The Offset tool should only be used for placing ________ in an isometric drawing.

A. Circles

B. Horizontal lines

C. Vertical lines

D. None of the above

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. When creating your own blocks it is important to avoid drawing any portion of the block in the ________…
  2. In order to convert fractional inches into decimal inches ________.
  3. Objects that are symmetric can be shown effectively using this type of section:
  4. There should be a visible gap between the wall and the ________ line.
  5. A line with a tapering width can be easily created by using the __________ tool.
  6. When using versions of Auto-CAD prior to Release 2006 it may be necessary to ________ a block in order…
  7. This allows the performance of structures to be analyzed and tested efficiently, accurately, and quickly:
  8. Traditional drafters need to be able to create several different line widths because ________.
  9. In this type of dimensioning, allowance must be made for bends:
  10. This type of solid is formed by sweeping a shape along a linear path:
  11. The foundation contractor will work with the following architectural plans.
  12. A partial auxiliary view usually shows only features on the ________ of the inclined line and not any…
  13. When dimensioning piping drawings, you give the lengths of all runs of this type:
  14. This type of structural steel drawing shows all dimensions necessary for fabrication:
  15. The default position of the UCS icon is positioned at ________ on the AutoCAD grid.
  16. 4.The principle reason for using an auxiliary view is ________.
  17. In some circumstances an entire drawing can be inserted into a different drawing as a block. When this…
  18. An advantage of this type of view is that each view shows the object all the way through as if it were…
  19. On typical electronic diagrams, these items need not be shown unless they are needed for clarification:
  20. This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal…
  21. Isometric drawings are often used by ________ to help illustrate complex designs.
  22. This is the intersection of the ground plane with the picture plane:
  23. These are lines drawn on a map to locate, in the plan view, points of equal ground elevation:
  24. In this type of drawing, vertical pipes may be revolved into the horizontal plane:
  25. These maps are used in planning installations of trees, shrubbery, drives, and other garden features:
  26. A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.
  27. When only a small section of an interior area needs to be revealed the drafter can use a ________ section.
  28. Once a drawing is determined to be complete, the title block is used to document the change from:
  29. This is a flat or rounded tab protruding from a surface, usually to provide a method for attachment:
  30. An architect often relies on a ________ to complete the set of technical drawings used in the design…