Home

The minimum force required to slide a body of weight W on a rough horizontal plane is

A. W sinθ

B. W cosθ

C. W tanθ

D. W cosecθ

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. The instantaneous centre of a rigid thin disc rolling on a plane rigid surface is located at
  2. The relation between number of pairs (p) forming a kinematic chain and the number of links (l) is
  3. Which of the following mechanisms produces mathematically an exact straight line motion?
  4. The unbalanced primary forces in a reciprocating engine are
  5. When the body is suspended at the point of suspension, its periodic time and frequency will be ________…
  6. Tangential acceleration direction is
  7. The distance by which the __________ of the D-slide valve overlaps the steam port is called exhaust…
  8. In a four-bar chain it is required to give an oscillatory motion to the follower for a continuous rotation…
  9. For an involute gear, the ratio of base circle radius and pitch circle radius is equal to
  10. The example of rolling pair is
  11. When the crank is at the inner dead centre, in a reciprocating steam engine, then the acceleration of…
  12. Rectangular bar in a rectangular hole is the following type of pair
  13. When the pitching of a ship is __________ the effect of gyroscopic couple acting on it will be to move…
  14. Which of the following is a lower pair?
  15. In a mechanism, usually one link is fixed. If the fixed link is changed in a kinematic chain, then relative…
  16. In a mechanism, the fixed instantaneous centres are those centres which
  17. In an ideal machine, the output as compared to input is
  18. The unbalanced force due to revolving masses
  19. When there is a reduction in amplitude over every cycle of vibration, then the body is said to have
  20. When a rigid body is suspended vertically and it oscillates with a small amplitude under the action…
  21. Efficiency of a screw jack is given by
  22. When the particles of a body moves perpendicular to its axis, then the body is said to have
  23. If D₁ and D₂ be the diameters of driver and driven pulleys, then belt speed is proportional…
  24. When the crank is at the outer dead centre, in a reciprocating steam engine, then the acceleration of…
  25. Pulley in a belt drive acts as
  26. In a radial cam, the follower moves
  27. Torsional vibrations are said to occur when the particles of a body moves
  28. In a Hartnell governor, if a spring of greater stiffness is used, then the governor will be
  29. In a ball bearing, ball and bearing forms a
  30. The frictional torque transmitted in a flat collar bearing, considering uniform wear, is (where r₁…