Related Questions
What is the correct answer?
4
A flow in which the quantity of liquid flowing per second is constant, is called __________ flow.
What is the correct answer?
4
The value of mass density in kg-sec-V-m⁴ for water at 0°C is
What is the correct answer?
4
The pressure of fluid due to hammer blow is
A. Directly proportional to density of fluid
B. Inversely proportional to density of fluid
C. Directly proportional to (density)1/2 of fluid
D. Inversely proportional to (density)1/2 of fluid
What is the correct answer?
4
The dynamic viscosity of gases __________ with rise in temperature.
What is the correct answer?
4
At the center line of a pipe flowing under pressure where the velocity gradient is zero, the shear stress will be
What is the correct answer?
4
The sheet of water flowing over a notch or a weir is known as
What is the correct answer?
4
Two dimensional flows occurs when
A. The direction and magnitude of the velocity at all points are identical
B. The velocity of successive fluid particles, at any point, is the same at successive periods of time
C. The magnitude and direction of the velocity do not change from point to point in the fluid
D. The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane
What is the correct answer?
4
Total pressure on a lmxlm gate immersed vertically at a depth of 2 m below the free water surface will be
What is the correct answer?
4
The rise or depression of liquid in a tube due to surface tension will increase in size of tube will
C. May increase or decrease depending on the characteristics of liquid
What is the correct answer?
4
The flow of water through the hole in the bottom of a wash basin is an example of
What is the correct answer?
4
Which of the following meters is not associated with viscosity?
What is the correct answer?
4
A moving fluid mass may be brought to a static equilibrium position, by applying an imaginary inertia force of the same magnitude as that of the accelerating force but in the opposite direction. This statement is called
C. D-Alembert's principle
What is the correct answer?
4
The efficiency of power transmission through pipe is (where H = Total supply head, and hf = Head lost due to friction in the pipe)
What is the correct answer?
4
A submerged body is said to be in a stable equilibrium, if its centre of gravity __________ the centre of buoyancy.
What is the correct answer?
4
The conditions for the stable equilibrium of a floating body are
A. The metacentre should lie above the center of gravity
B. The center of buoyancy and the center of gravity must lie on the same vertical line
C. A righting couple should be formed
D. All the above are correct
What is the correct answer?
4
According to Francis formula, the discharge over a rectangular weir is (where n = Number of end contractions)
A. (2/3) × Cd (L - nH) × √(2gh)
B. (2/3) × Cd (L - 0.1nH) × √(2g) × H3/2
C. (2/3) × Cd (L - nH) × √(2g) × H²
D. (2/3) × Cd (L - nH) × √(2g) × H5/2
What is the correct answer?
4
Re-entrant or Borda's mouthpiece is an __________ mouthpiece.
What is the correct answer?
4
The rise of liquid along the walls of a revolving cylinder about the initial level is __________ the depression of the liquid at the axis of rotation.
What is the correct answer?
4
Falling drops of water become spheres due to the property of
What is the correct answer?
4
The error in discharge (dQ/Q) to the error in measurement of head (dH/H) over a rectangular notch is given by
What is the correct answer?
4
The total pressure on an immersed surface inclined at an angle θ with the liquid surface is
What is the correct answer?
4
When a cylindrical vessel containing liquid is resolved, the surface of the liquid takes the shape of
What is the correct answer?
4
In a broad-crested weir, the discharge is maximum if the head of water on the downstream side of weir is __________ the head of water on the upstream side of weir.
What is the correct answer?
4
A flow through an expanding tube at constant rate is called
B. Steady non-uniform flow
D. Unsteady non-uniform flow
What is the correct answer?
4
Kinematic viscosity is equal to
A. Dynamic viscosity/density
B. Dynamic viscosity × density
C. Density/dynamic viscosity
D. 1/dynamic viscosity × density
What is the correct answer?
4
The flow in which each liquid particle has a definite path and their paths do not cross each other is called
What is the correct answer?
4
An open tank containing liquid is moving with an acceleration on an inclined plane. The inclination of the free surface of the liquid will be __________ to the acceleration of the tank.
C. Inversely proportional
What is the correct answer?
4
A flow through a long pipe at decreasing rate is called __________ uniform flow.
What is the correct answer?
4
The resultant upward pressure of the fluid on an immersed body due to its tendency to uplift the submerged body is called
What is the correct answer?
4
The viscosity of a liquid __________ its rate of flow through a hole in a vessel.