The permeability of a material having a flux density of 5 Wb/m^2 is 10^-5 H/m. What is the value of magnetizing force?
5 × 10^-5 N/Wb
500 × 10^3 N/Wb
4 × 10^7N/Wb
4 × 10^7N/Wb
Correct Answer :
B. 500 × 10^3 N/Wb
Related Questions
If the distance between two magnetic poles decreases by 2 timesa the force between them
decreases two times
increases four times
increases two times
decreases four times
What revolves about the positive nucleus in a definite orbit?
Atom
Proton
Electron
Neutron
The magnitude of the induced emf in a coil is directly proportional to the rate of change of flux linkages. This is known as
Joule's Law
Faraday's second law of electromagnetic induction
Faraday's first law of electromagnetic induction
Coulomb's Law
The lagging effect between flux density of the material and the magne
Permeance
Eddy current
Hysteresis
R eluctance
Lenz' law states that the direction of the induced emf and hence current
Is determined by the rate of current flux
Is found by the right hand rule
Is found by the left hand rule
Always opposes the cause producing it
The straight line passing through the two poles of magnet is called
Real axis
Cartesian axis
Magnetic axis
Imaginary axis
Defined as the number of lines per unit area through any substance in a plane at right angles to the lines of force
Flux
Flux lines
Flux density
Flux intensity
Hipernik is an alloy containing __________ iron and __________ nickel.
40% ; 60%
60% ; 40%
50% ; 50%
70% ; 30%
The magnetic potential in a magnetic circuit can be measured in terms of
Mmf
Emf
Farad
Coulomb
As the magnetic intensity decreasesa the relative permeability of a magnetic material
decreases
remains the same
increases
becomes zero
Hysteresis loss can be reduced by one of the following.
Increasing mmf of the circuit
Using material narrow hysteresis loop
Using ferromagnetic core
Laminating the magnetic circuit
A 200-watt lamp working for 24 hours will consume approximately _____ units.
Which of the following is a vector quantity?
Magnetic potential
Magnetic field intensity
Magnetic permeability
F lux density
How is mutual inductance between two coils decreased?
By using a common core
By moving the coils closer
By moving the coils apart
By increasing the number of turns of either coil
When a conductor is stationary and the magnetic field is moving or changing the emf induced is called
Statically induced emf
Mutually induced emf
Self induced emf
Dynamically induced emf
The energy stored in an electrostatic field or electromagnetic field is called
Electromagnetic energy
Kinetic energy
Potential energy
R est energy
In electro-mechanical conversion devices like generators and motors the reason why a small air gap is left between the rotor and stator is to
permit mechanical clearance
increase flux density in air gap
decrease the reluctance of magnetic path
complete the magnetic path
Back emf refers to the
Current equal to the applied emf
Opposing emf
Current opposing the applied emf
Voltage opposing the applied emf
Bonding of atoms that is due to the force of attraction between positive ions and a group of negative ions
Ionic bond
Covalent Bond
Electrostatic Bond
Metallic bond
The mass of proton is __________ the mass of an electron.
equal to
about 1837 times
less than
200 tim es
The resistance of a material is ____________ its area of cross-section.
directly proportional
independent of
inversely proportional to
equal to
______ is an electromagnet with its core in the form of a close magnetic ring.
S olenoid
Paraboloid
Toroid
Cycloid
Hysteresis is a phenomenon of _________ in a magnetic circuit.
setting up constant flux
lagging of H behind B
lagging B behind H
leading B ahead H
What is the other name for dielectric strength?
Breakdown voltage
Electric intensity
Potential gradient
Dielectric constant
What type of bond is formed when there exists some form of collective interactions between the (negatively charged) electrons and (positively charged) nuclei in a solid?
Ionic
Covalent
Metallic
Van der Waals
If the value of 25 a conductor is 1/255 per oCa then the value of 20is
1/300 per oC
1/250 peroC
1/230 per oC
1/260 per oC
Which of the following has the least number of valence electrons?
Conductor
Semiconductor
Insulator
Semi- insulator
The temperature coefficient of resistance of insulators is
zero
negative
positive
infinite
Amorphous solid is also called
Crystalline
Non- crystalline
Polycrystalline
Homogenous
The force which set ups or tends to set up magnetic flux in a magnetic circuit
Dynamic force
Electromotive force
Potential difference
Magnetomotive force