The Press-Pull tool will ________ the face of a solid model in the direction it faces.

A. Taper

B. Extrude

C. Spiral

D. None of the above

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. In this type of auxiliary view, a break line is used to indicate the imaginary break in the views:
  2. This is how axonometric, oblique, and perspective sketches show objects:
  3. This is the bottom surface joining the sides of two adjacent threads:
  4. When only a small section of an interior area needs to be revealed the drafter can use a ________ section.
  5. This is the term for the range of tightness or looseness resulting from the allowances and tolerances…
  6. Elevation drawings will include information about ________.
  7. The most common geometric form used in gears today is this:
  8. This type of section is not in direct projection from the view containing the cutting plane:
  9. An oil refinery relies on which type of drafter to maintain and update the technical piping drawings…
  10. The ________ tool on the Dimension tool bar will place several dimensions at one time by using a selection…
  11. This is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic…
  12. These are used to attach parts to a cylinder so they won't turn on it:
  13. The 3-D commands on the Modeling toolbar include ________.
  14. A round is a rounded surface on the ________ corner of a part.
  15. Architectural drafters generally prefer to use ________ drawings to help illustrate 3-dimensional views…
  16. This is formed where three or more surfaces intersect:
  17. Perspective drawings are classified according to their number of these features:
  18. These maps are used to plan construction projects that locate construction features so they fit the…
  19. The text used on a typical detail sheet should be ________.
  20. This is a rounded exterior blend between surfaces:
  21. When creating a block the drafter needs to pay particular attention to selecting a base point because…
  22. This type of drawing is created to calculate areas, locate property lines, and locate building projects…
  23. The foundation contractor will work with the following architectural plans.
  24. This is an angled surface used on cylinders to make them easier to handle:
  25. An engineer's scale would be used to measure lines on a drawing where the scale factor reads ________.
  26. Oblique drawings are dimensioned in a similar fashion as these types of drawings:
  27. In isometric projection, all distances are approximately this percentage of their true size:
  28. Some of the standard Auto-CAD text styles used in architectural drawings includes ________.
  29. This type of solid is formed by sweeping a shape along a linear path:
  30. The edges of a cube in isometric projection make angles of this many degrees with each other: