The overall thermal efficiency of an ideal gas turbine plant is (where r = Pressure ratio)

A. r -1

B. 1 - r -1

C. 1 - (1/r) -1/

D. 1 - (1/r) /-1

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. In a four stage compressor, if the pressure at the first and third stage is 1 bar and 16 bar, then the…
  2. Standard air is the air at ________ and relative humidity of 36 percent.
  3. The ratio of the indicated power to the shaft power or brake power of the motor or engine required to…
  4. The air is delivered ________ in one revolution in case of a three lobbed rotor.
  5. An air compressor may be controlled by
  6. Mechanical efficiency of gas turbines as compared to I.C engines is
  7. The criterion of the thermodynamic efficiency for rotary compressor is
  8. For speed above 3000 km/hour, it is more advantageous to use
  9. High air-fuel ratio in gas turbines
  10. A 3 m³/min compressor means that it
  11. Rotary compressors are used for delivering
  12. Gas turbine as compared to steam turbine
  13. During peak load periods, the best method of controlling compressors is
  14. Which one of the following is the effect of blade shape on performance of a centrifugal compressor?
  15. The fuel consumption in gas turbines is accounted for by
  16. Isothermal compression efficiency, even when running at high speed, can be approached by using
  17. The thermal efficiency of a simple gas turbine for a given turbine inlet temperature with increase in…
  18. The most efficient method of compressing air is to compress it
  19. Rotary compressor is best suited for
  20. The overall efficiency of the compressed air system is the
  21. Reheating in a multistage expansion gas turbine __________ compressor work.
  22. A closed gas turbine in which fuel is burnt directly in the air is not possible because of
  23. The work ratio of a gas turbine plant is defined as the ratio of
  24. In open cycle turbojet engines used in military aircraft, reheating the exhaust gas from the turbine…
  25. An ideal air compressor cycle without clearance on PV diagram can be represented by following processes
  26. Propulsive efficiency is defined as ratio of
  27. For minimum work in multistage compression, assuming same index of compression in all stages
  28. A rocket engine for the combustion of its fuel
  29. Pick up the correct statement
  30. The combustion efficiency of a gas turbine using perfect combustion chamber is of the order of