answer?
4
A solution which resists change in its pH value on addition of acid/alkali is called the __________ solution.
What is the correct answer?
4
__________ rubber is generally used for making 'O' rings used for vacuum sealings.
What is the correct answer?
4
A material being tested for endurance strength is subjected to the __________ load.
What is the correct answer?
4
Pick out the correct statement about the condensation.
A. Filmwise condensation gives a lower heat transfer rate than the dropwise condensation
B. Suitable coating or vapour additive is used to promote film wise condensation
C. If a condensing liquid does not wet the surface dropwise, even then condensation will take place on it
D. Reynolds number of condensing liquid is based on its mass flow rate
What is the correct answer?
4
The elastic strain energy of a unit length of an edge dislocation as compared to that of a screw dislocation is